×
close

Shopping Cart:

Toggle menu
1-321-400-8080

24/7 Customer Service
0

$0.00

0
ACDelco 172-2576 | Chevrolet Corvette Rear Right Disc Brake Caliper
click to zoom in

ACDelco 172-2576 | Chevrolet Corvette Rear Right Disc Brake Caliper

(No reviews yet) Write a Review
$430.99
Part Number
ACD172-2576
UPC:
707773889817
Condition:
New
5 customers are viewing this product

video gallery

Description

ACDelco GM Original Equipment Disc Brake Calipers are hydraulic components mounted over the brake rotor. The caliper acts as a clamp to press the brake pads against the brake rotor when the brakes are applied. These original equipment disc brake calipers have been manufactured to fit your GM vehicle, providing the same performance, durability, and service life you expect from General Motors. ? WARNING: Cancer and Reproductive Harm - https://www.P65Warnings.ca.gov

BRAND: ACDelco

FEATURES:

  • Chevrolet
  • GM-recommended replacement part for your GM vehicle's original factory component
  • Manufactured with GM Original Equipment specification for fit, form, and function
  • Offering the quality, reliability, and durability of GM OE

SPECIFICS:

Bleeder Thread Diameter10x1 0
Brake Caliper ManufacturerAkebono
Caliper ColorRed
Caliper Slides IncludedYes
Caliper TypeFixed
Good Maintenance Practices - Section 1 - Bullet 1Check brake fluid level at every oil change. Replace fluid according to owner's manual recommendations.
Good Maintenance Practices - Section 1 - Bullet 2Calipers and wheel cylinders should be checked every brake inspection and serviced or replaced as required.
Good Maintenance Practices - Section 1 - Bullet 3Inspect the brake lines for rust, punctures, or visible leaks (You may be able to do this, but consult a qualified technician if necessary).
Good Maintenance Practices - Section 1 - Bullet 4Check the thickness of your brake pads.
Good Maintenance Practices - Section 1 - HeaderThe following inspections and maintenance procedures can help prevent potential brake problems.
Good Maintenance Practices - Section 2 - Bullet 1Inspection of the brake hoses for brittleness or cracking.
Good Maintenance Practices - Section 2 - Bullet 2Inspection of brake lining and pads for wear or contamination by brake fluid or grease.
Good Maintenance Practices - Section 2 - Bullet 3Inspection of wheel bearings and grease seals.
Good Maintenance Practices - Section 2 - Bullet 4Parking brake adjustments (as needed).
Good Maintenance Practices - Section 2 - HeaderThe following should be conducted by a qualified technician:
Grade TypeRegular
Height (in)5.2
Inlet Fitting TypeStraight
Length (in)14.1
Mount Hole Diameter (in)304.8 in
Mount Hole Diameter (mm)12 mm
Mounting Bracket IncludedNo
Mounting Hardware IncludedNo
Pad Wear Sensor IncludedNo
Pads IncludedNo
Piston 1 Diameter (in)1.18
Piston 1 Diameter (mm)29.97
Piston 2 Diameter (in)1.18
Piston 2 Diameter (mm)29.97
Piston 3 Diameter (in)1.18
Piston 3 Diameter (mm)29.97
Piston 4 Diameter (in)1.18
Piston 4 Diameter (mm)29.97
Piston Quantity4
Programming RequiredNo
Signs of Wear & Troubleshooting - Section 1 - Bullet 1Vehicle pulls to the left or right when brakes are applied.
Signs of Wear & Troubleshooting - Section 1 - Bullet 2Brake pedal pulsation (not to be confused with normal ABS operation).
Weight (lb)8.25
Width (in)8.2

APPLICATIONS:

  • 2012-2013 Chevrolet Corvette - Position: Rear Right
    • SPORT SUSPENSION(FE3), SPECIAL SUSP(FE4), HEAVY DUTY ANTILOCK BRAKES(J56), BRAKE CALIPER COLOR(J6F)
  • 2006-2008 Chevrolet Corvette - Position: Rear Right
    • HEAVY DUTY ANTILOCK BRAKES(J56)
  • 2009-2011 Chevrolet Corvette - Position: Rear Right
    • SPECIAL SUSP(FE4), HEAVY DUTY ANTILOCK BRAKES(J56)

Attributes
Product type:
Aftermarket
Brand Description:
Rear Passenger Side Brake Caliper
Product Description:
Red Rear Passenger Side Disc Brake Caliper Assembly
Pad Wear Sensor Included:
No
Grade Type:
Regular
Mounting Hardware Included:
No
Programming Required:
No
Mounting Bracket Included:
No
Inlet Fitting Type:
Straight
Caliper Slides Included:
Yes
Hazardous Material:
No
Minimum Order Quantity:
1
Features & Benefits - Bullet 2:
Some ACDelco GM Original Equipment parts may have formerly appeared as GM Genuine Parts (OE) or ACDelco Professional
Features & Benefits - Bullet 4:
GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
Features & Benefits - Bullet 3:
ACDelco GM Original Equipment parts are designed, engineered and tested to rigorous standards, and are backed by General Motors.
Features & Benefits - Bullet 1:
Helps stop the vehicle when the brakes are applied
Weight (lb) (Pound):
8.25
Height (in) (Inch):
5.2
Width (in) (Inch):
8.2
Length (in) (Inch):
14.1
Signs of Wear & Troubleshooting - Section 1 - Bull:
Brake pedal pulsation (not to be confused with normal ABS operation).
Signs of Wear & Troubleshooting - Section 1 - Bull:
Vehicle pulls to the left or right when brakes are applied.
Life Cycle Status:
Announced
Features & Benefits - Bullet 5:
GM regularly updates production and service part designs to integrate new materials and technologies
Life Cycle Status Description:
Announced - Part has been announced to customers on a paper “New Number Announcement”. Part is active.
Good Maintenance Practices - Section 1 - Bullet 1:
Check brake fluid level at every oil change. Replace fluid according to owner's manual recommendations.
Item Level GTIN:
00707773889817
Good Maintenance Practices - Section 1 - Bullet 2:
Calipers and wheel cylinders should be checked every brake inspection and serviced or replaced as required.
Good Maintenance Practices - Section 1 - Bullet 3:
Inspect the brake lines for rust, punctures, or visible leaks (You may be able to do this, but consult a qualified technician if necessary).
Good Maintenance Practices - Section 1 - Bullet 4:
Check the thickness of your brake pads.
Good Maintenance Practices - Section 1 - Header:
The following inspections and maintenance procedures can help prevent potential brake problems.
Good Maintenance Practices - Section 2 - Bullet 1:
Inspection of the brake hoses for brittleness or cracking.
Good Maintenance Practices - Section 2 - Bullet 2:
Inspection of brake lining and pads for wear or contamination by brake fluid or grease.
Good Maintenance Practices - Section 2 - Bullet 3:
Inspection of wheel bearings and grease seals.
Good Maintenance Practices - Section 2 - Bullet 4:
Parking brake adjustments (as needed).
Good Maintenance Practices - Section 2 - Header:
The following should be conducted by a qualified technician:
Mount Hole Diameter (in):
304.8 in
Mount Hole Diameter (mm):
12 mm
Inlet Thread Diameter (Inch):
0.39
Piston Quantity:
4
Piston 1 Diameter (in) (Inch):
1.18
Inlet Thread Diameter (Millimeter):
10
Piston 1 Diameter (mm) (Millimeter):
29.97
Caliper Type:
Fixed
Bleeder Thread Diameter:
10x1 0
Caliper Color:
Red
Pads Included:
No
Piston 2 Diameter (in) (Inch):
1.18
Piston 2 Diameter (mm) (Millimeter):
29.97
Piston 4 Diameter (in) (Inch):
1.18
Piston 3 Diameter (in) (Inch):
1.18
Piston 4 Diameter (mm) (Millimeter):
29.97
Piston 3 Diameter (mm) (Millimeter):
29.97
Brake Caliper Manufacturer:
Akebono
Country of Origin:
United States
Weight - Each (Gross Pounds):
08.25
Height - Each (Inch):
05.20
Length - Each (Inch):
14.10
Width - Each (Inch):
08.20



Need help? We're available at1-321-400-8080 - Email us atinfo@partsonnet.net orlive help
to top