×
close

Cardone 20-8758 | Power Steering Pump

(No reviews yet) Write a Review
$67.99
Part Number
CAD20-8758
UPC:
82617580533
Condition:
New
5 customers are viewing this product

CARDONE Remanufactured Power Steering Pumps are engineered to meet or exceed O.E. performance. Original designs are scrutinized for potential improvement, and where applicable, design upgrades are implemented to produce a more durable part than the original. All critical components are tested to ensure proper function. Every unit undergoes a hydraulic efficiency test to ensure reliable, long-lasting performance.

BRAND: Cardone Reman

FEATURES:

  • Reman. Power Steering Pump
  • Chevrolet Avalanche 2500 2006-02, Silverado 2500 HD 2006-01, Silverado 2500 HD Classic 2007, Silverado 3500 2006-01, Silverado 3500 Classic 2007, Suburban 2500 2006-01; GMC Sierra 2500 HD 2006-01, Sierra 2500 HD Classic 2007, Sierra 3500 2006-01, Sierra 3500 Classic 2007, Yukon XL 2500 2006-01
  • Power Steering Pump
  • Remanufactured Power Steering Pump
  • Power Steering Pump
  • Power Steering Pump, Steering Pump, Pump and Reservior

SPECIFICS:

E-WasteNo
FAQsWhy do I still have hard steering in one direction after I replaced the pump?
FAQsI only have assist when increasing engine rpm after installing the replacement pump. What's causing this?
FAQsMost likely cause is contamination. Remove the pressure hose and pressure fitting on the power steering pump. Remove the flow control valve and spring. Clean the valve and check the valve bore for damage. Reinstall the spring, valve, fitting and hose. Flush and bleed system and re-test. If okay, install power steering filter to prevent problem from re-occurring.
FAQsThe problem is not in the pump, it is in the steering gear. The pump would cause a steering problem in both directions.
FAQsA whining pump is usually caused by air in the power steering system. Inspect the reservoir for proper fluid level. If fluid has foam or air bubbles present, air has entered the system or has not been properly bled (ensure all hoses/clamps are tight). Some systems require special vacuum bleeding procedures.
FAQsShould I ever change my fluid, even though nothing is wrong?
FAQsThe end of the original pump's input shaft enlarged causing the pulley hole to increase during removal. The pulley must be replaced.
FAQsWhy is the pump making a whining noise all of the time?
FAQsI bought a replacement power steering pump and my original pulley has a loose fit on the replacement pump shaft. What should I do?
FAQsYes. Some O.E. manufacturers recommend that power steering fluid be changed at 50,000 miles and continue at that interval. Just like engine oil, power steering fluid will eventually break down and carry suspended contaminants from component wear and breakdown. Follow your vehicle's O.E. manufacturer's recommendations on fluid change intervals.
Features and BenefitsOur remanufacturing process is earth-friendly, as it reduces the energy and raw material needed to make a new part by 80%.
Features and BenefitsAll critical components (cam packs, spool valves, etc.) are triple-tested to ensure product reliability.
Features and BenefitsAs a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit.
Features and BenefitsAll units are built with 100% new O-rings and premium-grade HNBR seals to prevent leaks. HNBR does not break down at high temperatures like conventional seal material.
Features and BenefitsFInal pump assembly is computer-tested to measure pressure, bypass, fluid flow, valve operation, steering effort and noise to ensure reliable performance.
Features and BenefitsShafts are surfaced to precise specifications to eliminate premature seal wear and extend pump life.
Features and BenefitsUnits are supplied with 100% tested and calibrated pressure relief valves.
Hose Port TypeO-Ring
Housing MaterialCast Iron
Mounting Hardware IncludedNo
Package ContentsPump, O-Ring (2), Reservoir, Instruction Sheet
Power Steering Outlet Thread SizeM16 x 1.5
Power Steering Pump Inlet Attachement TypeHose Barb
Power Steering Pump Outlet Attachment TypeThreaded
Power Steering Pump Outlet Quantity1
Power Steering Reservoir Cap IncludedNo
Product ConditionRemanufactured
Pulley Attachement TypePress-On
Pulley IncludedNo
Remote ReservoirYes
Reservoir IncludedYes

DOWNLOADS:

WARRANTY TIME: 36 Months

INTERCHANGE:

  • Chevrolet: 15909829
  • General Motors: 26087431
  • General Motors: 15267671
  • Chevrolet: 15134708
  • General Motors: 88963608
  • General Motors: 15754191

APPLICATIONS:

  • 2007-2007 Chevrolet Silverado 3500 Classic
  • 2007-2007 GMC Sierra 3500 Classic
  • 2001-2006 GMC Sierra 3500
  • 2001-2006 GMC Yukon XL 2500
  • 2007-2007 GMC Sierra 2500 HD Classic
  • 2007-2007 Chevrolet Silverado 2500 HD Classic
  • 2002-2006 Chevrolet Avalanche 2500
  • 2001-2006 Chevrolet Silverado 2500 HD
  • 2001-2006 Chevrolet Suburban 2500
  • 2001-2006 GMC Sierra 2500 HD
  • 2001-2006 Chevrolet Silverado 3500

Product type:
Aftermarket
Features and Benefits:
CARDONE Remanufactured Power Steering Pumps are engineered to meet or exceed O.E. performance. Original designs are scrutinized for potential improvement, and where applicable, design upgrades are implemented to produce a more durable part than the o
Brand Description:
Power Steering Pump
Mounting Hardware Included:
No
Housing Material:
Cast Iron
Hazardous Material:
No
Minimum Order Quantity:
1
Reservoir Included:
No
Package Contents:
Hydraulic Pump; Instruction Sheet; Sealing Kit
Product Condition:
Remanufactured
E-Waste:
No
Pulley Included:
No
Power Steering Outlet Thread Size:
16x1.5
Hose Port Type:
O-Ring
Remote Reservoir:
No
FAQs:
Should I ever change my fluid, even though nothing is wrong?
FAQs:
I only have assist when increasing engine rpm after installing the replacement pump. What's causing this?
FAQs:
I bought a replacement power steering pump and my original pulley has a loose fit on the replacement pump shaft. What should I do?
FAQs:
Why is the pump making a whining noise all of the time?
FAQs:
Why do I still have hard steering in one direction after I replaced the pump?
FAQs:
The pulley may have cracked upon removal. If the shaft was mushroomed before removing the pulley, it has now enlarged the bore in the pulley. The pulley must be replaced.
FAQs:
The problem is not in the pump, it is in the steering gear. The pump would cause a steering problem in both directions.
Life Cycle Status:
Available to Order
Features and Benefits:
Units are supplied with 100% tested and calibrated pressure relief valves.
Life Cycle Status Description:
Available to Order - Part is released to customers for ordering.
Features and Benefits:
Shafts are surfaced to precise specifications to eliminate premature seal wear and extend pump life.
Item Level GTIN:
00082617580533
Features and Benefits:
Our remanufacturing process is earth-friendly, as it reduces the energy and raw material needed to make a new part by 80%.
Quantity Per Application:
1
Features and Benefits:
FInal pump assembly is computer-tested to measure pressure, bypass, fluid flow, valve operation, steering effort and noise to ensure reliable performance.
Features and Benefits:
As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit.
Features and Benefits:
All units are built with 100% new O-rings and premium-grade HNBR seals to prevent leaks. HNBR does not break down at high temperatures like conventional seal material.
Features and Benefits:
All critical components (cam packs, spool valves, etc.) are triple-tested to ensure product reliability.
Pulley Attachement Type:
Press-On
Power Steering Reservoir Cap Included:
No
Power Steering Pump Inlet Attachement Type:
Barb
Power Steering Pump Outlet Attachment Type:
Threaded
Power Steering Pump Outlet Quantity:
1
Short Description:
Pwr Steering Pump
Country of Origin:
Mexico
Weight - Each (Gross Pounds):
9.5400
Height - Each (Inch):
6.5000
Length - Each (Inch):
10.7500
Width - Each (Inch):
7.1250



Need help? We're available at1-321-400-8080 - Email us atinfo@partsonnet.net orlive help
to top