×
close

Shopping Cart:

Toggle menu
1-321-400-8080

24/7 Customer Service
0

$0.00

0
Cardone 18-4088 | Disc Brake Caliper
click to zoom in

Cardone 18-4088 | Disc Brake Caliper

(No reviews yet) Write a Review
$67.14
Part Number
CAD18-4088
UPC:
82617011235
Condition:
New
5 customers are viewing this product

video gallery

Description

Expertly remanufactured to rigorous quality and performance standards, all CARDONE Brake Calipers are equipped with brand-new, premium components to guarantee exceptional longevity and reliability. These remanufactured brake calipers are 100% pressure-tested to deliver consistent, industry-leading brake performance. Each unit arrives with a complete set of brand-new hardware for a simple, complete installation. Caliper bracket is included when applicable.

BRAND: Cardone Reman

FEATURES:

  • Caliper, Brake Caliper, Disc Brake Caliper, Unloaded Caliper, Unloaded Brake Caliper, Power Brake Caliper, Hydraulic Disc Brake Caliper, Brakes
  • Chevrolet C30 1978-75, C30 Pickup 1974-71, G30 1978-75, G30 Van 1974-71, K30 1978-77, P30 1978-75, P30 Van 1974-71; Freightliner MT35 2005-97, MT45 2005-98, MT55 2005-99; GMC C35 1978-75, C35/C3500 Pickup 1974-71, G35 1978-75, G35/G3500 Van 1974-71, K35 1
  • Reman. Unloaded Caliper
  • Remanufactured Unloaded Caliper
  • Unloaded Caliper

SPECIFICS:

Brake Caliper FinishOil Emulsion
Caliper ColorGray
E-WasteNo
FAQsDo all of your Calipers come with the new hardware and a mounting bracket for installation?
FAQsNot recommended. The O.E. manufacturers specified steel or phenolic pistons based on the intended use of the vehicle. It is recommended that the installer follow the manufacturer’s recommendations.
FAQsBrakes squeal all of the time. What's causing the squeal?
FAQsBrake squeal can be caused by improper installation of the brake pads, improperly installed brake hardware and improper brake rotor finish.
FAQsA silicone grease is used on floating caliper mounting pins.
FAQsCan I switch out a Phenolic Piston Caliper for a Steel Piston Caliper or vice versa?
FAQsA symptom of a low brake pedal is usually caused by air in the system, misadjusted rear brake shoes, deteriorated brake hose(s) or a defective master cylinder.
FAQsWhat type of grease is used on floating caliper mounting pins?
FAQsCar pulls to one side during braking. Why?
FAQsInspect both calipers for binding or sticky slides or pins. Also ensure that brake hoses are not collapsed or restricted and inspect steering/suspension components for proper operation.
FAQsCould calipers be the cause of a low brake pedal?
FAQsNew hardware is included with all of our Calipers however the mounting bracket is an added option depending on part number and application. Mounting Brackets are also sold separately for most applications.
FAQsWhat type of fluid should I use: DOT 3, DOT 4, or DOT 5?
FAQsAs a rule, always use brake fluid recommended by O.E. The fluid type is stamped on the master cylinder reservoir lid. Always use new fluid in a sealed container.
Features and BenefitsNew stainless steel hardware clips and new mounting pins are included where applicable.
Features and BenefitsA plastic cap plug protects every brake port thread to ensure trouble-free installation.
Features and BenefitsMounting bracket is included where applicable for a hassle-free installation.
Features and BenefitsNew bleeder screws provide trouble-free bleeding and a positive seal.
Features and BenefitsNew washers are included where applicable for a proper seal.
Features and BenefitsOur remanufacturing process is earth-friendly, as it reduces the energy and raw material needed to make a new part by 80%.
Features and BenefitsAs a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit.
Features and BenefitsPistons are durable, resistant to cracking or pitting and handle great loads.
Features and BenefitsRubber seals are replaced with new high temperature EPDM rubber for extended life and optimum performance.
Features and BenefitsNew banjo bolts are included where applicable to ensure a perfect fit and quick installation.
Features and BenefitsCalipers are treated with a special formulated rust inhibitor and kept in the original equipment finish.
Installation Hardware IncludedYes
Mounting Bolts IncludedNo
Package ContentsCaliper; Hardware Kit
Pads IncludedNo
Piston MaterialSteel
Piston Quantity1
Piston Size (OD) (in)3.368
Piston Size (OD) (mm)85.5472
Product ConditionRemanufactured

WARRANTY TIME: 24 Months

INTERCHANGE:

  • International Harvester (IHC): 593690C91
  • Chevrolet: 464109
  • GMC: 474109
  • GMC: 464109
  • Chevrolet: 474109

APPLICATIONS:

  • 1990-1997 International 4700LP - Position: Front Right
  • 1990-1997 International 4800 - Position: Front Right
  • 1975-1978 Chevrolet P30 - Position: Front Left
  • 1982-1983 International 1754 - Position: Rear Right
  • 1982-1984 International 1724 - Position: Front Right
  • 1982-1983 International S1723 - Position: Rear Right
  • 1982-1983 International S1854 - Position: Rear Right
  • 1971-1974 Chevrolet C30 Pickup - Position: Front Left
  • 1982-1984 International 1824 - Position: Front Right
  • 1984-1989 International 1954 - Position: Front Right
  • 1996-1997 International 3400 - Position: Front Right
  • 1975-1978 GMC P35 - Position: Front Left
  • 1990-1990 International 4600UH - Position: Front Right
  • 1990-1997 International 4700 - Position: Front Right
  • 1977-1978 Chevrolet P30 - Position: Rear Left
  • 1996-1997 International 3000 - Position: Front Right
  • 1982-1983 International 1854 - Position: Rear Right
  • 1982-1983 International S1824 - Position: Rear Right
  • 1997-2005 Freightliner MT35 - Position: Front Left
  • 1990-1994 International 3700 - Position: Front Right
  • 1982-1982 International S1624 - Position: Front Right
  • 1987-1989 International M1400 Metro II - Position: Front Right
  • 1975-1978 GMC G35 - Position: Front Left
  • 1982-1989 International S1754 - Position: Front Right
  • 1988-1989 International S1654LP - Position: Front Right
  • 1984-1989 International S1955 - Position: Front Right
  • 1990-1997 International 4900 - Position: Front Right
  • 1982-1982 International S1823 - Position: Front Right
  • 1971-1974 Chevrolet P30 Van - Position: Front Left
  • 1977-1978 GMC P35 - Position: Rear Left
  • 1975-1978 GMC C35 - Position: Front Left
  • 1999-2005 Freightliner MT55 - Position: Rear Left
  • 1982-1983 International 1824 - Position: Rear Right
  • 1984-1989 International S2155 - Position: Front Right
  • 1995-1997 International 1652UPS - Position: Front Right
  • 1982-1989 International 1754 - Position: Front Right
  • 1984-1989 International 1955 - Position: Front Right
  • 1971-1974 GMC C35/C3500 Pickup - Position: Front Left
  • 1982-1989 International S1854 - Position: Front Right
  • 1982-1989 International S1853 - Position: Front Right
  • 1997-1997 International 3000FE - Position: Front Right
  • 1982-1983 International S1853 - Position: Rear Right
  • 1982-1983 International 2155 - Position: Rear Right
  • 1982-1984 International S1824 - Position: Front Right
  • 1982-1985 International S1723 - Position: Front Right
  • 1998-2005 Freightliner MT45 - Position: Front Left
  • 1984-1989 International S1954 - Position: Front Right
  • 1977-1978 Chevrolet K30 - Position: Front Left
  • 1971-1974 GMC G35/G3500 Van - Position: Front Left
  • 1990-1992 International 7100 - Position: Front Right
  • 1982-1983 International S1724 - Position: Rear Right
  • 1987-1989 International M1600 Metro II - Position: Front Right
  • 1975-1978 Chevrolet C30 - Position: Front Left
  • 1990-1995 International 4600 - Position: Front Right
  • 1982-1983 International 1654 - Position: Rear Right
  • 1996-1997 International 3000RE - Position: Front Right
  • 1992-1997 International 3600 - Position: Front Right
  • 1993-1993 International 1652UPS - Position: Front Right
  • 1971-1974 GMC P35/P3500 Van - Position: Front Left
  • 1977-1978 GMC K35 - Position: Front Left
  • 1990-1994 International 4600LP - Position: Front Right
  • 1999-2005 Freightliner MT55 - Position: Front Left
  • 1984-1989 International S1753 - Position: Front Right
  • 1990-1991 International 1652UPS - Position: Front Right
  • 1987-1997 International 1652SC - Position: Front Right
  • 1982-1984 International S1724 - Position: Front Right
  • 1982-1983 International 1724 - Position: Rear Right
  • 1982-1989 International 2155 - Position: Front Right
  • 1984-1989 International S1654 - Position: Front Right
  • 1987-1992 International 1452SC - Position: Front Right
  • 1982-1982 International S1624 - Position: Rear Right
  • 1971-1974 Chevrolet G30 Van - Position: Front Left
  • 1982-1989 International 1854 - Position: Front Right
  • 1990-1997 International 3800 - Position: Front Right
  • 1991-1994 International 3900FC - Position: Front Right
  • 1982-1982 International S1823 - Position: Rear Right
  • 1997-2005 Freightliner MT35 - Position: Rear Left
  • 1974-1975 International 200 - Position: Front Left
  • 1982-1983 International S1754 - Position: Rear Right
  • 1975-1978 Chevrolet G30 - Position: Front Left
  • 1998-2005 Freightliner MT45 - Position: Rear Left
  • 1982-1989 International 1654 - Position: Front Right
  • 1987-1989 International S1853FC - Position: Front Right
  • 1995-1997 International 4700LPX - Position: Front Right

Attributes
Product type:
Aftermarket
Features and Benefits:
Expertly remanufactured to rigorous quality and performance standards, all CARDONE Brake Calipers are equipped with brand-new, premium components to guarantee exceptional longevity and reliability. These remanufactured brake calipers are 100% pressur
Brand Description:
Brake Caliper
Hazardous Material:
No
Minimum Order Quantity:
1
Package Contents:
Caliper; Instruction Sheet; Hardware Kit
Installation Hardware Included:
Yes
Product Condition:
Remanufactured
E-Waste:
No
FAQs:
What type of grease is used on floating caliper mounting pins?
FAQs:
What type of fluid should I use: DOT 3, DOT 4, or DOT 5?
FAQs:
Not recommended. The O.E. manufacturers specified steel or phenolic pistons based on the intended use of the vehicle. It is recommended that the installer follow the manufacturer’s recommendations.
FAQs:
New hardware is included with all of our Calipers however the mounting bracket is an added option depending on part number and application. Mounting Brackets are also sold separately for most applications.
FAQs:
Inspect both calipers for binding or sticky slides or pins. Also ensure that brake hoses are not collapsed or restricted and inspect steering/suspension components for proper operation.
FAQs:
Do all of your Calipers come with the new hardware and a mounting bracket for installation?
FAQs:
Could calipers be the cause of a low brake pedal?
FAQs:
Car pulls to one side during braking. Why?
FAQs:
Can I switch out a Phenolic Piston Caliper for a Steel Piston Caliper or vice versa?
FAQs:
Brakes squeal all of the time. What's causing the squeal?
FAQs:
Brake squeal can be caused by improper installation of the brake pads, improperly installed brake hardware and improper brake rotor finish.
FAQs:
As a rule, always use brake fluid recommended by O.E. The fluid type is stamped on the master cylinder reservoir lid. Always use new fluid in a sealed container.
FAQs:
A symptom of a low brake pedal is usually caused by air in the system, misadjusted rear brake shoes, deteriorated brake hose(s) or a defective master cylinder.
Life Cycle Status:
Available to Order
FAQs:
A silicone grease is used on floating caliper mounting pins.
Life Cycle Status Description:
Available to Order - Part is released to customers for ordering.
Features and Benefits:
Rubber seals are replaced with new high temperature EPDM rubber for extended life and optimum performance.
Item Level GTIN:
00082617011235
Features and Benefits:
Pistons are durable, resistant to cracking or pitting and handle great loads.
Quantity Per Application:
1
Features and Benefits:
Our remanufacturing process is earth-friendly, as it reduces the energy and raw material needed to make a new part by 80%.
Features and Benefits:
New washers are included where applicable for a proper seal.
Features and Benefits:
New stainless steel hardware clips and new mounting pins are included where applicable.
Features and Benefits:
New bleeder screws provide trouble-free bleeding and a positive seal.
Features and Benefits:
New banjo bolts are included where applicable to ensure a perfect fit and quick installation.
Features and Benefits:
Mounting bracket is included where applicable for a hassle-free installation.
Features and Benefits:
Calipers are treated with a special formulated rust inhibitor and kept in the original equipment finish.
Features and Benefits:
As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit.
Features and Benefits:
A plastic cap plug protects every brake port thread to ensure trouble-free installation.
Caliper Color:
Gray
Piston Quantity:
1
Piston Material:
Steel
Brake Caliper Finish:
Oil Emulsion
Pads Included:
No
Mounting Bolts Included:
No
Piston Size (OD) (mm):
85.55
Piston Size (OD) (in):
3.37
Mounting Type:
0.44
Bleeder Port Size:
3/8x24
Short Description:
Caliper
Country of Origin:
United States
Weight - Each (Gross Pounds):
17.4800
Height - Each (Inch):
5.2500
Length - Each (Inch):
9.5630
Width - Each (Inch):
7.2500



Need help? We're available at1-321-400-8080 - Email us atinfo@partsonnet.net orlive help
to top