×
close
click to zoom in

ACDelco 506-1137 | Chevrolet Impala Front Left Suspension Strut Assembly

(No reviews yet) Write a Review
$116.99
Part Number
ACD506-1137
UPC:
193468032796
Condition:
New
5 customers are viewing this product

ACDelco GM Original Equipment Suspension Struts are GM-recommended replacements for your vehicle's original components. Suspension struts are similar to standard shock absorbers, but have the added function of maintaining part of the suspension design. They are an integral part of a vehicle's suspension system, providing structural support for the vehicle. These original equipment suspension struts have been manufactured to fit your GM vehicle, providing the same performance, durability, and service life you expect from General Motors. ? WARNING: Cancer and Reproductive Harm - https://www.P65Warnings.ca.gov

BRAND: ACDelco

FEATURES:

  • Chevrolet
  • GM-recommended replacement part for your GM vehicle's original factory component
  • Manufactured to GM OE specification for fit, form, and function
  • Offering the quality, reliability, and durability of GM OE

SPECIFICS:

AdjustableNo
Body MaterialSteel
FAQ - Answer 1Yes. Although shocks and struts perform a similar function, they vary greatly in their design. The major difference between shocks and struts is that a strut is a structural part of the vehicles suspension system where a shock is not. A strut is also a crucial part of the vehicles steering system and greatly affects alignment angles.
FAQ - Answer 2Yes. You should have your vehicle aligned if you are replacing your vehicle's struts. However, it is not necessary to get your vehicle aligned when replacing your vehicle's shocks unless there was a previous issue.
FAQ - Answer 3Yes. It is important to choose the correct shock or strut for your vehicle model and year, as well as for the location in the vehicle.
FAQ - Question 1Is there a difference between a shock and a strut?
FAQ - Question 2Should I have my vehicle aligned after replacing my shocks or struts?
FAQ - Question 3Do I need different shocks for front, rear, left, or right applications?
Fully Open Length (in)17.2421 in
Fully Open Length (mm)437.95 mm
Good Maintenance Practices - Section 1 - Bullet 1Ball joints and other suspension components
Good Maintenance Practices - Section 1 - Bullet 2Brakes
Good Maintenance Practices - Section 1 - Bullet 3Tires
Good Maintenance Practices - Section 1 - HeaderYour vehicle's struts slowly deteriorate over time, though this wear is normally difficult to detect. Worn struts can also cause additional wear to other vehicle components, so to maximize your vehicle's ride comfort, it is recommended to inspect your vehicle's struts every year. Be sure to always refer to your Vehicle Owner's manual for additional vehicle maintenance practices. Potential affected components may include:
Good Maintenance Practices - Section 2 - Bullet 1Leaking oil or wetness along the body of the shock or strut
Good Maintenance Practices - Section 2 - Bullet 2Broken mounts
Good Maintenance Practices - Section 2 - Bullet 3Broken, damaged, or missing mounting hardware
Good Maintenance Practices - Section 2 - Bullet 4Dented reservoir tube
Good Maintenance Practices - Section 2 - Bullet 5Bent or scratched piston rod
Good Maintenance Practices - Section 2 - Bullet 6Cupped tire wear
Good Maintenance Practices - Section 2 - Bullet 7Damaged spring seat, spring, and spring isolator
Good Maintenance Practices - Section 2 - Bullet 8Damaged strut bearing
Good Maintenance Practices - Section 2 - HeaderTo inspect your struts to gauge wear, check for:
Height (in)8
Internal Construction TypeDual Tube
Length (in)23.75
Lower Mount TypeBracket
Meets or Exceeds Original Equipment Manufacture SpecificationsYes
Mounting Hardware IncludedNo
Outside Cylinder Diameter (in)2.126
Outside Cylinder Diameter (mm)54
Programming RequiredNo
Shaft Diameter (in)0.8661
Shaft Diameter (mm)22
Signs of Wear & Troubleshooting - Section 1 - Bullet 1Vehicle pulls while braking
Signs of Wear & Troubleshooting - Section 1 - Bullet 2Worn suspension components
Signs of Wear & Troubleshooting - Section 1 - Bullet 3Excessive nose dive while braking
Signs of Wear & Troubleshooting - Section 1 - Bullet 4Vehicle has 'acceleration squat'
Signs of Wear & Troubleshooting - Section 1 - Bullet 5Vehicle does not sit level
Signs of Wear & Troubleshooting - Section 1 - Bullet 6Vehicle steering pulls
Signs of Wear & Troubleshooting - Section 1 - HeaderSigns of wear for suspension struts include but are not limited to:
Signs of Wear & Troubleshooting - Section 2 - Bullet 1Your ride is harsh, bumpy or shaky
Signs of Wear & Troubleshooting - Section 2 - Bullet 2Your vehicle bounces excessively
Signs of Wear & Troubleshooting - Section 2 - Bullet 3Your vehicle leans or sways while turning
Signs of Wear & Troubleshooting - Section 2 - Bullet 4Your vehicle bottoms out
Signs of Wear & Troubleshooting - Section 2 - HeaderIt could be time to replace your struts if, when driving on a surface with bumps and/or dips:
Signs of Wear & Troubleshooting - Section 3 - Bullet 1You notice fluid leakage from your vehicle's struts
Signs of Wear & Troubleshooting - Section 3 - Bullet 2Your vehicle's struts have dented or heavily scratched housings or mounts
Signs of Wear & Troubleshooting - Section 3 - HeaderUneven patches of wear on the edges of your tire can be a sign of weak ride control (shocks or struts). This wear, called cupping, appears as scalloped dips around the surface of the tread. Other signs it could be time to replace your shocks or struts include but are not limited to:
Upper Mount TypeThreaded Rod
Weight (lb)11.6
Width (in)8.62

TIRE(Q2B), TIRE(RAL)

DOWNLOADS:

APPLICATIONS:

  • 2014-2020 Chevrolet Impala - Position: Front Left

Product type:
Aftermarket
Brand Description:
Front Driver Side Suspension Strut
Grade Type:
Regular
Mounting Hardware Included:
No
Body Material:
Steel
Body Color:
Black
Adjustable:
No
Contains Spring:
No
Lower Mount Type:
Bracket
Upper Mount Type:
Stud
Boot Included:
No
Extended Length (Inch):
17.24
Internal Construction Type:
Dual Tube
Internal Damper:
Gas
Hazardous Material:
No
Minimum Order Quantity:
1
Features & Benefits - Bullet 2:
Offering the quality, reliability, and durability of GM OE
Features & Benefits - Bullet 3:
Manufactured to GM OE specification for fit, form, and function
Features & Benefits - Bullet 1:
GM-recommended replacement part for your GM vehicle's original factory component
Weight (lb) (Pound):
10
Height (in) (Inch):
8
Life Cycle Status:
Announced
Width (in) (Inch):
8.6
Life Cycle Status Description:
Announced - Part has been announced to customers on a paper “New Number Announcement”. Part is active.
Length (in) (Inch):
23.7
Item Level GTIN:
00193468032796
Signs of Wear & Troubleshooting - Section 1 - Bull:
Worn suspension components
Signs of Wear & Troubleshooting - Section 1 - Bull:
Vehicle steering pulls
Signs of Wear & Troubleshooting - Section 1 - Bull:
Vehicle pulls while braking
Signs of Wear & Troubleshooting - Section 1 - Bull:
Vehicle does not return to a neutral position
Signs of Wear & Troubleshooting - Section 1 - Bull:
Strut mount or bearing noise
Signs of Wear & Troubleshooting - Section 1 - Bull:
Excessive nose dive while braking
FAQ - Answer 2:
Yes. You should have your vehicle aligned if you are replacing your vehicle's struts.
FAQ - Question 3:
Do I need different struts for front, rear, left, or right applications?
FAQ - Question 1:
Is there a difference between a shock and a strut?
FAQ - Question 2:
Should I have my vehicle aligned after replacing my struts?
Signs of Wear & Troubleshooting - Section 1 - Head:
Signs of wear for suspension struts include but are not limited to:
Good Maintenance Practices - Section 1 - Bullet 1:
Brakes
Good Maintenance Practices - Section 1 - Bullet 2:
Ball joints
Good Maintenance Practices - Section 1 - Bullet 3:
Tires
Good Maintenance Practices - Section 1 - Bullet 4:
Stabilizer bar
FAQ - Answer 3:
Yes. It is important to choose the correct strut for your vehicle model and year, as well as for the location in the vehicle.
Good Maintenance Practices - Section 1 - Bullet 5:
Stabilizer links
Good Maintenance Practices - Section 2 - Bullet 1:
Leaking oil or wetness along the body of the shock or strut
Good Maintenance Practices - Section 2 - Bullet 2:
Broken mounts
Good Maintenance Practices - Section 2 - Bullet 3:
Broken, damaged, or missing mounting hardware
Good Maintenance Practices - Section 2 - Bullet 4:
Severely dented reservoir tube
Good Maintenance Practices - Section 2 - Bullet 5:
Bent or scratched piston rod
Signs of Wear & Troubleshooting - Section 2 - Bull:
Your vehicle leans or sways while turning
Signs of Wear & Troubleshooting - Section 2 - Bull:
Your vehicle bounces excessively
Signs of Wear & Troubleshooting - Section 2 - Bull:
Your vehicle bottoms out
Signs of Wear & Troubleshooting - Section 2 - Bull:
Your ride is harsh, bumpy or shaky
Signs of Wear & Troubleshooting - Section 2 - Head:
It could be time to replace your shocks or struts if, when driving on a surface with bumps and/or dips:
Signs of Wear & Troubleshooting - Section 3 - Bull:
You notice fluid leakage from your vehicle's shocks or struts
Signs of Wear & Troubleshooting - Section 3 - Bull:
Your vehicle's shocks or struts have dented or heavily scratched housings or mounts
Good Maintenance Practices - Section 2 - Header:
To inspect your struts to gauge wear, check for:
Good Maintenance Practices - Section 2 - Bullet 7:
Damaged spring seat, spring, and spring isolator
Good Maintenance Practices - Section 2 - Bullet 6:
Cupped tire wear
Good Maintenance Practices - Section 2 - Bullet 8:
Damaged strut bearing
Shaft Diameter (in) (Inch):
0.87
Shaft Diameter (mm) (Millimeter):
22.1
Extended Length (Millimeter):
437.9
Outside Cylinder Diameter (in) (Inch):
2.13
Country of Origin:
United States
Weight - Each (Gross Pounds):
10.00
Height - Each (Inch):
08.00
Length - Each (Inch):
23.70
Width - Each (Inch):
08.60



Need help? We're available at1-321-400-8080 - Email us atinfo@partsonnet.net orlive help
to top