×
close
click to zoom in

Cardone 3P-53109 | Power Steering Pump Pulley

(No reviews yet) Write a Review
$45.89
Part Number
CAD3P-53109
UPC:
8.84548E+11
Condition:
New
5 customers are viewing this product

Power steering pulleys are an important component in the drive system for belt-driven steering pumps and should be replaced during any power steering pump service. CARDONE¨ New Power Steering Pulleys are manufactured using the most stringent quality processes to deliver smooth, consistent performance in any driving condition. As a direct-fit component, each pulley installs easily, saving precious labor time while providing peace of mind. In an industry where time is such a valuable commodity, CARDONE strives to help make sure your time is spent wisely.

BRAND: Cardone New

FEATURES:

  • Power Steering Pump Pulley
  • Lexus ES300 2001-97; Toyota Avalon 2004-95, Camry 2003-95, Highlander 2001, Sienna 2003-98, Solara 2003-99
  • New Power Steering Pump Pulley
  • Pulley, Power Steering Pump Pulley, PS Pulley, Steering Pulley
  • Power Steering Pump Pulley
  • New Power Steering Pump Pulley

SPECIFICS:

Belt TypeSerpentine
ColorBlack
E-WasteNo
FAQsDo you powder coat your pulleys?
FAQsHow far should the replacement pulley be pressed on the shaft for correct alignment with the other accessory pulleys?
FAQsPulleys are typically made of plastic composite nylon or steel.
FAQsThe replacement pulley should be pressed to the point where the hub is flush with the end of the shaft.
FAQsYes, use of the correct tool based on engine application and pulley type is necessary to prevent damage to the pulley.
FAQsPulleys are painted with weather resistant epoxy paint.
FAQsThe age and continual flexing of a belt will cause it to crack and deteriorate. Stretching loosens the belt, causing it to slip on the pulleys. A cracked belt will eventually break. The tension and general condition of the belt should be checked periodically.
FAQsWhat are the different types of pulley designs?
FAQsWhat type of material are pulleys made of?
FAQsAccessory pulley alignment should be checked using a straightedge if a pulley alignment issue is suspected. The straightedge should lie flat across the fascia of two adjacent pulleys. If the straightedge does not lie flat, then one of the pulleys is misaligned. To validate which of the pulleys is causing the issue, check each against other pulleys until you isolate the one that is out of line. Pulley alignment can also be checked with a laser alignment tool.
FAQsAre there any special tools needed to remove and install the pulley?
FAQsFlat, V-belt, and Multi groove
FAQsHow can I check to see if the replacement pulley is aligned with the adjacent accessory pulleys?
FAQsHow important is belt condition and tension?
Features and BenefitsDirect replacement of original pulley
Features and BenefitsPulley front fascia designed with O.E. cutouts for ease of pump removal or installation, where applicable.
Features and BenefitsSimple installation with correct tools
Features and BenefitsTested to meet same performance as O.E.
Features and BenefitsSame grade material and gauge as O.E. for strength and durability
Groove Quantity3
Item GradeStandard Replacement
Mount TypeSpline
Mounting Hardware IncludedNo
Mounting Hole Quantity1
Outside Diameter (in)4.56
Package ContentsPulley
Product ConditionNew
Shaft Diameter (mm)14.30
Width (Belt) (mm)109.00

DOWNLOADS:

INTERCHANGE:

  • Toyota: 4431107020
  • Lexus: 4431107020

APPLICATIONS:

  • 1997-2001 Lexus ES300
  • 1998-2003 Toyota Sienna
  • 1995-2004 Toyota Avalon
  • 1999-2003 Toyota Solara
  • 1995-2003 Toyota Camry
  • 2001-2001 Toyota Highlander

Product type:
Aftermarket
Features and Benefits:
Power steering pulleys are an important component in the drive system for belt-driven steering pumps and should be replaced during any power steering pump service. CARDONE New Power Steering Pulleys are manufactured using the most stringent quality p
Brand Description:
Power Steering Pump Pulley
Mounting Hardware Included:
No
Color:
Black
Hazardous Material:
No
Minimum Order Quantity:
1
Package Contents:
Pulley
Product Condition:
New
Mounting Hole Quantity:
1
E-Waste:
No
Item Grade:
Standard Replacement
FAQs:
Flat, V-belt, and Multi groove
FAQs:
Do you powder coat your pulleys?
FAQs:
Are there any special tools needed to remove and install the pulley?
FAQs:
Yes, use of the correct tool based on engine application and pulley type is necessary to prevent damage to the pulley.
FAQs:
What type of material are pulleys made of?
FAQs:
What are the different types of pulley designs?
FAQs:
The replacement pulley should be pressed to the point where the hub is flush with the end of the shaft.
FAQs:
Pulleys are typically made of plastic composite nylon or steel.
FAQs:
Pulleys are painted with weather resistant epoxy paint.
FAQs:
How important is belt condition and tension?
Life Cycle Status:
Available to Order
FAQs:
How far should the replacement pulley be pressed on the shaft for correct alignment with the other accessory pulleys?
Life Cycle Status Description:
Available to Order - Part is released to customers for ordering.
FAQs:
How can I check to see if the replacement pulley is aligned with the adjacent accessory pulleys?
Item Level GTIN:
00884548235786
Features and Benefits:
Same grade material and gauge as O.E. for strength and durability
Quantity Per Application:
1
Features and Benefits:
Pulley front fascia designed with O.E. cutouts for ease of pump removal or installation, where applicable.
Features and Benefits:
Direct replacement of original pulley
Fuel Type:
Serpentine
Electrical:
3
Filter Included:
Spline
Outside Diameter (in):
4.56
Shaft Diameter (mm):
14.30
Width (Belt) (mm):
109.00
Short Description:
PS Pump Pulley
Country of Origin:
China
Weight - Each (Gross Pounds):
1.2000
Height - Each (Inch):
2.2500
Length - Each (Inch):
10.2500
Width - Each (Inch):
6.5000



Need help? We're available at1-321-400-8080 - Email us atinfo@partsonnet.net orlive help
to top