×
close

Cardone 22-1016 | Rack and Pinion Assembly

(No reviews yet) Write a Review
$233.99
Part Number
CAD22-1016
UPC:
82617690904
Condition:
New
5 customers are viewing this product

Expertly remanufactured to rigorous quality and performance standards, CARDONE Electronic Power Steering Rack and Pinions are equipped with brand-new, premium components to guarantee exceptional longevity and reliability. Each unit undergoes CARDONE’s Factory Test Drive, simulating extreme operating conditions while verifying all on-car communications. All rubber sealing components are replaced, and a specialized lubricant is applied to drastically increase longevity.

BRAND: Cardone Reman

FEATURES:

  • Chevrolet Colorado 2006-04; GMC Canyon 2006-04; Isuzu i-280 2006, i-350 2006
  • Rack and Pinion Assembly
  • Rack and Pinion, Rack and Pinion Complete Unit, Complete Rack, Hydraulic Power Steering Rack, Steering Gear, Rack, Power Rack
  • Reman. Rack and Pinion Assembly
  • Remanufactured Rack and Pinion Assembly

SPECIFICS:

Casting MaterialSteel; Aluminum
Distance Between Mounting Holes (in)2.25
Distance Between Mounting Holes (mm)57.15
E-WasteNo
FAQsFor the first few minutes of driving my car, the steering is hard. Is the rack and pinion bad or the power steering pump?
FAQsThe rack and pinion does not return to center by itself. The geometry of the front suspension causes the wheels to return to center coming out of a turn. If the vehicle will not return to center, first, check the front end alignment, then, check for a restricted return line in the power steering system. If the return line is restricted or kinked, this could be blocking the flow of fluid back to the pump.
FAQsThis symptom is classified as "morning sickness". This condition is caused by Teflon sealing rings on the spool valve wearing grooves in the aluminum housing of the rack and pinion resulting in an internal bypass of pressure. Once the housing warms up, the metal will expand and reduce the pressure loss. The rack and pinion must be replaced.
FAQsSteering not returning to center coming out of a turn. What could be causing this?
FAQsI replaced the rack and now the power steering pump is whining. What happened? It never did this before!
FAQsThe most likely cause of power steering pump whine is air in the system. The Steering system must be bled completely.
Features and BenefitsApplication of specialized lubricant(s) for extended life.
Features and BenefitsEach unit undergoes a factory test drive, simulating extreme operating conditions while verifying all on-car communications.
Features and Benefits100% replacement of rubber sealing components.
Features and BenefitsValve housings have polished micro-finish sleeves for durability (where applicable).
Features and BenefitsFinished in protective coating to prevent corrosion and rust.
Features and BenefitsOur remanufacturing process is earth-friendly, as it reduces the energy and raw material needed to make a new part by 80%.
Features and BenefitsAll new spool valve seals and rack donut seals are installed to eliminate internal leaks and ensure reliable performance (where applicable).
Features and BenefitsAs a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit.
Hose Port TypeO-Ring
Input Shaft Diameter (in)0.79
Input Shaft Diameter (mm)19.96
Input Shaft Length (in)2.00
Input Shaft Length (mm)50.80
Number of Mounting Holes2
Package ContentsRack and Pinion, Rubber Bushing, Installation Kit, Instruction Sheet
Pressure Port ID Size0.472
Product ConditionRemanufactured
Rack Length (in)48.25
Rack Length (mm)1225.55
Return Port ID Size0.436
Steering Rack ColorBlack
Thread Length (in)2.08
Thread Length (mm)52.88
Tie Rod Ends IncludedYes
Total Turns Lock to Lock3.19

WARRANTY TIME: 36 Months

INTERCHANGE:

  • Isuzu: 8260954620
  • Isuzu: 26095462
  • GMC: 26095462
  • Chevrolet: 26095462
  • Chevrolet: 8260954620

APPLICATIONS:

  • 2006-2006 Isuzu i-280
  • 2004-2006 GMC Canyon
  • 2004-2006 Chevrolet Colorado
  • 2006-2006 Isuzu i-350

Product type:
Aftermarket
Features and Benefits:
Expertly remanufactured to rigorous quality and performance standards, CARDONE Electronic Power Steering Rack and Pinions are equipped with brand-new, premium components to guarantee exceptional longevity and reliability. Each unit undergoes CARDONE’
Brand Description:
Rack and Pinion Assembly
Grade Type:
Regular
Hazardous Material:
No
Minimum Order Quantity:
1
Package Contents:
Rack and Pinion; Mounting Bushing; Sealing Kit; Instruction Sheet
Installation Hardware Included:
Yes
Product Condition:
Remanufactured
E-Waste:
No
FAQs:
The most likely cause of power steering pump whine is air in the system. The Steering system must be bled completely.
FAQs:
Steering not returning to center coming out of a turn. What could be causing this?
FAQs:
I replaced the rack and now the power steering pump is whining. What happened? It never did this before!
FAQs:
For the first few minutes of driving my car, the steering is hard. Is the rack and pinion bad or the power steering pump?
Features and Benefits:
Finished in protective coating to prevent corrosion and rust.
Features and Benefits:
Each unit undergoes a factory test drive, simulating extreme operating conditions while verifying all on-car communications.
Features and Benefits:
As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit.
Features and Benefits:
Application of specialized lubricant(s) for extended life.
Features and Benefits:
100% replacement of rubber sealing components.
Rack Length (in):
48.13
Steering Rack Color/Finish:
Black
Tie Rod Ends Included:
Yes
Life Cycle Status:
Available to Order
Total Turns Lock to Lock:
3.25
Life Cycle Status Description:
Available to Order - Part is released to customers for ordering.
Rack Length (mm):
1222.38
Item Level GTIN:
00082617690904
Distance Between Mounting Holes (in):
2.25
Quantity Per Application:
1
Distance Between Mounting Holes (mm):
57.15
Input Shaft Diameter (in):
0.79
Input Shaft Diameter (mm):
19.96
Input Shaft Length (in):
2.00
Input Shaft Length (mm):
50.80
Casting Material:
Steel; Aluminum
Mounting Brackets Included:
No
Gasket or Seal Included:
Yes
Outer Tie Rods Included:
No
Bellows Color:
Black
Number of Mounting Holes:
2
Short Description:
Rack and Pinion
Warranty:
Hydraulic
Country of Origin:
Mexico
Weight - Each (Gross Pounds):
19.9600
Height - Each (Inch):
6.5000
Length - Each (Inch):
48.7500
Width - Each (Inch):
10.2500



Need help? We're available at1-321-400-8080 - Email us atinfo@partsonnet.net orlive help
to top