×
close

Shopping Cart:

Toggle menu
1-321-400-8080

24/7 Customer Service
0

$0.00

0
Cardone 67-1015 | Chrysler PT Cruiser Fuel Injection Throttle Body
click to zoom in

Cardone 67-1015 | Chrysler PT Cruiser Fuel Injection Throttle Body

(No reviews yet) Write a Review
$227.99
Part Number
CAD67-1015
UPC:
884548153813
Condition:
New
5 customers are viewing this product

video gallery

Description

Every CARDONE¨ Remanufactured Electronic Throttle Body undergoes a proprietary disassembly, inspection and renewal process. Each component is meticulously evaluated and then renewed or replaced, depending on whether the component meets our stringent engineering standards. A proprietary cleaning process prevents the throttle bore surface from deformity, ensuring optimum airflow. Every unit is tested for all critical functions, including response time and air flow at multiple points to ensure peak performance.

BRAND: Cardone Reman

FEATURES:

  • Chrysler PT Cruiser 2010-04
  • Fuel Injection Throttle Body
  • Reman. Fuel Injection Throttle Body
  • Remanufactured Fuel Injection Throttle Body
  • Throttle Body, Throttle, Fuel Injection Throttle Body, Intake, Air Intake, Throttle Valve, Carburetor, Manifold, TBI, ETB, Electronic Throttle Body, Mechanical Throttle Body, Throttle Bore, Throttle Blade

SPECIFICS:

Bore Diameter (mm)52
E-WasteYes
FAQsThe electronic throttle body is a powertrain component that has a plate, motor, and integrated position sensors which are utilized to regulate the amount of air entering the engine by opening the throttle valve to a desired angle via commands from the vehicles Powertrain Control Module or Throttle Actuator Control Module.
FAQsWhat else does the throttle body control other than idle air bypass and acceleration throughout driving range?
FAQsCan I purchase a throttle body with a bigger bore to increase horsepower and improve my throttle response?
FAQsIs it ok to bypass the coolant hoses?
FAQsDo you sell throttle body spacers?
FAQsThe most common failure in an Electronic Throttle Body is the integrated Throttle Position Sensor. The ETB is equipped with high and Low voltage reference Throttle Position Sensor for redundancy. Either one of these sensors could fail or possibly both.
FAQsWhat’s an Electronic Throttle body?
FAQsNo; bypassing of coolant hoses is not recommended. There are cases where we sell units without coolant pipes, because we are following OE supersessions where the pipes have been removed and instructions are provided for rerouting coolant hoses.
FAQsIs there anything that has to be done after installing the replacement throttle body?
FAQsHow do you test?
FAQsWe use an ultrasonic cleaning system with a rust-inhibiting detergent to clean the plate and bore.  For the exterior we use a glass bead blasting process.  We also go through further disassembly for cleaning of internal components.
FAQsWhat causes the Electronic Throttle Body to fail?
FAQsNot all throttle bodies have this feature where the throttle valve is reversed from its normal movement by the controlling module to break up any ice formation between the throttle bore and valve. This feature is based on application.
FAQsThe purpose of the attached coolant hoses is to keep the throttle body warm by the transfer of heat from the coolant to the housing preventing moisture from freezing between the throttle body bore and throttle valve during extreme cold temperatures.
FAQsHow do you clean?
FAQsPosition sensors are tested to match OE characteristics throughout entire range and final assemblies are tested for all critical functions, including response time and airflow at multiple points.
FAQsDo all throttle bodies have an ice breaker mode for extreme cold starts?
FAQsWhen an Electronic Throttle Body fails, the controlling module will illuminate the MIL/SES/CEL, the module will then activate a fail-safe mode operation and gradually reduce the engine’s speed back to an idle rpm.
FAQsSwapping your throttle body for one with a bigger bore is not recommended. The throttle bodies we sell are specific to the application.
FAQsWe do not sell Throttle Body spacers nor do we recommend the use of a spacer.
FAQsWhat do you replace?
FAQsWhat happens when an Electronic Throttle Body fails?
FAQsWe inspect and replace all damaged and worn components, including sensors, gears, connectors, seals, as well as certain components 100% of the time based on durability and function.
FAQsThe OE throttle body has coolant hoses attached.  What’s the purpose?
FAQsA relearn calibration procedure is necessary after installation of replacement throttle body.
FAQsThe throttle body is also utilized as part of the cruise control, traction control, stability control, and pre-crash systems, as well as other systems that require engine torque management.
Features and BenefitsOur remanufacturing process is earth-friendly, as it reduces the energy and raw material needed to make a new part by 80%.
Features and BenefitsAs a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit.
Features and BenefitsThe high and low integrated throttle position sensors are tested to match OE characteristics throughout the entire operational range.
Features and BenefitsA specialized component cleaning process prevents the throttle bore surface from being deformed, ensuring optimum airflow.
Features and BenefitsEach unit is guaranteed to function like the original.
Features and BenefitsFinal assemblies are tested for all critical functions, including response time and airflow at multiple points.
Features and BenefitsEach unit is disassembled and meticulously inspected. Each component is inspected, remanufactured or replaced resulting in reliable and consistent performance.
Housing Color/FinishGray
Housing MaterialAluminum
Idle Air Control Motor IncludedYes
Inlet Diameter (mm)60
Inlet TypeRound
Original Equipment ReplacementYes
Outlet Diameter (mm)53.00
Outlet TypeRound
Package ContentsElectronic Throttle Body; Instruction Sheet
Product ConditionRemanufactured
Throttle Body TypeMechanical
Throttle Body Actuation TypeElectric
Throttle Body FinishNatural
Throttle Body Inlet ShapeRound
Throttle Body MaterialPlastic, Steel, Aluminum
Throttle Body Outlet ShapeRound
Throttle Position Sensor IncludedYes
Venturi Quantity1

WARRANTY TIME: 12 Months

INTERCHANGE:

  • Chrysler: 5114400AA

APPLICATIONS:

  • 2004-2010 Chrysler PT Cruiser

Attributes
Product type:
Aftermarket
Features and Benefits:
Every CARDONE Remanufactured Electronic Throttle Body undergoes a proprietary disassembly, inspection and renewal process. Each component is meticulously evaluated and then renewed or replaced, depending on whether the component meets our stringent e
Brand Description:
Fuel Injection Throttle Body
Inlet Type:
Circle
Outlet Type:
Circle
Housing Material:
Aluminum
Hazardous Material:
No
Minimum Order Quantity:
1
Package Contents:
Electronic Throttle Body, Instruction Sheet
Product Condition:
Remanufactured
E-Waste:
Yes
FAQs:
When an Electronic Throttle Body fails, the controlling module will illuminate the MIL/SES/CEL, the module will then activate a fail-safe mode operation and gradually reduce the engine’s speed back to an idle rpm.
FAQs:
What’s an Electronic Throttle body?
FAQs:
What happens when an Electronic Throttle Body fails?
FAQs:
What else does the throttle body control other than idle air bypass and acceleration throughout driving range?
FAQs:
What do you replace?
FAQs:
What causes the Electronic Throttle Body to fail?
FAQs:
We use an ultrasonic cleaning system with a rust-inhibiting detergent to clean the plate and bore.  For the exterior we use a glass bead blasting process.  We also go through further disassembly for cleaning of internal components.
FAQs:
We inspect and replace all damaged and worn components, including sensors, gears, connectors, seals, as well as certain components 100% of the time based on durability and function.
FAQs:
We do not sell Throttle Body spacers nor do we recommend the use of a spacer.
FAQs:
The throttle body is also utilized as part of the cruise control, traction control, stability control, and pre-crash systems, as well as other systems that require engine torque management.
FAQs:
The purpose of the attached coolant hoses is to keep the throttle body warm by the transfer of heat from the coolant to the housing preventing moisture from freezing between the throttle body bore and throttle valve during extreme cold temperatures.
Life Cycle Status:
Available to Order
FAQs:
The OE throttle body has coolant hoses attached.  What’s the purpose?
Life Cycle Status Description:
Available to Order - Part is released to customers for ordering.
FAQs:
Swapping your throttle body for one with a bigger bore is not recommended. The throttle bodies we sell are specific to the application.
Item Level GTIN:
00884548153813
FAQs:
Position sensors are tested to match OE characteristics throughout entire range and final assemblies are tested for all critical functions, including response time and airflow at multiple points.
Quantity Per Application:
1
FAQs:
Not all throttle bodies have this feature where the throttle valve is reversed from its normal movement by the controlling module to break up any ice formation between the throttle bore and valve. This feature is based on application.
FAQs:
No; bypassing of coolant hoses is not recommended. There are cases where we sell units without coolant pipes, because we are following OE supersessions where the pipes have been removed and instructions are provided for rerouting coolant hoses.
FAQs:
Is there anything that has to be done after installing the replacement throttle body?
FAQs:
Is it ok to bypass the coolant hoses?
FAQs:
How do you test?
FAQs:
How do you clean?
FAQs:
Do you sell throttle body spacers?
FAQs:
Do all throttle bodies have an ice breaker mode for extreme cold starts?
FAQs:
Can I purchase a throttle body with a bigger bore to increase horsepower and improve my throttle response?
FAQs:
A relearn calibration procedure is necessary after installation of replacement throttle body.
Features and Benefits:
The high and low integrated throttle position sensors are tested to match OE characteristics throughout the entire operational range.
Features and Benefits:
Our remanufacturing process is earth-friendly, as it reduces the energy and raw material needed to make a new part by 80%.
Features and Benefits:
Final assemblies are tested for all critical functions, including response time and airflow at multiple points.
Features and Benefits:
Each unit is guaranteed to function like the original.
Features and Benefits:
Each unit is disassembled and meticulously inspected. Each component is inspected, remanufactured or replaced resulting in reliable and consistent performance.
Features and Benefits:
As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit.
Features and Benefits:
A specialized component cleaning process prevents the throttle bore surface from being deformed, ensuring optimum airflow.
Gasket or Seal Included:
No
Housing Color/Finish:
Gray/Unfinished
Short Description:
Throttle Body
Throttle Body Actuation Type:
Mechanical
Throttle Body Inlet Shape:
Round
Throttle Body Outlet Shape:
Round
California Proposition 65:
Plastic, Steel, Aluminum
Gasket Included:
Mechanical
Venturi Quantity:
1
Outlet Diameter (mm):
53
Outlet Count:
60
Bore Diameter (mm):
52
Fuel Injectors Included:
No
Fuel System Grade:
Regular
Fuel System Type:
Gas
Country of Origin:
United States
Weight - Each (Gross Pounds):
1.4600
Height - Each (Inch):
5.2500
Length - Each (Inch):
9.5630
Width - Each (Inch):
7.2500

Prop 65 WarningWARNING

This product can expose you to chemicals, including Plastic, Steel, Aluminum which is known to the State of California to cause cancer or birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.




Need help? We're available at1-321-400-8080 - Email us atinfo@partsonnet.net orlive help
to top