×
close
click to zoom in

Cardone 19-P1448 | Rear Right Disc Brake Caliper

(No reviews yet) Write a Review
$41.99
Part Number
CAD19-P1448
UPC:
884548165496
Condition:
New
5 customers are viewing this product

CARDONE Ultra(TM) Premium Calipers feature an exclusive, silver weather-proof coating that protects against rust and corrosion. Since 2002, over 70% of new vehicles have come with premium, open-spoke wheels, so high-end appearance and performance are important to today's car owner. CARDONE Ultra(TM) Premium Calipers deliver both, as they are backed by over 45 years of remanufacturing expertise. With all the installation hardware provided in the box, including banjo bolt and mounting bracket, these calipers are a snap to install. Between the premium appearance, reliable performance and easy installation, CARDONE Ultra(TM) Premium Calipers truly go “above and beyond” the average brake caliper.

BRAND: Cardone Ultra

FEATURES:

  • Acura Legend 1995-91, RL 1998-96; Honda CR-V 2004-02, Odyssey 1998-95; Isuzu Oasis 1999-96
  • Caliper, Brake Caliper, Disc Brake Caliper, Unloaded Caliper, Unloaded Brake Caliper, Power Brake Caliper, Hydraulic Disc Brake Caliper, Brakes
  • Premium Unloaded Caliper
  • Reman. Premium Unloaded Caliper
  • Remanufactured Premium Unloaded Caliper

SPECIFICS:

Bleeder Port SizeM10X1.25
Brake Caliper FinishPowder Coated
Caliper ColorSilver
E-WasteNo
FAQsBrakes squeal all of the time. What's causing the squeal?
FAQsCan I switch out a Phenolic Piston Caliper for a Steel Piston Caliper or vice versa?
FAQsNew hardware is included with all of our Calipers however the mounting bracket is an added option depending on part number and application. Mounting Brackets are also sold separately for most applications.
FAQsCould calipers be the cause of a low brake pedal?
FAQsBrake squeal can be caused by improper installation of the brake pads, improperly installed brake hardware and improper brake rotor finish.
FAQsAs a rule, always use brake fluid recommended by O.E. The fluid type is stamped on the master cylinder reservoir lid. Always use new fluid in a sealed container.
FAQsA symptom of a low brake pedal is usually caused by air in the system, misadjusted rear brake shoes, deteriorated brake hose(s) or a defective master cylinder.
FAQsNot recommended. The O.E. manufacturers specified steel or phenolic pistons based on the intended use of the vehicle. It is recommended that the installer follow the manufacturer’s recommendations.
FAQsA silicone grease is used on floating caliper mounting pins.
FAQsWhat type of grease is used on floating caliper mounting pins?
FAQsCar pulls to one side during braking. Why?
FAQsWhat type of fluid should I use: DOT 3, DOT 4, or DOT 5?
FAQsDo all of your Calipers come with the new hardware and a mounting bracket for installation?
FAQsInspect both calipers for binding or sticky slides or pins. Also ensure that brake hoses are not collapsed or restricted and inspect steering/suspension components for proper operation.
Features and BenefitsAs a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit.
Features and BenefitsNew banjo bolts are included where applicable to ensure a perfect fit and quick installation.
Features and BenefitsOur remanufacturing process is earth-friendly, as it reduces the energy and raw material needed to make a new part by 80%.
Features and BenefitsA plastic cap plug protects every brake port thread to ensure a trouble free installation.
Features and BenefitsPistons are durable, resistant to cracking or pitting and handle great loads.
Features and BenefitsNew washers are included where applicable for a proper seal.
Features and BenefitsAn exclusive silver weather-proof coating that stops rust from forming, maintaining a showroom appearance.
Features and BenefitsRubber seals are replaced with new high temperature EPDM rubber for extended life and optimum performance.
Features and BenefitsNew bleeder screws provide trouble-free bleeding and a positive seal.
Features and BenefitsMounting bracket is included where applicable for a hassle-free installation.
Inlet Port SizeM10X1.0
Installation Hardware IncludedYes
Mounting Bolts IncludedNo
Package ContentsCaliper; Bracket; Hardware Kit
Pads IncludedNo
Piston MaterialSteel
Piston Quantity1
Product ConditionRemanufactured

WARRANTY TIME: 120 Months

INTERCHANGE:

  • Acura: 43210SP0003
  • Honda: 43018SX0000

APPLICATIONS:

  • 1996-1998 Acura RL - Position: Rear Right
  • 1991-1995 Acura Legend - Position: Rear Right
  • 1995-1998 Honda Odyssey - Position: Rear Right
  • 2002-2004 Honda CR-V - Position: Rear Right
  • 1996-1999 Isuzu Oasis - Position: Rear Right

Product type:
Aftermarket
Features and Benefits:
Expertly remanufactured to rigorous quality and performance standards, all CARDONE Brake Calipers are equipped with brand-new, premium components to guarantee exceptional longevity and reliability. These remanufactured brake calipers are 100% pressur
Brand Description:
Brake Caliper
Hazardous Material:
No
Minimum Order Quantity:
1
Package Contents:
Caliper; Instruction Sheet; Bracket; Hardware Kit
Installation Hardware Included:
Yes
Product Condition:
Remanufactured
E-Waste:
No
FAQs:
Inspect both calipers for binding or sticky slides or pins. Also ensure that brake hoses are not collapsed or restricted and inspect steering/suspension components for proper operation.
FAQs:
Do all of your Calipers come with the new hardware and a mounting bracket for installation?
FAQs:
Could calipers be the cause of a low brake pedal?
FAQs:
Car pulls to one side during braking. Why?
FAQs:
Can I switch out a Phenolic Piston Caliper for a Steel Piston Caliper or vice versa?
FAQs:
Brakes squeal all of the time. What's causing the squeal?
FAQs:
Brake squeal can be caused by improper installation of the brake pads, improperly installed brake hardware and improper brake rotor finish.
FAQs:
As a rule, always use brake fluid recommended by O.E. The fluid type is stamped on the master cylinder reservoir lid. Always use new fluid in a sealed container.
FAQs:
A symptom of a low brake pedal is usually caused by air in the system, misadjusted rear brake shoes, deteriorated brake hose(s) or a defective master cylinder.
FAQs:
A silicone grease is used on floating caliper mounting pins.
FAQs:
What type of grease is used on floating caliper mounting pins?
FAQs:
What type of fluid should I use: DOT 3, DOT 4, or DOT 5?
FAQs:
Not recommended. The O.E. manufacturers specified steel or phenolic pistons based on the intended use of the vehicle. It is recommended that the installer follow the manufacturer’s recommendations.
Life Cycle Status:
Available to Order
FAQs:
New hardware is included with all of our Calipers however the mounting bracket is an added option depending on part number and application. Mounting Brackets are also sold separately for most applications.
Life Cycle Status Description:
Available to Order - Part is released to customers for ordering.
Features and Benefits:
Rubber seals are replaced with new high temperature EPDM rubber for extended life and optimum performance.
Item Level GTIN:
00884548165496
Features and Benefits:
Pistons are durable, resistant to cracking or pitting and handle great loads.
Quantity Per Application:
1
Features and Benefits:
Our remanufacturing process is earth-friendly, as it reduces the energy and raw material needed to make a new part by 80%.
Features and Benefits:
New washers are included where applicable for a proper seal.
Features and Benefits:
New stainless steel hardware clips and new mounting pins are included where applicable.
Features and Benefits:
New bleeder screws provide trouble-free bleeding and a positive seal.
Features and Benefits:
New banjo bolts are included where applicable to ensure a perfect fit and quick installation.
Features and Benefits:
Mounting bracket is included where applicable for a hassle-free installation.
Features and Benefits:
Calipers are treated with a special formulated rust inhibitor and kept in the original equipment finish.
Features and Benefits:
As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit.
Features and Benefits:
A plastic cap plug protects every brake port thread to ensure trouble-free installation.
Caliper Color:
Silver
Piston Quantity:
1
Piston Material:
Steel
Brake Caliper Finish:
Powder Coated
Pads Included:
No
Mounting Bolts Included:
No
Piston Size (OD) (in):
1.5
Mounting Type:
0.398
Bleeder Port Size:
M10X1.25
Short Description:
Caliper
Country of Origin:
United States
Weight - Each (Gross Pounds):
5.8000
Height - Each (Inch):
5.2500
Length - Each (Inch):
7.8750
Width - Each (Inch):
6.1250



Need help? We're available at1-321-400-8080 - Email us atinfo@partsonnet.net orlive help
to top