×
close
click to zoom in

Cardone 3P-25130 | Power Steering Pump Pulley

(No reviews yet) Write a Review
$30.59
Part Number
CAD3P-25130
UPC:
8.84548E+11
Condition:
New
5 customers are viewing this product

Power steering pulleys are an important component in the drive system for belt-driven steering pumps and should be replaced during any power steering pump service. CARDONE¨ New Power Steering Pulleys are manufactured using the most stringent quality processes to deliver smooth, consistent performance in any driving condition. As a direct-fit component, each pulley installs easily, saving precious labor time while providing peace of mind. In an industry where time is such a valuable commodity, CARDONE strives to help make sure your time is spent wisely.

BRAND: Cardone New

FEATURES:

  • New Power Steering Pump Pulley
  • Power Steering Pump Pulley
  • New Power Steering Pump Pulley
  • Ford Five Hundred 2007-05, Freestyle 2007-05, Sable 2001-96, Taurus 2005-96; Mercury Montego 2007-05, Sable 2005-96
  • Pulley, Power Steering Pump Pulley, PS Pulley, Steering Pulley
  • Power Steering Pump Pulley

SPECIFICS:

Belt TypeSerpentine
ColorBlack
E-WasteNo
FAQsDo you powder coat your pulleys?
FAQsPulleys are typically made of plastic composite nylon or steel.
FAQsThe replacement pulley should be pressed to the point where the hub is flush with the end of the shaft.
FAQsPulleys are painted with weather resistant epoxy paint.
FAQsWhat type of material are pulleys made of?
FAQsAre there any special tools needed to remove and install the pulley?
FAQsFlat, V-belt, and Multi groove
FAQsHow can I check to see if the replacement pulley is aligned with the adjacent accessory pulleys?
FAQsHow important is belt condition and tension?
FAQsThe age and continual flexing of a belt will cause it to crack and deteriorate. Stretching loosens the belt, causing it to slip on the pulleys. A cracked belt will eventually break. The tension and general condition of the belt should be checked periodically.
FAQsWhat are the different types of pulley designs?
FAQsYes, use of the correct tool based on engine application and pulley type is necessary to prevent damage to the pulley.
FAQsAccessory pulley alignment should be checked using a straightedge if a pulley alignment issue is suspected. The straightedge should lie flat across the fascia of two adjacent pulleys. If the straightedge does not lie flat, then one of the pulleys is misaligned. To validate which of the pulleys is causing the issue, check each against other pulleys until you isolate the one that is out of line. Pulley alignment can also be checked with a laser alignment tool.
FAQsHow far should the replacement pulley be pressed on the shaft for correct alignment with the other accessory pulleys?
Features and BenefitsTested to meet same performance as O.E.
Features and BenefitsPulley front fascia designed with O.E. cutouts for ease of pump removal or installation, where applicable.
Features and BenefitsSimple installation with correct tools
Features and BenefitsDirect replacement of original pulley
Features and BenefitsSame grade material and gauge as O.E. for strength and durability
Groove Quantity5
Item GradeStandard Replacement
Mount TypePress-Fit
Mounting Hardware IncludedNo
Mounting Hole Quantity1
Outside Diameter (in)5.314
Package ContentsPulley
Product ConditionNew
Shaft Diameter (mm)16.00
Width (Belt) (mm)130.00

DOWNLOADS:

INTERCHANGE:

  • Ford: F6DZ3A733A
  • Ford: 5F9Z3A733AA
  • Mercury: F6DZ3A733A
  • Mercury: 5F9Z3A733AA

APPLICATIONS:

  • 1996-2005 Mercury Sable
  • 1996-2001 Ford Sable
  • 2005-2007 Ford Five Hundred
  • 2005-2007 Mercury Montego
  • 1996-2005 Ford Taurus
  • 2005-2007 Ford Freestyle

Product type:
Aftermarket
Features and Benefits:
Power steering pulleys are an important component in the drive system for belt-driven steering pumps and should be replaced during any power steering pump service. CARDONE New Power Steering Pulleys are manufactured using the most stringent quality p
Brand Description:
Power Steering Pump Pulley
Mounting Hardware Included:
No
Color:
Black
Hazardous Material:
No
Minimum Order Quantity:
1
Package Contents:
Pulley
Product Condition:
New
Mounting Hole Quantity:
1
E-Waste:
No
Item Grade:
Standard Replacement
FAQs:
The replacement pulley should be pressed to the point where the hub is flush with the end of the shaft.
FAQs:
Pulleys are typically made of plastic composite nylon or steel.
FAQs:
Pulleys are painted with weather resistant epoxy paint.
FAQs:
How important is belt condition and tension?
FAQs:
How far should the replacement pulley be pressed on the shaft for correct alignment with the other accessory pulleys?
FAQs:
How can I check to see if the replacement pulley is aligned with the adjacent accessory pulleys?
FAQs:
Flat, V-belt, and Multi groove
FAQs:
Do you powder coat your pulleys?
FAQs:
Are there any special tools needed to remove and install the pulley?
FAQs:
Yes, use of the correct tool based on engine application and pulley type is necessary to prevent damage to the pulley.
Life Cycle Status:
Available to Order
FAQs:
What type of material are pulleys made of?
Life Cycle Status Description:
Available to Order - Part is released to customers for ordering.
FAQs:
What are the different types of pulley designs?
Item Level GTIN:
00884548229174
Features and Benefits:
Same grade material and gauge as O.E. for strength and durability
Quantity Per Application:
1
Features and Benefits:
Pulley front fascia designed with O.E. cutouts for ease of pump removal or installation, where applicable.
Features and Benefits:
Direct replacement of original pulley
Fuel Type:
Serpentine
Electrical:
5
Filter Included:
Press-Fit
Outside Diameter (in):
5.31
Shaft Diameter (mm):
16.00
Width (Belt) (mm):
130.00
Short Description:
PS Pump Pulley
Country of Origin:
China
Weight - Each (Gross Pounds):
2.0000
Height - Each (Inch):
2.2500
Length - Each (Inch):
10.2500
Width - Each (Inch):
6.5000



Need help? We're available at1-321-400-8080 - Email us atinfo@partsonnet.net orlive help
to top