×
close
click to zoom in

StopTech 129.62102.16 | Chevrolet Corvette Front Right Disc Brake Rotor

(No reviews yet) Write a Review
$607.86
Part Number
CEN129.62102.16
UPC:
899590003269
Condition:
New
5 customers are viewing this product

StopTech AeroRotor Replacement Kits ARK are designed to replace your vehicle's original factory rotors| while retaining the factory brake calipers. Although the ARK is the same diameter and thickness as the factory rotors| it offers improved cooling| braking| and handling. The directional| floating AeroRotors allow independent expansion of the rotor and hat without "coning|" thanks to elongated drive pin holes. ARK components include AeroRotor friction rings with patented internal vane design| pre-assembled to billet aluminum AeroHats with directional stand-offs that optimize cooling airflow. The patented AeroRotor vane design pushes up to 80 percent more air than factory rotors for better cooling and reduced fade on the track. The aircraft-grade aluminum hats and 2-piece AeroRotors are up to 8 pounds lighter than stock rotors| allowing faster acceleration and deceleration| and improved handling. StopTech AeroRotors are available slotted or cross-drilled. These slots or holes allow better dissipation of heat| friction material and debris| assuring that fresh pad material is in contact with the rotor every time the brakes are applied. An optional anti-corrosion| zinc finish is available for customers in cold climates| where salt and chemicals are used to melt snow and ice. The zinc coating also benefits customers who prefer no visible surface rust on the vanes and outer circumference of the rotors. StopTech AeroRotors are 100 percent made in the USA.StopTech AeroRotor Replacement Kits ARK are designed to replace your vehicle's original factory rotors| while retaining the factory brake calipers. Although the ARK is the same diameter and thickness as the factory rotors| it offers improved cooling| braking| and handling. The directional| floating AeroRotors allow independent expansion of the rotor and hat without "coning|" thanks to elongated drive pin holes. ARK components include AeroRotor friction rings with patented internal vane design| pre-assembled to billet aluminum AeroHats with directional stand-offs that optimize cooling airflow. The patented AeroRotor vane design pushes up to 80 percent more air than factory rotors for better cooling and reduced fade on the track. The aircraft-grade aluminum hats and 2-piece AeroRotors are up to 8 pounds lighter than stock rotors| allowing faster acceleration and deceleration| and improved handling. StopTech AeroRotors are available slotted or cross-drilled. These slots or holes allow better dissipation of heat| friction material and debris| assuring that fresh pad material is in contact with the rotor every time the brakes are applied. An optional anti-corrosion| zinc finish is available for customers in cold climates| where salt and chemicals are used to melt snow and ice. The zinc coating also benefits customers who prefer no visible surface rust on the vanes and outer circumference of the rotors. StopTech AeroRotors are 100 percent made in the USA.StopTech AeroRotor Replacement Kits ARK are designed to replace your vehicle's original factory rotors| while retaining the factory brake calipers. Although the ARK is the same diameter and thickness as the factory rotors| it offers improved cooling| braking| and handling. The directional| floating AeroRotors allow independent expansion of the rotor and hat without "coning|" thanks to elongated drive pin holes. ARK components include AeroRotor friction rings with patented internal vane design| pre-assembled to billet aluminum AeroHats with directional stand-offs that optimize cooling airflow. The patented AeroRotor vane design pushes up to 80 percent more air than factory rotors for better cooling and reduced fade on the track. The aircraft-grade aluminum hats and 2-piece AeroRotors are up to 8 pounds lighter than stock rotors| allowing faster acceleration and deceleration| and improved handling. StopTech AeroRotors are available slotted or cross-drilled. These slots or holes allow better dissipation of heat| friction material and debris| assuring that fresh pad material is in contact with the rotor every time the brakes are applied. An optional anti-corrosion| zinc finish is available for customers in cold climates| where salt and chemicals are used to melt snow and ice. The zinc coating also benefits customers who prefer no visible surface rust on the vanes and outer circumference of the rotors. StopTech AeroRotors are 100 percent made in the USA.

BRAND: StopTech

FEATURES:

  • StopTech AeroRotor 2 Piece Black Hat No Rotor Coating Drilled| Front Right
  • Reduced Unsprung and Rotational Mass. Improved Thermal Capabilities. Optimized Heat Dissipation. Designed to Work with OE Calipers
  • StopTech Aero-Rotor
  • AeroRotor 2 Piece Black Hat No Rotor Coating Drilled| Front Right
  • Reduced Unsprung and Rotational Mass| Improved Thermal Capabilities| Optimized Heat Dissipation| Designed to Work with OE Calipers
  • StopTech| Stop-Tech. Stop Tech| StopTech AeroRotors| Aero-Rotors
  • 2006-2013 Chevrolet Corvette
  • AeroRotor 2 Piece Black Hat
  • StopTech Aero-Rotor
  • AeroRotor 2 Piece Black Hat No Rotor Coating Drilled| Front Right
  • 2006-2013 Chevrolet Corvette
  • AeroRotor 2 Piece Black Hat
  • StopTech AeroRotor 2 Piece Black Hat No Rotor Coating Drilled| Front Right
  • Reduced Unsprung and Rotational Mass. Improved Thermal Capabilities. Optimized Heat Dissipation. Designed to Work with OE Calipers
  • Reduced Unsprung and Rotational Mass| Improved Thermal Capabilities| Optimized Heat Dissipation| Designed to Work with OE Calipers
  • StopTech| Stop-Tech. Stop Tech| StopTech AeroRotors| Aero-Rotors
  • StopTech Aero-Rotor
  • AeroRotor 2 Piece Black Hat No Rotor Coating Drilled| Front Right
  • 2006-2013 Chevrolet Corvette
  • AeroRotor 2 Piece Black Hat
  • Reduced Unsprung and Rotational Mass| Improved Thermal Capabilities| Optimized Heat Dissipation| Designed to Work with OE Calipers
  • StopTech| Stop-Tech. Stop Tech| StopTech AeroRotors| Aero-Rotors
  • StopTech AeroRotor 2 Piece Black Hat No Rotor Coating Drilled| Front Right
  • Reduced Unsprung and Rotational Mass. Improved Thermal Capabilities. Optimized Heat Dissipation. Designed to Work with OE Calipers

SPECIFICS:

PositionFront Right
PositionFront Right
PositionFront Right
StyleDrilled
StyleDrilled
StyleDrilled
WARNING CA Proposition 65Yes
WARNING CA Proposition 65Yes
WARNING CA Proposition 65Yes
WARNING CA Proposition 65 MessageWARNING: Cancer and Reproductive Harm
WARNING CA Proposition 65 MessageWARNING: Cancer and Reproductive Harm
WARNING CA Proposition 65 MessageWARNING: Cancer and Reproductive Harm

DOWNLOADS:

APPLICATIONS:

  • 2012-2013 Chevrolet Corvette - Position: Front Right
    • Drilled| Black Hat| No Rotor Coating Right (J56)~355mm Fr & 330mm Rr~Iron Discs
  • 2006-2011 Chevrolet Corvette - Position: Front Right
    • Drilled| Black Hat| No Rotor Coating Right

Product type:
Aftermarket
Features and Benefits:
StopTech AeroRotor Replacement Kits ARK are designed to replace your vehicle's original factory rotors; while retaining the factory brake calipers. Although the ARK is the same diameter and thickness as the factory rotors; it offers improved cooling;
California Proposition 65:
WARNING: Cancer and Reproductive Harm
Brand Description:
StopTech AeroRotor 2 Piece Black Hat No Rotor Coating Drilled; Front Right
Product Description:
Reduced Unsprung and Rotational Mass. Improved Thermal Capabilities. Optimized Heat Dissipation. Designed to Work with OE Calipers
Short Description:
Aerorotor / Hat 2pc
Hazardous Material:
No
Minimum Order Quantity:
1
California Proposition 65 Site [basic]:
https://www.p65warnings.ca.gov/
Weight [cntrc] kgs:
11.840
Weight [cntrc] lbs:
26.050
Misc Holes [cntrc]:
5
Disc Mounting [cntrc]:
Floating
Nominal Thickness (Inch):
1.260
Stud/Lug Hole Diameter (Millimeter):
13.400
Discard Thickness (Inch):
1.181
Overall Height (Inch):
1.791
Outside Diameter (Millimeter):
355.000
ABS Tone Ring Included:
No
Solid Or Vented Type Rotor:
Vented
Stud/Lug Hole Diameter (Inch):
0.528
Center Hole Diameter (Inch):
2.783
Discard Thickness (Millimeter):
30.000
Mounting Bolt Hole Circle Diameter (Millimeter):
120.000
Life Cycle Status:
Available to Order
Bearings Included:
No
Life Cycle Status Description:
Available to Order - Part is released to customers for ordering.
Center Hole Diameter (Millimeter):
70.700
Item Level GTIN:
00899590003269
Nominal Thickness (Millimeter):
32.000
Quantity Per Application:
1
Mounting Bolt Hole Circle Diameter (Inch):
4.724
Stud/Lug Hole Quantity:
5
Outside Diameter (Inch):
13.976
Overall Height (Millimeter):
45.500
Product Grade:
Ultra-Premium
Country of Origin:
United States
Weight - Each (Gross Pounds):
20.1100
Height - Each (Inch):
2.0000
Length - Each (Inch):
15.0000
Width - Each (Inch):
15.0000

Prop 65 WarningWARNING

This product can expose you to chemicals, including WARNING: Cancer and Reproductive Harm which is known to the State of California to cause cancer or birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.




Need help? We're available at1-321-400-8080 - Email us atinfo@partsonnet.net orlive help
to top