×
close
click to zoom in

Cardone 96-5179 | Power Steering Pump

(No reviews yet) Write a Review
$98.99
Part Number
CAD96-5179
UPC:
884548254879
Condition:
New
5 customers are viewing this product

Building on decades of experience using reverse engineering to remanufacture power steering products, CARDONE engineers have meticulously designed and tested our CARDONE New Power Steering Pumps to fit and perform like the original. Each unit is supplied with premium high-temperature seals for reliability you can count on.

BRAND: Cardone New

FEATURES:

  • Ford Fusion 2009-06; Mercury Milan 2009-06
  • New Power Steering Pump
  • Power Steering Pump
  • Power Steering Pump, Steering Pump, Pump

SPECIFICS:

E-WasteNo
FAQsThere may be debris in the flow control valve bore not allowing the flow control valve to move as it should. (Valve and bore are located behind the high pressure fitting on the pump). The system must be checked for contamination and flushed.
FAQsI only have assist when increasing engine rpm after installing the replacement pump. What's causing this?
FAQsA whining pump is usually caused by air in the power steering system. Inspect the reservoir for proper fluid level. If fluid has foam or air bubbles present, air has entered the system or has not been properly bled (ensure all hoses/clamps are tight). Some systems require special vacuum bleeding procedures.
FAQsShould I ever change my fluid, even though nothing is wrong?
FAQsWhy do I still have hard steering in one direction after I replaced the pump?
FAQsThe pulley may have cracked upon removal. If the shaft was mushroomed before removing the pulley, it has now enlarged the bore in the pulley. The pulley must be replaced.
FAQsWhy is the pump making a whining noise all of the time?
FAQsI bought a replacement power steering pump and my original pulley has a loose fit on the replacement pump shaft. What should I do?
FAQsThe problem is most likely in the steering unit-the pump does not know left from right. Check for binding steering components and repair as necessary.
FAQsYes. Some O.E. manufacturers recommend that power steering fluid be changed at 50,000 miles and continue at that interval. Just like engine oil, power steering fluid will eventually break down and carry suspended contaminants from component wear and breakdown. Follow your vehicle's O.E. manufacturer's recommendations on fluid change intervals.
Features and BenefitsRigorous computer load testing ensures optimal performance and durability by incorporating real-world parameters during the test cycle.
Features and BenefitsPrecise bushing alignment prevents premature shaft and seal wear, significantly reducing noise and vibration.
Features and BenefitsMeets or exceeds O.E. performance.
Features and BenefitsManufactured with premium grade, high-temperature seals for added durability under all driving conditions.
Hose Port TypeO-ring
Housing MaterialAluminum
Mounting Hardware IncludedNo
Package ContentsHydraulic Pump; Instruction Sheet; Sealing Kit
Power Steering Outlet Thread Size14x1.5
Power Steering Pump Inlet Attachement TypeHose Barb
Power Steering Pump Outlet Attachment TypeThreaded
Power Steering Pump Outlet Quantity1
Power Steering Reservoir Cap IncludedYES
Product ConditionNew
Pulley Attachement TypePress-On
Pulley IncludedYes
Remote ReservoirNo
Reservoir IncludedYes

INTERCHANGE:

  • Mercury: 6E5Z3A696AB
  • Ford: 6E5Z3A696AB

APPLICATIONS:

  • 2006-2009 Ford Fusion
  • 2006-2009 Mercury Milan

Product type:
Aftermarket
Hazardous Material:
No
Minimum Order Quantity:
1
Item Level GTIN:
00884548254879
Quantity Per Application:
1



Need help? We're available at1-321-400-8080 - Email us atinfo@partsonnet.net orlive help
to top