24/7 Customer Service
CARDONE® Remanufactured Transfer Case Motors are designed to meet or exceed O.E. performance. Reverse engineering provides insight into how and why the unit originally failed, allowing our engineers to identify and correct original design weaknesses. Each unit is 100% computer tested at three points during the remanufacturing process to ensure reliability. CARDONE is committed to getting your vehicle back to peak performance with our direct-replacement transfer case motors.
| Component Housing Material | Steel |
| Connector/Terminal Configuration | Bullet |
| E-Waste | Yes |
| FAQs | The replacement motor drive is factory-set in the 2 wheel drive position. |
| FAQs | Yes, the transfer case should be manually shifted into the two-wheel drive position at the shift shaft before the installation of the replacement motor. Typically the positions are spring-loaded and can be rotated manually. |
| FAQs | The replacement motor drive is in a different position, can I reposition before installing? |
| FAQs | The Service 4WD light is on and/or the 4WD is inoperative. What could cause this condition? |
| FAQs | This may be caused by a transfer case control module calibration issue. Check for DTC's and calibration version - there may be a software update from the Original Equipment Manufacturer. If the motor attempts to shift, but sounds weak, check the front axle lock actuator. If the axle lock does not engage, the motor cannot complete its engagement. |
| FAQs | Can I install the replacement motor if my Transfer Case motor failed in 4 Wheel Drive Low or High? |
| FAQs | Do not operate motor off the Transfer Case or you will damage the motor and set an error code that must be cleared before the motor will operate. Shift the Transfer Case into the position of the motor to install. |
| FAQs | The replacement motor drive is placed in a 2 wheel drive position at the factory. |
| FAQs | What drivetrain position is the replacement motor drive placed in? |
| Features and Benefits | All motors are 100% torque tested to ensure strength for proper gear engagement. |
| Features and Benefits | Transfer case motor sensors are 100% replaced with new, O.E.-quality sensors for superior performance and long product life. |
| Features and Benefits | Each unit is 100% computer tested at 3 points during the remanufacturing process for guaranteed performance. |
| Features and Benefits | Motor magnets are 100% recharged for superior performance and reliability. |
| Features and Benefits | Every motor is assembled with the precise amount of lubricant to ensure quiet operation and long life. |
| Package Contents | Transfer Case Motor; Instruction Sheet |
| Product Condition | Remanufactured |
Cardone Industries
Building on decades of experience using reverse engineering to remanufacture automotive motors, CARDONE engineers have meticulously designed and tested our brand-new transfer case motors to match O.E...
