×
close
click to zoom in

Cardone 20-7879 | Power Steering Pump

(No reviews yet) Write a Review
$72.99
Part Number
CAD20-7879
UPC:
82617024495
Condition:
New
5 customers are viewing this product

CARDONE Remanufactured Power Steering Pumps are engineered to meet or exceed O.E. performance. Original designs are scrutinized for potential improvement, and where applicable, design upgrades are implemented to produce a more durable part than the original. All critical components are tested to ensure proper function. Every unit undergoes a hydraulic efficiency test to ensure reliable, long-lasting performance.

BRAND: Cardone Reman

FEATURES:

  • American Motors AMX 1980-78, Concord 1983-78, Eagle 1988-80, Pacer 1980, Spirit 1983-79; Jeep Cherokee 1983-80, CJ5 1982-80, CJ7 1982-80, Grand Wagoneer 1991-84, J10 1988-80, J20 1988-80, Scrambler 1982-81, Wagoneer 1983-80
  • Power Steering Pump
  • Power Steering Pump, Steering Pump, Pump and Reservior
  • Reman. Power Steering Pump
  • Remanufactured Power Steering Pump

SPECIFICS:

E-WasteNo
FAQsThe problem is not in the pump, it is in the steering gear. The pump would cause a steering problem in both directions.
FAQsMost likely cause is contamination. Remove the pressure hose and pressure fitting on the power steering pump. Remove the flow control valve and spring. Clean the valve and check the valve bore for damage. Reinstall the spring, valve, fitting and hose. Flush and bleed system and re-test. If okay, install power steering filter to prevent problem from re-occurring.
FAQsShould I ever change my fluid, even though nothing is wrong?
FAQsI only have assist when increasing engine rpm after installing the replacement pump. What's causing this?
FAQsI bought a replacement power steering pump and my original pulley has a loose fit on the replacement pump shaft. What should I do?
FAQsWhy do I still have hard steering in one direction after I replaced the pump?
FAQsA whining pump is usually caused by air in the power steering system. Inspect the reservoir for proper fluid level. If fluid has foam or air bubbles present, air has entered the system or has not been properly bled (ensure all hoses/clamps are tight). Some systems require special vacuum bleeding procedures.
FAQsWhy is the pump making a whining noise all of the time?
FAQsThe end of the original pump's input shaft enlarged causing the pulley hole to increase during removal. The pulley must be replaced.
FAQsYes. Some O.E. manufacturers recommend that power steering fluid be changed at 50,000 miles and continue at that interval. Just like engine oil, power steering fluid will eventually break down and carry suspended contaminants from component wear and breakdown. Follow your vehicle's O.E. manufacturer's recommendations on fluid change intervals.
Features and BenefitsAs a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit.
Features and BenefitsFInal pump assembly is computer-tested to measure pressure, bypass, fluid flow, valve operation, steering effort and noise to ensure reliable performance.
Features and BenefitsAll units are built with 100% new O-rings and premium-grade HNBR seals to prevent leaks. HNBR does not break down at high temperatures like conventional seal material.
Features and BenefitsAll critical components (cam packs, spool valves, etc.) are triple-tested to ensure product reliability.
Features and BenefitsShafts are surfaced to precise specifications to eliminate premature seal wear and extend pump life.
Features and BenefitsUnits are supplied with 100% tested and calibrated pressure relief valves.
Features and BenefitsOur remanufacturing process is earth-friendly, as it reduces the energy and raw material needed to make a new part by 80%.
Hose Port TypeO-Ring
Housing MaterialCast Iron
Mounting Hardware IncludedNo
Package ContentsHydraulic Pump; Instruction Sheet; Sealing Kit
Power Steering Outlet ID Size0
Power Steering Outlet Thread Size16x1.5
Power Steering Pump Inlet Attachement TypeHose Barb
Power Steering Pump Outlet Attachment TypeThreaded
Power Steering Pump Outlet Quantity1
Power Steering Reservoir Cap IncludedNo
Product ConditionRemanufactured
Pulley Attachement TypePress-On
Pulley IncludedNo
Remote ReservoirNo
Reservoir IncludedYes

INTERCHANGE:

  • Jeep: 8953002714
  • Jeep: 3237193
  • Jeep: J3237193
  • Jeep: 53002714

APPLICATIONS:

  • 1980-1988 American Motors Eagle
  • 1980-1982 Jeep CJ5
  • 1981-1982 Jeep Scrambler
  • 1978-1980 American Motors AMX
  • 1980-1982 Jeep CJ7
  • 1980-1983 Jeep Cherokee
  • 1980-1983 Jeep Wagoneer
  • 1980-1988 Jeep J20
  • 1980-1980 American Motors Pacer
  • 1984-1991 Jeep Grand Wagoneer
  • 1980-1988 Jeep J10
  • 1978-1983 American Motors Concord
  • 1979-1983 American Motors Spirit

Product type:
Aftermarket
Features and Benefits:
CARDONE Remanufactured Power Steering Pumps are engineered to meet or exceed O.E. performance. Original designs are scrutinized for potential improvement, and where applicable, design upgrades are implemented to produce a more durable part than the o
Brand Description:
Power Steering Pump
Mounting Hardware Included:
No
Housing Material:
Cast Iron
Hazardous Material:
No
Minimum Order Quantity:
1
Reservoir Included:
No
Package Contents:
Hydraulic Pump; Instruction Sheet; Sealing Kit
Product Condition:
Remanufactured
E-Waste:
No
Pulley Included:
No
Power Steering Outlet Thread Size:
16x1.5
Hose Port Type:
O-Ring
Remote Reservoir:
No
FAQs:
Why do I still have hard steering in one direction after I replaced the pump?
FAQs:
There may be debris in the flow control valve bore not allowing the flow control valve to move as it should. (Valve and bore are located behind the high pressure fitting on the pump). The system must be checked for contamination and flushed.
FAQs:
The problem is not in the pump, it is in the steering gear. The pump would cause a steering problem in both directions.
FAQs:
The end of the original pump's input shaft enlarged causing the pulley hole to increase during removal. The pulley must be replaced.
FAQs:
Should I ever change my fluid, even though nothing is wrong?
FAQs:
I only have assist when increasing engine rpm after installing the replacement pump. What's causing this?
FAQs:
I bought a replacement power steering pump and my original pulley has a loose fit on the replacement pump shaft. What should I do?
Life Cycle Status:
Available to Order
FAQs:
Why is the pump making a whining noise all of the time?
Life Cycle Status Description:
Available to Order - Part is released to customers for ordering.
Features and Benefits:
Units are supplied with 100% tested and calibrated pressure relief valves.
Item Level GTIN:
00082617024495
Features and Benefits:
Shafts are surfaced to precise specifications to eliminate premature seal wear and extend pump life.
Quantity Per Application:
1
Features and Benefits:
Our remanufacturing process is earth-friendly, as it reduces the energy and raw material needed to make a new part by 80%.
Features and Benefits:
FInal pump assembly is computer-tested to measure pressure, bypass, fluid flow, valve operation, steering effort and noise to ensure reliable performance.
Features and Benefits:
As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit.
Features and Benefits:
All units are built with 100% new O-rings and premium-grade HNBR seals to prevent leaks. HNBR does not break down at high temperatures like conventional seal material.
Features and Benefits:
All critical components (cam packs, spool valves, etc.) are triple-tested to ensure product reliability.
Pulley Attachement Type:
Press-On
Power Steering Reservoir Cap Included:
No
Power Steering Pump Inlet Attachement Type:
Barb
Power Steering Pump Outlet Attachment Type:
Threaded
Power Steering Pump Outlet Quantity:
1
Short Description:
Pwr Steering Pump
Country of Origin:
Mexico
Weight - Each (Gross Pounds):
9.4600
Height - Each (Inch):
6.5000
Length - Each (Inch):
10.7500
Width - Each (Inch):
7.1250



Need help? We're available at1-321-400-8080 - Email us atinfo@partsonnet.net orlive help
to top