×
close

Shopping Cart:

Toggle menu
1-321-400-8080

24/7 Customer Service
0

$0.00

0
Cardone 18-4087 | Disc Brake Caliper
click to zoom in

Cardone 18-4087 | Disc Brake Caliper

(No reviews yet) Write a Review
$120.59
Part Number
CAD18-4087
UPC:
82617011228
Condition:
New
5 customers are viewing this product

video gallery

Description

Expertly remanufactured to rigorous quality and performance standards, all CARDONE Brake Calipers are equipped with brand-new, premium components to guarantee exceptional longevity and reliability. These remanufactured brake calipers are 100% pressure-tested to deliver consistent, industry-leading brake performance. Each unit arrives with a complete set of brand-new hardware for a simple, complete installation. Caliper bracket is included when applicable.

BRAND: Cardone Reman

FEATURES:

  • Caliper, Brake Caliper, Disc Brake Caliper, Unloaded Caliper, Unloaded Brake Caliper, Power Brake Caliper, Hydraulic Disc Brake Caliper, Brakes
  • Chevrolet C30 1978-75, C30 Pickup 1974-71, G30 1978-75, G30 Van 1974-71, K30 1978-77, P30 1978-75, P30 Van 1974-71; Freightliner MT35 2005-97, MT45 2005-98, MT55 2005-99; GMC C35 1978-75, C35/C3500 Pickup 1974-71, G35 1978-75, G35/G3500 Van 1974-71, K35 1
  • Reman. Unloaded Caliper
  • Remanufactured Unloaded Caliper
  • Unloaded Caliper

SPECIFICS:

Brake Caliper FinishOil Emulsion
Caliper ColorGray
E-WasteNo
FAQsBrake squeal can be caused by improper installation of the brake pads, improperly installed brake hardware and improper brake rotor finish.
FAQsWhat type of fluid should I use: DOT 3, DOT 4, or DOT 5?
FAQsBrakes squeal all of the time. What's causing the squeal?
FAQsDo all of your Calipers come with the new hardware and a mounting bracket for installation?
FAQsNot recommended. The O.E. manufacturers specified steel or phenolic pistons based on the intended use of the vehicle. It is recommended that the installer follow the manufacturer’s recommendations.
FAQsAs a rule, always use brake fluid recommended by O.E. The fluid type is stamped on the master cylinder reservoir lid. Always use new fluid in a sealed container.
FAQsA symptom of a low brake pedal is usually caused by air in the system, misadjusted rear brake shoes, deteriorated brake hose(s) or a defective master cylinder.
FAQsWhat type of grease is used on floating caliper mounting pins?
FAQsCan I switch out a Phenolic Piston Caliper for a Steel Piston Caliper or vice versa?
FAQsCould calipers be the cause of a low brake pedal?
FAQsInspect both calipers for binding or sticky slides or pins. Also ensure that brake hoses are not collapsed or restricted and inspect steering/suspension components for proper operation.
FAQsA silicone grease is used on floating caliper mounting pins.
FAQsCar pulls to one side during braking. Why?
FAQsNew hardware is included with all of our Calipers however the mounting bracket is an added option depending on part number and application. Mounting Brackets are also sold separately for most applications.
Features and BenefitsRubber seals are replaced with new high temperature EPDM rubber for extended life and optimum performance.
Features and BenefitsNew bleeder screws provide trouble-free bleeding and a positive seal.
Features and BenefitsNew washers are included where applicable for a proper seal.
Features and BenefitsAs a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit.
Features and BenefitsMounting bracket is included where applicable for a hassle-free installation.
Features and BenefitsOur remanufacturing process is earth-friendly, as it reduces the energy and raw material needed to make a new part by 80%.
Features and BenefitsA plastic cap plug protects every brake port thread to ensure trouble-free installation.
Features and BenefitsCalipers are treated with a special formulated rust inhibitor and kept in the original equipment finish.
Features and BenefitsNew banjo bolts are included where applicable to ensure a perfect fit and quick installation.
Features and BenefitsNew stainless steel hardware clips and new mounting pins are included where applicable.
Features and BenefitsPistons are durable, resistant to cracking or pitting and handle great loads.
Installation Hardware IncludedYes
Mounting Bolts IncludedNo
Package ContentsCaliper; Hardware Kit
Pads IncludedNo
Piston MaterialSteel
Piston Quantity1
Piston Size (OD) (in)3.368
Piston Size (OD) (mm)85.5472
Product ConditionRemanufactured

WARRANTY TIME: 24 Months

INTERCHANGE:

  • GMC: 474110
  • Chevrolet: 474110
  • International Harvester (IHC): 593689C91
  • GMC: 464110
  • Chevrolet: 464110

APPLICATIONS:

  • 1988-1989 International S1654LP - Position: Front Left
  • 1971-1974 GMC G35/G3500 Van - Position: Front Right
  • 1982-1982 International S1823 - Position: Front Left
  • 1999-2005 Freightliner MT55 - Position: Rear Right
  • 1984-1989 International S1954 - Position: Front Left
  • 1990-1997 International 4700LP - Position: Front Left
  • 1982-1984 International 1724 - Position: Front Left
  • 1982-1984 International 1824 - Position: Front Left
  • 1982-1989 International 1654 - Position: Front Left
  • 1987-1989 International S1853FC - Position: Front Left
  • 1982-1984 International S1724 - Position: Front Left
  • 1999-2005 Freightliner MT55 - Position: Front Right
  • 1982-1989 International 1854 - Position: Front Left
  • 1975-1978 Chevrolet G30 - Position: Front Right
  • 1992-1997 International 3600 - Position: Front Left
  • 1998-2005 Freightliner MT45 - Position: Front Right
  • 1990-1990 International 4600UH - Position: Front Left
  • 1990-1997 International 4900 - Position: Front Left
  • 1982-1982 International S1823 - Position: Rear Left
  • 1971-1974 Chevrolet G30 Van - Position: Front Right
  • 1975-1978 GMC G35 - Position: Front Right
  • 1982-1989 International S1854 - Position: Front Left
  • 1971-1974 Chevrolet P30 Van - Position: Front Right
  • 1982-1983 International 2155 - Position: Rear Left
  • 1990-1997 International 3800 - Position: Front Left
  • 1971-1974 GMC C35/C3500 Pickup - Position: Front Right
  • 1996-1997 International 3400 - Position: Front Left
  • 1982-1983 International S1854 - Position: Rear Left
  • 1990-1997 International 4700 - Position: Front Left
  • 1975-1978 Chevrolet P30 - Position: Front Right
  • 1982-1985 International S1723 - Position: Front Left
  • 1982-1989 International S1754 - Position: Front Left
  • 1982-1983 International 1754 - Position: Rear Left
  • 1997-1997 International 3000FE - Position: Front Left
  • 1982-1989 International 1754 - Position: Front Left
  • 1971-1974 Chevrolet C30 Pickup - Position: Front Right
  • 1998-2005 Freightliner MT45 - Position: Rear Right
  • 1990-1994 International 4600LP - Position: Front Left
  • 1975-1978 GMC C35 - Position: Front Right
  • 1982-1983 International S1754 - Position: Rear Left
  • 1982-1989 International 2155 - Position: Front Left
  • 1996-1997 International 3000 - Position: Front Left
  • 1982-1983 International 1654 - Position: Rear Left
  • 1996-1997 International 3000RE - Position: Front Left
  • 1982-1983 International S1724 - Position: Rear Left
  • 1984-1989 International 1955 - Position: Front Left
  • 1997-2005 Freightliner MT35 - Position: Front Right
  • 1990-1994 International 3700 - Position: Front Left
  • 1990-1991 International 1652UPS - Position: Front Left
  • 1982-1983 International S1824 - Position: Rear Left
  • 1982-1983 International 1824 - Position: Rear Left
  • 1984-1989 International S1955 - Position: Front Left
  • 1982-1983 International 1724 - Position: Rear Left
  • 1987-1989 International M1600 Metro II - Position: Front Left
  • 1984-1989 International S2155 - Position: Front Left
  • 1984-1989 International S1654 - Position: Front Left
  • 1982-1982 International S1624 - Position: Front Left
  • 1997-2005 Freightliner MT35 - Position: Rear Right
  • 1987-1989 International M1400 Metro II - Position: Front Left
  • 1977-1978 Chevrolet K30 - Position: Front Right
  • 1977-1978 Chevrolet P30 - Position: Rear Right
  • 1990-1997 International 4800 - Position: Front Left
  • 1982-1984 International S1824 - Position: Front Left
  • 1987-1992 International 1452SC - Position: Front Left
  • 1982-1983 International S1853 - Position: Rear Left
  • 1971-1974 GMC P35/P3500 Van - Position: Front Right
  • 1975-1978 Chevrolet C30 - Position: Front Right
  • 1982-1982 International S1624 - Position: Rear Left
  • 1974-1975 International 200 - Position: Front Right
  • 1995-1997 International 1652UPS - Position: Front Left
  • 1984-1989 International S1753 - Position: Front Left
  • 1982-1983 International S1723 - Position: Rear Left
  • 1977-1978 GMC P35 - Position: Rear Right
  • 1990-1992 International 7100 - Position: Front Left
  • 1991-1994 International 3900FC - Position: Front Left
  • 1984-1989 International 1954 - Position: Front Left
  • 1995-1997 International 4700LPX - Position: Front Left
  • 1982-1989 International S1853 - Position: Front Left
  • 1977-1978 GMC K35 - Position: Front Right
  • 1987-1997 International 1652SC - Position: Front Left
  • 1990-1995 International 4600 - Position: Front Left
  • 1975-1978 GMC P35 - Position: Front Right
  • 1982-1983 International 1854 - Position: Rear Left
  • 1993-1993 International 1652UPS - Position: Front Left

Attributes
Product type:
Aftermarket
Features and Benefits:
Expertly remanufactured to rigorous quality and performance standards, all CARDONE Brake Calipers are equipped with brand-new, premium components to guarantee exceptional longevity and reliability. These remanufactured brake calipers are 100% pressur
Brand Description:
Brake Caliper
Hazardous Material:
No
Minimum Order Quantity:
1
Package Contents:
Caliper; Instruction Sheet; Hardware Kit
Installation Hardware Included:
Yes
Product Condition:
Remanufactured
E-Waste:
No
FAQs:
Can I switch out a Phenolic Piston Caliper for a Steel Piston Caliper or vice versa?
FAQs:
Brakes squeal all of the time. What's causing the squeal?
FAQs:
Brake squeal can be caused by improper installation of the brake pads, improperly installed brake hardware and improper brake rotor finish.
FAQs:
As a rule, always use brake fluid recommended by O.E. The fluid type is stamped on the master cylinder reservoir lid. Always use new fluid in a sealed container.
FAQs:
A symptom of a low brake pedal is usually caused by air in the system, misadjusted rear brake shoes, deteriorated brake hose(s) or a defective master cylinder.
FAQs:
A silicone grease is used on floating caliper mounting pins.
FAQs:
What type of grease is used on floating caliper mounting pins?
FAQs:
What type of fluid should I use: DOT 3, DOT 4, or DOT 5?
FAQs:
Not recommended. The O.E. manufacturers specified steel or phenolic pistons based on the intended use of the vehicle. It is recommended that the installer follow the manufacturer’s recommendations.
FAQs:
New hardware is included with all of our Calipers however the mounting bracket is an added option depending on part number and application. Mounting Brackets are also sold separately for most applications.
FAQs:
Inspect both calipers for binding or sticky slides or pins. Also ensure that brake hoses are not collapsed or restricted and inspect steering/suspension components for proper operation.
FAQs:
Do all of your Calipers come with the new hardware and a mounting bracket for installation?
FAQs:
Could calipers be the cause of a low brake pedal?
Life Cycle Status:
Available to Order
FAQs:
Car pulls to one side during braking. Why?
Life Cycle Status Description:
Available to Order - Part is released to customers for ordering.
Features and Benefits:
Rubber seals are replaced with new high temperature EPDM rubber for extended life and optimum performance.
Item Level GTIN:
00082617011228
Features and Benefits:
Pistons are durable, resistant to cracking or pitting and handle great loads.
Quantity Per Application:
1
Features and Benefits:
Our remanufacturing process is earth-friendly, as it reduces the energy and raw material needed to make a new part by 80%.
Features and Benefits:
New washers are included where applicable for a proper seal.
Features and Benefits:
New stainless steel hardware clips and new mounting pins are included where applicable.
Features and Benefits:
New bleeder screws provide trouble-free bleeding and a positive seal.
Features and Benefits:
New banjo bolts are included where applicable to ensure a perfect fit and quick installation.
Features and Benefits:
Mounting bracket is included where applicable for a hassle-free installation.
Features and Benefits:
Calipers are treated with a special formulated rust inhibitor and kept in the original equipment finish.
Features and Benefits:
As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit.
Features and Benefits:
A plastic cap plug protects every brake port thread to ensure trouble-free installation.
Caliper Color:
Gray
Piston Quantity:
1
Piston Material:
Steel
Brake Caliper Finish:
Oil Emulsion
Pads Included:
No
Mounting Bolts Included:
No
Piston Size (OD) (mm):
85.55
Piston Size (OD) (in):
3.37
Mounting Type:
0.44
Bleeder Port Size:
3/8x24
Short Description:
Caliper
Country of Origin:
United States
Weight - Each (Gross Pounds):
17.4800
Height - Each (Inch):
5.2500
Length - Each (Inch):
9.5630
Width - Each (Inch):
7.2500



Need help? We're available at1-321-400-8080 - Email us atinfo@partsonnet.net orlive help
to top