×
close
click to zoom in

Cardone 18-P4842 | Disc Brake Caliper

(No reviews yet) Write a Review
$107.09
Part Number
CAD18-P4842
UPC:
8.84548E+11
Condition:
New
5 customers are viewing this product

CARDONE Ultra(TM) Premium Calipers feature an exclusive, silver weather-proof coating that protects against rust and corrosion. Since 2002, over 70% of new vehicles have come with premium, open-spoke wheels, so high-end appearance and performance are important to today's car owner. CARDONE Ultra(TM) Premium Calipers deliver both, as they are backed by over 45 years of remanufacturing expertise. With all the installation hardware provided in the box, including banjo bolt and mounting bracket, these calipers are a snap to install. Between the premium appearance, reliable performance and easy installation, CARDONE Ultra(TM) Premium Calipers truly go “above and beyond” the average brake caliper.

BRAND: Cardone Ultra

FEATURES:

  • Caliper, Brake Caliper, Disc Brake Caliper, Unloaded Caliper, Unloaded Brake Caliper, Power Brake Caliper, Hydraulic Disc Brake Caliper, Brakes
  • Chevrolet B60 1991-83, B7 2002-93, C50 1990, C5500 Kodiak 1991-90, C60 1990-83, C60 Kodiak 1996-90, C6500 Kodiak 2002-97, C70 1990-83, C70 Kodiak 1996-90, C7500 Kodiak 2002-97, P40 1990-88, P60 1996-92 1990-83, P6000 1996-92, T6500 2002-97, T7500 2002-97;
  • Premium Unloaded Caliper
  • Reman. Premium Unloaded Caliper
  • Remanufactured Premium Unloaded Caliper

SPECIFICS:

Bleeder Port Size7/16x24
Brake Caliper FinishPowder Coated
Caliper ColorSilver
E-WasteNo
FAQsBrake squeal can be caused by improper installation of the brake pads, improperly installed brake hardware and improper brake rotor finish.
FAQsInspect both calipers for binding or sticky slides or pins. Also ensure that brake hoses are not collapsed or restricted and inspect steering/suspension components for proper operation.
FAQsNot recommended. The O.E. manufacturers specified steel or phenolic pistons based on the intended use of the vehicle. It is recommended that the installer follow the manufacturer’s recommendations.
FAQsA symptom of a low brake pedal is usually caused by air in the system, misadjusted rear brake shoes, deteriorated brake hose(s) or a defective master cylinder.
FAQsCar pulls to one side during braking. Why?
FAQsCould calipers be the cause of a low brake pedal?
FAQsAs a rule, always use brake fluid recommended by O.E. The fluid type is stamped on the master cylinder reservoir lid. Always use new fluid in a sealed container.
FAQsNew hardware is included with all of our Calipers however the mounting bracket is an added option depending on part number and application. Mounting Brackets are also sold separately for most applications.
FAQsWhat type of grease is used on floating caliper mounting pins?
FAQsA silicone grease is used on floating caliper mounting pins.
FAQsBrakes squeal all of the time. What's causing the squeal?
FAQsWhat type of fluid should I use: DOT 3, DOT 4, or DOT 5?
FAQsCan I switch out a Phenolic Piston Caliper for a Steel Piston Caliper or vice versa?
FAQsDo all of your Calipers come with the new hardware and a mounting bracket for installation?
Features and BenefitsMounting bracket is included where applicable for a hassle-free installation.
Features and BenefitsNew washers are included where applicable for a proper seal.
Features and BenefitsAs a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit.
Features and BenefitsA plastic cap plug protects every brake port thread to ensure a trouble free installation.
Features and BenefitsNew banjo bolts are included where applicable to ensure a perfect fit and quick installation.
Features and BenefitsAn exclusive silver weather-proof coating that stops rust from forming, maintaining a showroom appearance.
Features and BenefitsNew bleeder screws provide trouble-free bleeding and a positive seal.
Features and BenefitsOur remanufacturing process is earth-friendly, as it reduces the energy and raw material needed to make a new part by 80%.
Features and BenefitsPistons are durable, resistant to cracking or pitting and handle great loads.
Features and BenefitsRubber seals are replaced with new high temperature EPDM rubber for extended life and optimum performance.
Inlet Port Size7/16x24
Installation Hardware IncludedYes
Mounting Bolts IncludedNo
Package ContentsCaliper; Hardware Kit
Pads IncludedNo
Piston MaterialSteel
Piston Quantity2
Product ConditionRemanufactured

WARRANTY TIME: 120 Months

INTERCHANGE:

  • Chevrolet: 15501146
  • Chevrolet: 15581552
  • Chevrolet: 15509974
  • Isuzu: 8156190990
  • Chevrolet: 8156190990
  • Chevrolet: 15574500
  • Chevrolet: 15510024
  • Chevrolet: 15622036
  • Chevrolet: 15550928
  • Chevrolet: 15619099
  • Chevrolet: 15152071

APPLICATIONS:

  • 1997-2002 Chevrolet C6500 Kodiak - Position: Front Left
  • 1988-1990 Chevrolet P40 - Position: Rear Left
  • 1992-1996 GMC P6500 - Position: Rear Left
  • 1990-1996 GMC C6000 Topkick - Position: Front Right
  • 1997-2005 Freightliner MT35 - Position: Rear Right
  • 1997-2002 GMC T7500 - Position: Rear Left
  • 1992-1996 GMC P6500 - Position: Front Right
  • 1993-2002 GMC B7 - Position: Front Right
  • 1990-1990 Chevrolet C50 - Position: Front Right
  • 1997-2002 GMC T6500 - Position: Front Left
  • 1983-1990 Chevrolet C70 - Position: Front Left
  • 1992-1996 GMC P6500 - Position: Front Left
  • 1997-2002 Chevrolet C7500 Kodiak - Position: Front Left
  • 1988-1990 GMC P4500 - Position: Front Left
  • 1999-2005 Freightliner MT55 - Position: Rear Right
  • 1997-2002 GMC T6500 - Position: Front Right
  • 1990-1991 Chevrolet C5500 Kodiak - Position: Rear Right
  • 1990-1996 GMC C6000 Topkick - Position: Rear Left
  • 1983-1991 Chevrolet B60 - Position: Rear Left
  • 1993-2002 Chevrolet B7 - Position: Rear Left
  • 1997-2002 Chevrolet T7500 - Position: Front Left
  • 1997-2002 GMC C6500 Topkick - Position: Front Left
  • 1988-1990 Chevrolet P40 - Position: Front Right
  • 1991-1991 GMC C5000 Topkick - Position: Front Right
  • 1997-2002 Isuzu FSR - Position: Rear Left
  • 1990-1996 GMC C6000 Topkick - Position: Rear Right
  • 1997-2002 Chevrolet T6500 - Position: Rear Left
  • 1988-1990 GMC P4500 - Position: Rear Left
  • 1992-1996 Chevrolet P60 - Position: Rear Right
  • 1990-1991 Chevrolet C5500 Kodiak - Position: Front Left
  • 1997-2002 GMC T7500 - Position: Front Right
  • 1997-2002 Isuzu FSR - Position: Front Right
  • 1998-2005 Freightliner MT45 - Position: Front Right
  • 1989-1991 GMC B6000 - Position: Rear Left
  • 1990-1996 GMC C6000 Topkick - Position: Front Left
  • 1997-2002 Isuzu FTR - Position: Rear Left
  • 1992-1996 Chevrolet P60 - Position: Front Left
  • 1997-2002 GMC C6500 Topkick - Position: Rear Right
  • 1997-2005 Freightliner MT35 - Position: Front Left
  • 1990-1996 Chevrolet C70 Kodiak - Position: Front Left
  • 1997-2002 Chevrolet C7500 Kodiak - Position: Rear Left
  • 1997-2002 GMC T7500 - Position: Rear Right
  • 1990-1996 Chevrolet C60 Kodiak - Position: Rear Right
  • 1988-1990 GMC P4500 - Position: Rear Right
  • 1983-1990 Chevrolet C70 - Position: Rear Right
  • 1998-2005 Freightliner MT45 - Position: Rear Right
  • 1997-2002 Isuzu FVR - Position: Rear Right
  • 1997-2002 Isuzu FTR - Position: Front Right
  • 1983-1990 GMC C6000 - Position: Rear Right
  • 1988-1990 Chevrolet P40 - Position: Rear Right
  • 1983-1990 GMC C6000 - Position: Rear Left
  • 1983-1990 GMC C7000 - Position: Front Right
  • 1991-1991 GMC C5000 Topkick - Position: Front Left
  • 1999-2005 Freightliner MT55 - Position: Front Left
  • 1993-2002 GMC B7 - Position: Rear Left
  • 1983-1990 GMC C7000 - Position: Front Left
  • 1997-2002 GMC T6500 - Position: Rear Left
  • 1997-2005 Freightliner MT35 - Position: Rear Left
  • 1983-1990 Chevrolet C70 - Position: Rear Left
  • 1997-2005 Freightliner MT35 - Position: Front Right
  • 1983-1991 Chevrolet B60 - Position: Front Right
  • 1997-2002 Isuzu FVR - Position: Rear Left
  • 1983-1990 Chevrolet C60 - Position: Front Left
  • 1983-1991 Chevrolet B60 - Position: Front Left
  • 1997-2002 Isuzu FSR - Position: Rear Right
  • 1998-2005 Freightliner MT45 - Position: Rear Left
  • 1990-1996 Chevrolet C60 Kodiak - Position: Rear Left
  • 1990-1990 Chevrolet C50 - Position: Rear Left
  • 1997-2002 GMC C7500 Topkick - Position: Front Right
  • 1990-1996 GMC C7000 Topkick - Position: Rear Left
  • 1990-1991 Chevrolet C5500 Kodiak - Position: Rear Left
  • 1997-2002 Chevrolet C7500 Kodiak - Position: Front Right
  • 1997-2002 GMC T7500 - Position: Front Left
  • 1983-1990 Chevrolet P60 - Position: Front Right
  • 1992-1996 Chevrolet P6000 - Position: Front Right
  • 1997-2002 Chevrolet C6500 Kodiak - Position: Rear Left
  • 1997-2002 GMC C7500 Topkick - Position: Rear Left
  • 1992-1996 Chevrolet P6000 - Position: Front Left
  • 1983-1990 Chevrolet C60 - Position: Rear Right
  • 1997-2002 GMC C6500 Topkick - Position: Front Right
  • 1998-2005 Freightliner MT45 - Position: Front Left
  • 1997-2002 GMC C6500 Topkick - Position: Rear Left
  • 1997-2002 Isuzu FVR - Position: Front Right
  • 1997-2002 GMC T6500 - Position: Rear Right
  • 1990-1991 Chevrolet C5500 Kodiak - Position: Front Right
  • 1997-2002 GMC C7500 Topkick - Position: Front Left
  • 1990-1990 Chevrolet C50 - Position: Front Left
  • 1997-2002 Chevrolet C7500 Kodiak - Position: Rear Right
  • 1983-1990 Chevrolet P60 - Position: Rear Right
  • 1993-2002 GMC B7 - Position: Front Left
  • 1997-2002 Chevrolet C6500 Kodiak - Position: Front Right
  • 1997-2002 Chevrolet T7500 - Position: Front Right
  • 1983-1991 Chevrolet B60 - Position: Rear Right
  • 1990-1996 Chevrolet C70 Kodiak - Position: Rear Left
  • 1992-1996 Chevrolet P6000 - Position: Rear Left
  • 1992-1996 Chevrolet P60 - Position: Rear Left
  • 1988-1990 Chevrolet P40 - Position: Front Left
  • 1991-1991 GMC C5000 Topkick - Position: Rear Right
  • 1993-2002 Chevrolet B7 - Position: Front Right
  • 1997-2002 Chevrolet T6500 - Position: Front Right
  • 1990-1996 Chevrolet C70 Kodiak - Position: Front Right
  • 1990-1996 Chevrolet C60 Kodiak - Position: Front Left
  • 1991-1991 GMC C5000 Topkick - Position: Rear Left
  • 1990-1996 GMC C7000 Topkick - Position: Front Right
  • 1993-2002 Chevrolet B7 - Position: Rear Right
  • 1997-2002 Chevrolet T7500 - Position: Rear Right
  • 1990-1996 GMC C7000 Topkick - Position: Rear Right
  • 1989-1991 GMC B6000 - Position: Front Right
  • 1983-1990 GMC C6000 - Position: Front Left
  • 1992-1996 Chevrolet P60 - Position: Front Right
  • 1997-2002 Chevrolet C6500 Kodiak - Position: Rear Right
  • 1988-1990 GMC P4500 - Position: Front Right
  • 1990-1996 Chevrolet C70 Kodiak - Position: Rear Right
  • 1997-2002 Isuzu FVR - Position: Front Left
  • 1990-1996 GMC C7000 Topkick - Position: Front Left
  • 1992-1996 Chevrolet P6000 - Position: Rear Right
  • 1983-1990 Chevrolet C70 - Position: Front Right
  • 1983-1990 GMC C6000 - Position: Front Right
  • 1990-1996 Chevrolet C60 Kodiak - Position: Front Right
  • 1999-2005 Freightliner MT55 - Position: Front Right
  • 1999-2005 Freightliner MT55 - Position: Rear Left
  • 1983-1990 GMC C7000 - Position: Rear Left
  • 1992-1996 GMC P6500 - Position: Rear Right
  • 1983-1990 Chevrolet P60 - Position: Rear Left
  • 1989-1991 GMC B6000 - Position: Front Left
  • 1993-2002 GMC B7 - Position: Rear Right
  • 1997-2002 Chevrolet T6500 - Position: Front Left
  • 1997-2002 GMC C7500 Topkick - Position: Rear Right
  • 1990-1990 Chevrolet C50 - Position: Rear Right
  • 1997-2002 Isuzu FTR - Position: Rear Right
  • 1983-1990 GMC C7000 - Position: Rear Right
  • 1983-1990 Chevrolet P60 - Position: Front Left
  • 1993-2002 Chevrolet B7 - Position: Front Left
  • 1997-2002 Isuzu FSR - Position: Front Left
  • 1997-2002 Isuzu FTR - Position: Front Left
  • 1983-1990 Chevrolet C60 - Position: Rear Left
  • 1983-1990 Chevrolet C60 - Position: Front Right
  • 1997-2002 Chevrolet T6500 - Position: Rear Right
  • 1989-1991 GMC B6000 - Position: Rear Right
  • 1997-2002 Chevrolet T7500 - Position: Rear Left

Product type:
Aftermarket
Features and Benefits:
Expertly remanufactured to rigorous quality and performance standards, all CARDONE Brake Calipers are equipped with brand-new, premium components to guarantee exceptional longevity and reliability. These remanufactured brake calipers are 100% pressur
Brand Description:
Brake Caliper
Hazardous Material:
No
Minimum Order Quantity:
1
Package Contents:
Caliper; Instruction Sheet; Hardware Kit
Installation Hardware Included:
Yes
Product Condition:
Remanufactured
E-Waste:
No
FAQs:
What type of grease is used on floating caliper mounting pins?
FAQs:
What type of fluid should I use: DOT 3, DOT 4, or DOT 5?
FAQs:
Not recommended. The O.E. manufacturers specified steel or phenolic pistons based on the intended use of the vehicle. It is recommended that the installer follow the manufacturer’s recommendations.
FAQs:
New hardware is included with all of our Calipers however the mounting bracket is an added option depending on part number and application. Mounting Brackets are also sold separately for most applications.
FAQs:
Inspect both calipers for binding or sticky slides or pins. Also ensure that brake hoses are not collapsed or restricted and inspect steering/suspension components for proper operation.
FAQs:
Do all of your Calipers come with the new hardware and a mounting bracket for installation?
FAQs:
Could calipers be the cause of a low brake pedal?
FAQs:
Car pulls to one side during braking. Why?
FAQs:
Can I switch out a Phenolic Piston Caliper for a Steel Piston Caliper or vice versa?
FAQs:
Brakes squeal all of the time. What's causing the squeal?
FAQs:
Brake squeal can be caused by improper installation of the brake pads, improperly installed brake hardware and improper brake rotor finish.
FAQs:
As a rule, always use brake fluid recommended by O.E. The fluid type is stamped on the master cylinder reservoir lid. Always use new fluid in a sealed container.
FAQs:
A symptom of a low brake pedal is usually caused by air in the system, misadjusted rear brake shoes, deteriorated brake hose(s) or a defective master cylinder.
Life Cycle Status:
Available to Order
FAQs:
A silicone grease is used on floating caliper mounting pins.
Life Cycle Status Description:
Available to Order - Part is released to customers for ordering.
Features and Benefits:
Rubber seals are replaced with new high temperature EPDM rubber for extended life and optimum performance.
Item Level GTIN:
00884548167087
Features and Benefits:
Pistons are durable, resistant to cracking or pitting and handle great loads.
Quantity Per Application:
1
Features and Benefits:
Our remanufacturing process is earth-friendly, as it reduces the energy and raw material needed to make a new part by 80%.
Features and Benefits:
New washers are included where applicable for a proper seal.
Features and Benefits:
New stainless steel hardware clips and new mounting pins are included where applicable.
Features and Benefits:
New bleeder screws provide trouble-free bleeding and a positive seal.
Features and Benefits:
New banjo bolts are included where applicable to ensure a perfect fit and quick installation.
Features and Benefits:
Mounting bracket is included where applicable for a hassle-free installation.
Features and Benefits:
Calipers are treated with a special formulated rust inhibitor and kept in the original equipment finish.
Features and Benefits:
As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit.
Features and Benefits:
A plastic cap plug protects every brake port thread to ensure trouble-free installation.
Caliper Color:
Silver
Piston Quantity:
2
Piston Material:
Steel
Brake Caliper Finish:
Powder Coated
Pads Included:
No
Mounting Bolts Included:
No
Piston Size (OD) (in):
2.495
Mounting Type:
0.437
Short Description:
Caliper
Country of Origin:
United States
Weight - Each (Gross Pounds):
17.5000
Height - Each (Inch):
7.2500
Length - Each (Inch):
15.0000
Width - Each (Inch):
10.1250



Need help? We're available at1-321-400-8080 - Email us atinfo@partsonnet.net orlive help
to top