aFe Control is proud to release the PFADT Series, Solid Spherical Control Arm Bearing Set for the 97-13 Corvette. OE factory bushings are known to deflect more than a � inch in turns which equates to almost 1 degree of lost camber and unpredictable handling. Serious racers finally have an engineered solution for solid spherical control arm bearings. The elimination of bushing deflection has a number of benefits. The camber required is reduced because no camber c hange is seen from bushing deflection, resulting in more consistent lap times and a reduction in tire wear. Steering response is greatly improved and becomes sharp, crisp and predictable in all situations. The aFe Control kit replaces all 18 control arm bushings with mono-ball, spherical joints to e liminate friction and deflection. With 108 total components this high quality kit features 6061-T6 aluminum bearing housings which feature a special, Mil spec high corrosion resistant anodizing, CNC machined heat treated 17-4 PH stainless steel shafts, and CNC machined 6061-T6 articulation spacers. The replaceable bearings are Teflon lined for minimum friction, zero maintenance and are manufactured by FK bearing in the USA. This kit is designed to maximize the performance of your race car suspension. Due to the nature of this race part there is an increase in road noise, therefore we do not re commend this for the casual street car and is highly recommended for dedicated track cars.
| Position | N/A |
| WARNING CA Proposition 65 | Yes |
| WARNING CA Proposition 65 Message | WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov |
WARNINGThis product can expose you to chemicals, including WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov which is known to the State of California to cause cancer or birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.
Advanced FLOW Engineering
aFe Control is proud to release the PFADT Series, Solid Spherical Control Arm Bearing Set for the 97-13 Corvette. OE factory bushings are known to deflect more than a ¼ inch in turns which equates to...
Advanced FLOW Engineering
aFe CONTROL PFADT Series Rear-Upper Spherical Bushing Rebuild kit offers Teflon-Lined FK bearings and snap rings to rebuild a single PFADT Series rear upper control arm. This item will only replace a...
Advanced FLOW Engineering
aFe Control is proud to release the PFADT Series, Poly Control Arm Bushing Kit, for the C6 Z06Corvette. OE factory bushings are known to deflect more than a ¼ inch in turns which equates to almost 1...
Advanced FLOW Engineering
Upgrades factory end links to heavy duty, high articulation rod ends .BRAND: Advanced FLOW EngineeringFEATURES:Heavy Duty.5 in. PTFE Lined Rod EndsIncl. Grade 8 HardwareUpgrades Factory End Links To...
Advanced FLOW Engineering
aFe Control is proud to introduce the PFADT Series Heavy Rate Racing Sway Bar Front Service Kit for the 1997-2013 C5 & C6 Corvette. Corvette race cars see lots of action and this kit includes the...
