Cardone 72-2551 | Honda Civic Engine Control Module (ECM)
5 customers are viewing this product
CARDONE Remanufactured Electronic and Powertrain Control Modules are designed to meet or exceed O.E. performance. Reverse engineering provides insight into how and why the unit originally failed, allowing our engineers to identify and correct original design weaknesses. All critical components are re-soldered or replaced at our Philadelphia manufacturing plant, and each unit is 100% computer tested to ensure reliability. CARDONE is committed to getting your vehicle back to peak performance.
BRAND: Cardone Reman
FEATURES:
- Engine Control Computer
- Engine Control Computer, ECC, ECM, Engine Control Module, Computer, Module, PCM, Powertrain Control Module, Powertrain Module, Engine Module
- Honda Civic 2004-02
- Reman. Engine Control Computer
- Remanufactured Engine Control Computer
SPECIFICS:
Connector Quantity | 3 |
Connector Shape | Rectangle |
E-Waste | Yes |
FAQs | I replaced the PCM in my GM vehicle. Do I need to reset the Passlock or Passkey Vehicle Anti Theft System (VATS)? |
FAQs | Do all Ford vehicles require a Passive Anti Theft System (P.A.T.S) reset? |
FAQs | Chrysler PCM's identified with a "V" suffix will need to be vin programmed. |
FAQs | Prior to replacing the original ECM/PCM, the installer should determine what caused the original to fail. Common areas that cause failures are: poor grounds and powers, bad wiring harness, shorted solenoids/relays. |
FAQs | The replacement ECM for a Ford vehicle won’t start the vehicle. Why? |
FAQs | No, not all Ford vehicles require a PATS reset. Check the PATS chart found on the MotorCraft Site for your application. |
FAQs | The wrong ECM may have been installed. Verify the Ford Engineering Id number, found on the ECM/PCM, crosses to the correct CARDONE number. |
FAQs | Do all Chrysler Power Train Control Modules (PCM) need vin programming? |
FAQs | What steps should I take to assure the original ecm/pcm is causing the issue? |
FAQs | Yes, there's a 10 minute procedure utilizing a Tech 2 Scanner and a GM Terminal Subscription. There is also a 30 minute manual procedure that can be done without a scanner. Refer to an OE approved service manual for either option. |
Features and Benefits | Tested with automated computer equipment or bench-tested, depending on application, to ensure functionality. |
Features and Benefits | Re-soldering of critical components ensures superior electrical connections. This prevents intermittent failures and leads to longer product life. |
Features and Benefits | As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit. |
Features and Benefits | On-car vehicle validation is done to test durability and performance. |
Features and Benefits | Our remanufacturing process is earth-friendly, as it reduces the energy and raw material needed to make a new part by 80%. |
Flash Programming Required | No |
Flashable | No |
Housing Material | Aluminum |
Mounting Hardware Included | No |
Product Condition | Remanufactured |
Removable PROM | No |
Terminal Quantity | 31;24;31 |
Terminal Type | Pin|Male; Pin|Male; Pin|Male |
INTERCHANGE:
- Honda: 37820PLML03
- Honda: 37820PLM417
- Honda: 37820PLML04
APPLICATIONS:
- 2002-2004 Honda Civic
Product type:
Aftermarket
Features and Benefits:
CARDONE Remanufactured Electronic and Powertrain Control Modules are designed to meet or exceed O.E. performance. Reverse engineering provides insight into how and why the unit originally failed, allowing our engineers to identify and correct origina
Brand Description:
Engine Control Module
Terminal Type:
Pin|Male; Pin|Male; Pin|Male
Mounting Hardware Included:
No
Connector Shape:
Rectangle
Terminal Quantity:
31;24;31
Housing Material:
Aluminum
Connector Quantity:
3
Hazardous Material:
No
Minimum Order Quantity:
1
Product Condition:
Remanufactured
E-Waste:
Yes
FAQs:
What steps should I take to assure the original ecm/pcm is causing the issue?
FAQs:
The wrong ECM may have been installed. Verify the Ford Engineering Id number, found on the ECM/PCM, crosses to the correct CARDONE number.
FAQs:
The replacement ECM for a Ford vehicle won’t start the vehicle. Why?
FAQs:
Prior to replacing the original ECM/PCM, the installer should determine what caused the original to fail. Common areas that cause failures are: poor grounds and powers, bad wiring harness, shorted solenoids/relays.
FAQs:
No, not all Ford vehicles require a PATS reset. Check the PATS chart found on the MotorCraft Site for your application.
FAQs:
I replaced the PCM in my GM vehicle. Do I need to reset the Passlock or Passkey Vehicle Anti Theft System (VATS)?
FAQs:
Do all Ford vehicles require a Passive Anti Theft System (P.A.T.S) reset?
FAQs:
Do all Chrysler Power Train Control Modules (PCM) need vin programming?
FAQs:
Chrysler PCM's identified with a V suffix will need to be vin programmed.
Life Cycle Status:
Available to Order
FAQs:
Yes, there's a 10 minute procedure utilizing a Tech 2 Scanner and a GM Terminal Subscription. There is also a 30 minute manual procedure that can be done without a scanner. Refer to an OE approved service manual for either option.
Life Cycle Status Description:
Available to Order - Part is released to customers for ordering.
Features and Benefits:
Tested with automated computer equipment or bench-tested, depending on application, to ensure functionality.
Item Level GTIN:
00082617854498
Features and Benefits:
Re-soldering of critical components ensures superior electrical connections. This prevents intermittent failures and leads to longer product life.
Quantity Per Application:
1
Features and Benefits:
Our remanufacturing process is earth-friendly, as it reduces the energy and raw material needed to make a new part by 80%.
Features and Benefits:
On-car vehicle validation is done to test durability and performance.
Features and Benefits:
As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit.
Short Description:
Engine Ctrl Comp.
Flashable:
No
Removable PROM:
No
Flash Programming Required:
No
Weight - Each (Gross Pounds):
1.2190
Height - Each (Inch):
3.2500
Length - Each (Inch):
9.7500
Width - Each (Inch):
7.3750