This SBC Corvette road race pan is for pre-?80 blocks with left side dipstick. It is designed for 84-96 Corvettes, but will fit in early Corvettes as well. It has a 7" deep, 13-3/4" wide, 12" long sump, with a 7 quart system capacity. Will work with stock starters. This pan requires one of our pickups.
| Baffled | Yes |
| Capacity | 7 Quart System Capacity |
| Crank Scraper Included | Yes |
| Dipstick Port | Yes |
| Drain Plug Included | Yes |
| Engine | For S.B. Chevy Pre-1980 Blocks |
| Feature 1 | Trap Door Baffle for Oil Control |
| Feature 2 | Crank Scraper |
| Feature 3 | Bolt in Windage Tray |
| Feature 4 | 1/2" NPT Temperature Bung |
| Feature 5 | Provision for Pan Mounted Dipstick |
| Feature 6 | 20mm Fitting for GM Low Oil Warning Sender |
| Finish | Silver Plating |
| Gasket or Seal Included | No |
| Hardware Included | No |
| Kicked Out | Yes |
| Material | 16 Gauge Steel |
| Pickup Included | No |
| Recommended Accessory 1 | 20-044 - Pickup for SBC Standard Volume Oil Pumps M55 & M55A |
| Recommended Accessory 2 | 20-049 - Pickup for SBC Standard Volume Oil Pump M155 with 3/4" Inlet |
| Recommended Accessory 3 | 20-074 - Pickup for SBC High Volume Oil Pump M55HV |
| Recommended Accessory 4 | 20-079 - Pickup for SBC High Volume Oil Pump M155HV with 3/4" Inlet |
| Recommended Accessory 5 | 20-850 - Universal Dipstick Kit 1/4" N.P.T. Fitting |
| Recommended Accessory 6 | 20-854 - Universal Steel Braided Dipstick Kit 1/4" N.P.T. Fitting |
| Recommended Accessory 7 | 22-405 - 20MM Plug for Oil Level Sender Port |
| Recommended Accessory 8 | 88-100 - SBC Pre ?85 Oil Pan Gasket |
| Stoke | 3.75 inches |
| Sump Depth | 7 inches |
| Sump Width | 13.75 inches |
| Windage Tray Included | Yes |
Canton
This SBC Corvette road race pan is for '80-'85 blocks with right side dipstick. It is designed for 84-96 Corvettes, but will fit in early Corvettes as well. It has a 7" deep, 13-3/4" wide, 12" long...
Canton
This SBC late Corvette road race pan is for ?86 and newer blocks with one piece seal. It is designed for 84-96 Corvettes, but will fit in early Corvettes as well. It has a 7" deep, 13-3/4" wide, 12"...
Canton
This oil pan is the perfect solution for Honda K series motors. Notched to fit most production chassis this pan provides superior oiling control over the stock pan. This pan may require some cross...
Canton
Cantons new 15-738 Ford 5.0 Coyote oil pan is designed for early Ford chassis and others that required a front sump oil pan. The pan is designed with a ?t?sump for extra capacity and is used in road...
Canton
This road race pan is for '86 and newer SBC blocks in '93-'97 F-Bodies. (also fits Impalas) It has a 7-1/2" deep, 12" wide, 8-1/4" long sump for a 6 qt. system capacity. Will work with stock starter...
