Our Oil Cooler Thermostat helps your engine?s oil come up to temperature quickly and holds it at the right temperature. Cold oil does not flow and does not lubricate correctly. Plus, moving cold oil robs power. This thermostat is designed to bypass the cooler until the oil reaches 215 degrees. At 215 degrees water condensation in the oil will evaporate and the oil will be warm enough to flow and lubricate properly. The thermostat housing is machined from a 3-1/4" square 6061 T6 aluminum extrusion. Thermostats are 6" tall and come with a black and clear anodized finish and stainless steel mounting clamp. The oil ports accept 1-1/16" -12 O-ring fittings. (4 fittings required per unit)
| Feature 1 | The thermostat housing is machined from a 3-1/4" square 6061 T6 aluminum extrusion |
| Feature 2 | Thermostats are 6" tall |
| Feature 3 | Comes with a black and clear aNodized finish and stainless steel mounting clamp |
| Feature 4 | Oil ports accept 1-1/16" -12 O-ring fittings |
| Feature 5 | Made in USA |
| Recommended Accessory 1 | 23-465A 1-1/16" -12 port to -10 male AN (2 pack) |
| Recommended Accessory 2 | 23-466A 1-1/16" -12 port to -12 male AN (2 pack) |
| Recommended Accessory 3 | 26-891B Stainless steel filter clamp can be used to mount this thermostat |
| Recommended Accessory 4 | 26-892B Billet filter clamp can be used to mount this thermostat |
Canton
This Universal Oil Cooler Sandwich Adapter has 13/16"-16 thread and a 2-5/8" O-Ring. It provides an in and out port for installing an oil cooler in almost any application. It mounts between the oil...
Canton
This universal oil input adapter has 3/4" -16 thread and a 2-5/8" standard O-Ring. This adapter provides one 1/2" N.P.T. oil input port before filtration. The adapter mounts between the oil filter...
Canton
This billet aluminum spin-on filter mount is designed to install under the pan rail of our LS1 pans. The mount uses the same 13/16 -16 thread filter nipple as stock to accept standard LS1 filters and...
Canton
This Chevy SBC Remote Oil Cooler Sandwich Adapter goes to cooler after filtration. It provides an in and out port for installing an oil cooler. It mounts between the oil filter and block, replacing...
Canton
1/2" -20 Magnetic Drain Plug & Washer. This magnetic drain plug collects steel particles, keeping your oiling system clean and allowing you to check for problems. It includes a copper washer...
