×
close
click to zoom in

Edelbrock Victor Series 8812 | Chevrolet Corvette Engine Water Pump

(No reviews yet) Write a Review
$330.95
Part Number
EDE8812
UPC:
85347088126
Condition:
New
5 customers are viewing this product

Edelbrock #8812 water pump for all 1971-82 SBC Corvettes provides maximum cooling form the street and the race track. Water pump provide maximum flow, maximum pressure and equal distribution to both sides of the block with 1%.

BRAND: Edelbrock

FEATURES:

  • Impeller Vanes Dramatically Increase Flow Rates
  • Water Pump
  • Victor Series Water Pump
  • Only Flows In One Direction For Optimum Efficiency
  • Water Pump for Small-Block 1971-82 Corvettes in Satin Finish (Short)
  • Chevrolet:Small-Block Corvette:262 (4.3L)-400 (6.6L)
  • Impeller Is Larger Than Others For Max Pressure
  • Maximum Cooling for Street and Racing Engines
  • Equal Distribution to Both Sides of Block
  • Internal Passages Are Balanced for Maximum Flow
  • { eo : 0in.}
  • Water Pump for Small-Block 1971-82 Corvettes in Satin Finish (Short)
  • WATER PUMPS
  • Edelbrock; Water pump; passenger car; 8814; Big Block Chrysler; RB; B; 361-440
  • • 1969-76 vehicles (original pump casting #3853692) require the included spacer to be placed between the pump and the alternator bracket. • Some applications (original pump casting #364790) require power steering bracket spacer (included) • Some vehicles (original pump casting #6263701) require a through hole instead of the threaded hole for the power steering. If this is the case; drill out the threads with a 3/8in. drill bit. • Check closely for any interference with drive belts; some filing for clearance may be necessary with some applications. • Installation is the same as for original equipment water pumps. Consult service manual for specific procedures; if necessary • CAUTION: Be sure that fan bolts don t protrude through the hub so far that they hit the water pump housing • NOTE: Removal of backing plate is not recommended; as there are no user serviceable parts in the water pump. If backing plate is removed; use no sealer on O-ring equipped models; and use conventional gasket sealer (not RTV silicone) on gasketed models.

SPECIFICS:

Engine Make/SizeChevy Small Block (262-400)
FinishAs Cast
StyleStreet/High-Performance
TypeMechanical
WARNING CA Proposition 65Yes
WARNING CA Proposition 65 MessageWARNING: This product can expose you to Lead; which is known to the State of California to cause cancer or birth defects or other reproductive harm. For more information; visit www.P65warnings.ca.gov.

Short-Style; Standard Rotation; 3/4in. Pilot Shaft; 3/4in. Ball/Ball Bearing; 5 13/16in. Block To Hub Height; 1.80in. Inlet; Satin Finish

DOWNLOADS:

WARRANTY TIME: 12 Months

APPLICATIONS:

  • 1971-1982 Chevrolet Corvette

Product type:
Aftermarket
Features and Benefits:
Edelbrock #8812 water pump for all 1971-82 SBC Corvettes provides maximum cooling form the street and the race track. Water pump provide maximum flow, maximum pressure and equal distribution to both sides of the block with 1%.
Features and Benefits:
Impeller Is Larger Than Others For Max Pressure
Features and Benefits:
Impeller Vanes Dramatically Increase Flow Rates
Features and Benefits:
Equal Distribution to Both Sides of Block
Features and Benefits:
Only Flows In One Direction For Optimum Efficiency
Features and Benefits:
Maximum Cooling for Street and Racing Engines
Features and Benefits:
Internal Passages Are Balanced for Maximum Flow
Brand Description:
Victor Series Water Pump
Product Description:
Water Pump for Small-Block 1971-82 Corvettes in Satin Finish (Short)
Short Description:
WATER PUMPS
Hazardous Material:
No
Minimum Order Quantity:
1
Item Level GTIN:
00085347088126
Quantity Per Application:
1



Need help? We're available at1-321-400-8080 - Email us atinfo@partsonnet.net orlive help
to top