This front sump road race pan is for Ford 351 Windsor blocks. It has an 8" deep, 13-1/2" wide front sump with a 9 qt. system capacity. Will work with stock & aftermarket starters. This pan requires our 15-661 pickup.
| Baffled | Yes |
| Capacity | 9 Quart System Capacity |
| Crank Scraper Included | Yes |
| Dipstick Port | Yes |
| Drain Plug Included | Yes |
| Feature 1 | 9 qt System Capacity |
| Feature 2 | Diamond Shape Road Race Baffle Assembly With Four Trap Doors |
| Feature 3 | Crank Scraper |
| Feature 4 | Removable Windage/Anti-Slosh Baffle |
| Feature 5 | 1/2" NPT Temperature Bung |
| Feature 6 | Provision For Our Pan Mounted Dipstick |
| Feature 7 | Magnetic Drain Plug |
| Finish | Silver Plating |
| Gasket or Seal Included | No |
| Hardware Included | No |
| Kicked Out | Yes |
| Material | 16 Gauge Steel |
| Pickup Included | No |
| Recommended Accessory 1 | 15-661 - Pickup with 3/4" Dia. Inlet |
| Recommended Accessory 2 | 20-850 - Universal Dipstick Kit 1/4" N.P.T. Fitting |
| Recommended Accessory 3 | 20-854 - Universal Steel Braided Dipstick Kit 1/4" N.P.T. Fitting |
| Recommended Accessory 4 | 88-650 ? Small Block Ford 351W Four Piece Oil Pan Gasket |
| Stoke | 4.0 inches |
| Sump Depth | 8 inches |
| Sump Width | 13.5 inches |
| Windage Tray Included | No |
Canton
This front sump road race pan is for Ford 351 Windsor blocks. It has a 9 qt. system capacity, 8" deep, 12" wide, 14 ga. sump designed with 14 gauge steel for Cobra kit cars. Will work with stock...
Canton
This oil pan is the perfect solution for Honda K series motors. Notched to fit most production chassis this pan provides superior oiling control over the stock pan. This pan may require some cross...
Canton
Cantons new 15-738 Ford 5.0 Coyote oil pan is designed for early Ford chassis and others that required a front sump oil pan. The pan is designed with a ?t?sump for extra capacity and is used in road...
Canton
This road race pan is for '86 and newer SBC blocks in '93-'97 F-Bodies. (also fits Impalas) It has a 7-1/2" deep, 12" wide, 8-1/4" long sump for a 6 qt. system capacity. Will work with stock starter...
Canton
This SBC road race oil pan is for pre-?80 blocks with left side dipstick. It is designed for x-member clearance in '78 and up F bodies, without cross over exhaust. It has a 7-1/2" deep, 13-3/4"...
