Cardone 18-P4678 | Disc Brake Caliper
CARDONE Ultra(TM) Premium Calipers feature an exclusive, silver weather-proof coating that protects against rust and corrosion. Since 2002, over 70% of new vehicles have come with premium, open-spoke wheels, so high-end appearance and performance are important to today's car owner. CARDONE Ultra(TM) Premium Calipers deliver both, as they are backed by over 45 years of remanufacturing expertise. With all the installation hardware provided in the box, including banjo bolt and mounting bracket, these calipers are a snap to install. Between the premium appearance, reliable performance and easy installation, CARDONE Ultra(TM) Premium Calipers truly go above and beyond the average brake caliper.
BRAND: Cardone Ultra
FEATURES:
- Caliper, Brake Caliper, Disc Brake Caliper, Unloaded Caliper, Unloaded Brake Caliper, Power Brake Caliper, Hydraulic Disc Brake Caliper, Brakes
- Ford Expedition 2002-97, F-150 2003-97, F-150 Heritage 2004, F-250 2007-97, Lobo 2004-99; Lincoln Blackwood 2003-02, Navigator 2002-98, Town Car 2011-03
- Premium Unloaded Caliper
- Reman. Premium Unloaded Caliper
- Remanufactured Premium Unloaded Caliper
SPECIFICS:
Bleeder Port Size | 3/8x24 |
Brake Caliper Finish | Powder Coated |
Caliper Color | Silver |
E-Waste | No |
FAQs | Could calipers be the cause of a low brake pedal? |
FAQs | Inspect both calipers for binding or sticky slides or pins. Also ensure that brake hoses are not collapsed or restricted and inspect steering/suspension components for proper operation. |
FAQs | As a rule, always use brake fluid recommended by O.E. The fluid type is stamped on the master cylinder reservoir lid. Always use new fluid in a sealed container. |
FAQs | New hardware is included with all of our Calipers however the mounting bracket is an added option depending on part number and application. Mounting Brackets are also sold separately for most applications. |
FAQs | A silicone grease is used on floating caliper mounting pins. |
FAQs | What type of fluid should I use: DOT 3, DOT 4, or DOT 5? |
FAQs | Do all of your Calipers come with the new hardware and a mounting bracket for installation? |
FAQs | Car pulls to one side during braking. Why? |
FAQs | Not recommended. The O.E. manufacturers specified steel or phenolic pistons based on the intended use of the vehicle. It is recommended that the installer follow the manufacturers recommendations. |
FAQs | Brake squeal can be caused by improper installation of the brake pads, improperly installed brake hardware and improper brake rotor finish. |
FAQs | Can I switch out a Phenolic Piston Caliper for a Steel Piston Caliper or vice versa? |
FAQs | What type of grease is used on floating caliper mounting pins? |
FAQs | A symptom of a low brake pedal is usually caused by air in the system, misadjusted rear brake shoes, deteriorated brake hose(s) or a defective master cylinder. |
FAQs | Brakes squeal all of the time. What's causing the squeal? |
Features and Benefits | Our remanufacturing process is earth-friendly, as it reduces the energy and raw material needed to make a new part by 80%. |
Features and Benefits | An exclusive silver weather-proof coating that stops rust from forming, maintaining a showroom appearance. |
Features and Benefits | New bleeder screws provide trouble-free bleeding and a positive seal. |
Features and Benefits | New washers are included where applicable for a proper seal. |
Features and Benefits | As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit. |
Features and Benefits | A plastic cap plug protects every brake port thread to ensure a trouble free installation. |
Features and Benefits | Mounting bracket is included where applicable for a hassle-free installation. |
Features and Benefits | New banjo bolts are included where applicable to ensure a perfect fit and quick installation. |
Features and Benefits | Rubber seals are replaced with new high temperature EPDM rubber for extended life and optimum performance. |
Features and Benefits | Pistons are durable, resistant to cracking or pitting and handle great loads. |
Inlet Port Size | 3/8x24 |
Installation Hardware Included | Yes |
Mounting Bolts Included | No |
Package Contents | Caliper; Hardware Kit |
Pads Included | No |
Piston Material | Phenolic |
Piston Quantity | 1 |
Product Condition | Remanufactured |
INTERCHANGE:
- Lincoln: F75Z2553BA
- Ford: F75Z2553BA
- Ford: F75Z2553AE
APPLICATIONS:
- 2002-2003 Lincoln Blackwood - Position: Rear Right
- 1997-2002 Ford Expedition - Position: Rear Left
- 2003-2010 Lincoln Town Car - Position: Rear Left
- 2004-2004 Ford F-150 Heritage - Position: Rear Left
- 2004-2004 Ford F-150 Heritage - Position: Rear Right
- 1997-1999 Ford F-250 - Position: Rear Right
- 2003-2010 Lincoln Town Car - Position: Rear Right
- 1997-2007 Ford F-250 - Position: Rear Left
- 1998-2002 Lincoln Navigator - Position: Rear Right
- 2002-2003 Lincoln Blackwood - Position: Rear Left
- 1999-2004 Ford Lobo - Position: Rear Right
- 1999-2003 Ford F-150 - Position: Rear Left
- 1997-2003 Ford F-150 - Position: Rear Right
- 1997-2002 Ford Expedition - Position: Rear Right
- 1999-2004 Ford Lobo - Position: Rear Left
- 1998-2002 Lincoln Navigator - Position: Rear Left