This SBC road race oil pan is for pre-?80 blocks with left side dipstick. It is designed for x-member clearance in '78 and up F bodies, without cross over exhaust. It has a 7-1/2" deep, 13-3/4" wide, 10-1/2" long sump, for a 7 quart system capacity. This pan can not be used with cross-over exhaust. This pan requires one of our pickups.
| Baffled | Yes |
| Capacity | 7 Quart System Capacity |
| Crank Scraper Included | Yes |
| Dipstick Port | No |
| Drain Plug Included | Yes |
| Engine | For S.B. Chevy Pre-1980 Blocks |
| Feature 1 | Trap Door Baffle for Oil Control |
| Feature 2 | Crank Scraper |
| Feature 3 | Bolt in Windage Tray |
| Feature 4 | 1/2" NPT Temperature Bung |
| Finish | Silver Plating |
| Gasket or Seal Included | No |
| Hardware Included | No |
| Kicked Out | Yes |
| Material | 16 Gauge Steel |
| Pickup Included | No |
| Recommended Accessory 1 | 20-010 - Pickup for SBC Standard Volume Oil Pumps M55 & M55A |
| Recommended Accessory 2 | 20-013 - Pickup for SBC Standard Volume Oil Pump M155 with 3/4" Inlet |
| Recommended Accessory 3 | 20-020 - Pickup for SBC High Volume Oil Pump M55HV |
| Recommended Accessory 4 | 20-023 - Pickup for SBC High Volume Oil Pump M155HV with 3/4" Inlet |
| Recommended Accessory 5 | 20-850 - Universal Dipstick Kit 1/4" N.P.T. Fitting |
| Recommended Accessory 6 | 20-854 - Universal Steel Braided Dipstick Kit 1/4" N.P.T. Fitting |
| Recommended Accessory 7 | 20-021 - Bolt-On Pickup for Melling M10555 Pumps |
| Recommended Accessory 8 | 88-100 ? SBC Pre ?85 Oil Pan Gasket |
| Stoke | 3.75 inches |
| Sump Depth | 7.5 inches |
| Sump Width | 13.75 inches |
| Windage Tray Included | Yes |
Canton
This oil pan is the perfect solution for Honda K series motors. Notched to fit most production chassis this pan provides superior oiling control over the stock pan. This pan may require some cross...
Canton
Cantons new 15-738 Ford 5.0 Coyote oil pan is designed for early Ford chassis and others that required a front sump oil pan. The pan is designed with a ?t?sump for extra capacity and is used in road...
Canton
This road race pan is for '86 and newer SBC blocks in '93-'97 F-Bodies. (also fits Impalas) It has a 7-1/2" deep, 12" wide, 8-1/4" long sump for a 6 qt. system capacity. Will work with stock starter...
Canton
This ?T? Sump oil pan is for AMC V8s in production chassis. It has an 8" deep, 10-1/2" wide, and 9" long sump that holds 8 quarts, 9 quarts with filter. This pan requires our 15-555 pickup kit for...
Canton
This "T" style rear sump oil pan is for Ford 289-302 blocks in Fox Body Mustangs. It has a 7-1/2" deep by 8" long by 13-1/2" wide sump and a 7 quart system capacity. This pan can be used with a stock...
