This Ford 429-460 drag race flat bottom Pro Power pan is designed for chassis without x-members or steering links under the engine. It is 7-1/2" Deep in front and 8" Deep in the rear and holds 8 qts., system capacity is 9 qts. The large oil recovery pouch requires the right side mounting bolts to be accessed through plugs in the bottom of the pan. This pan requires our 13-769 pickup. Will work with late model stock starters. Modifications needed for use with some aftermarket blocks.
| Baffled | Yes |
| Capacity | 9 Quart System Capacity |
| Crank Scraper Included | No |
| Dipstick Port | Yes |
| Drain Plug Included | Yes |
| Engine | For Ford 429-460 Blocks |
| Feature 1 | Pro-Style Oil Recovery Pouch Extends Right Side of Pan Away From Crankshaft |
| Feature 2 | Recovery Pouch Thins Out Atmosphere of Oil in Crankcase and Frees up Horsepower |
| Feature 3 | Triple Trap Door Baffles For Oil Control |
| Feature 4 | Midsump Pickup Compartment |
| Feature 5 | Provision for Canton Pan Mounted Dipstick |
| Feature 6 | Magnetic Drain Plug |
| Finish | Silver Plating |
| Gasket or Seal Included | No |
| Hardware Included | No |
| Kicked Out | No |
| Material | 16 Gauge Steel |
| Pickup Included | No |
| Recommended Accessory 1 | 13-769 - 7/8" Dia. Pickup |
| Recommended Accessory 2 | 20-956 - Oil Pump Pickup Stud |
| Recommended Accessory 3 | 20-936 - One-way Screen Windage Tray |
| Recommended Accessory 4 | 20-946 - Windage Tray Mounting Kit |
| Recommended Accessory 5 | 20-850 - Universal Dipstick Kit 1/4" N.P.T. Fitting |
| Recommended Accessory 6 | 20-854 - Universal Steel Braided Dipstick Kit 1/4" N.P.T. Fitting |
| Recommended Accessory 7 | 21-066 - Ford 429-460 Main Support |
| Recommended Accessory 8 | 88-750 - Big Block Ford 429-460 Four Piece Oil Pan Gasket |
| Stoke | 4.5 inches |
| Sump Depth | 8 inches |
| Windage Tray Included | No |
Canton
This "T" style rear sump oil pan is designed for Ford 429/460 blocks in Cobras. It has a 7.5? deep, 13? wide by 12? long sump, with an 8 qt system capacity. This pan requires our 15-767 pickup...
Canton
This Fox Body drag race pro-style power pan is for Ford 289-302 blocks. It has a 9" deep by 7" long by 11" wide rear sump and a 7 qt. system capacity. The front sump is 6-1/2" deep. The large oil...
Canton
This Small Block Chevy "T" sump drag race oil pan is for pre-?80 blocks with a left side dipstick. It has a 8-1/2" deep, 9-1/2" long by 10-1/2" wide sump and an 8 qt system capacity. Clears a 3.875"...
Canton
This Drag Race Oil Pan is for pre-?85 Small Block Chevys with left side dipstick. It has an 8" deep by 9-1/2" long by 10-1/2" wide sump and a 7 qt. system capacity. Works with an aftermarket starter...
Canton
This bracket drag race oil pan is for Small Block Chevy pre-?80 blocks with left side dipstick and is designed to fit most stock chassis. It has an 8" deep by 9-1/2" long sump and a 6 qt. system...
