×
close

Shopping Cart:

Toggle menu
1-321-400-8080

24/7 Customer Service
0

$0.00

0
ACDelco 18J4666 | Rear Right Brake Hydraulic Hose
click to zoom in

ACDelco 18J4666 | Rear Right Brake Hydraulic Hose

(No reviews yet) Write a Review
$26.99
Part Number
ACD18J4666
UPC:
707773962565
Condition:
New
5 customers are viewing this product

video gallery

Description

ACDelco Brake Hydraulic Hoses are quality reinforced hoses that carry fluid to transmit force within the hydraulic brake system. Each brake hose contains double-crimped fittings to provide longer service life and durability. The ACDelco Professional Brake Hydraulic Hose is a high quality replacement component for your vehicle's braking system. ? WARNING: Cancer and Reproductive Harm - https://www.P65Warnings.ca.gov

BRAND: ACDelco

FEATURES:

  • Dodge|Ram
  • Includes OE features such as brackets, grommets, molded plastic guards, and wire clips to provide correct fit and easy installation
  • Performs to standards required by OE manufacturers ensuring optimal protection, service life, and safety
  • Premium brass fittings provide an excellent hydraulic seal

SPECIFICS:

Bracket MaterialCorrosion Resistant Steel
ColorBlack Hose
End 1 Fitting MaterialCorrosion Resistant Steel
End 1 Fitting TypeBanjo
End 1 Thread Diameter (in)0.393
End 1 Thread Diameter (mm)10
End 2 Fitting MaterialCorrosion Resistant Steel
End 2 Fitting Type3/8"-24
FAQ - Answer 1Yes, ACDelco Professional Brake Kits and Hardware come with a 12 month/ unlimited mile warranty.
FAQ - Answer 2Yes, it is a good idea to inspect your brake fluid often.
FAQ - Answer 3Yes, both part offerings are high quality replacement parts.
FAQ - Question 1Are these brake parts durable?
FAQ - Question 2Do I need to check my brake fluid when replacing other brake parts?
FAQ - Question 3Can I use ACDelco GM Original Equipment parts with my ACDelco Professional brake parts?
Gasket Or Seal IncludedYes
Good Maintenance Practices - Section 1 - Bullet 1Check brake fluid level at every oil change. Replace fluid according to owner's manual recommendations.
Good Maintenance Practices - Section 1 - Bullet 2Calipers and wheel cylinders should be checked every brake inspection and serviced or replaced as required.
Good Maintenance Practices - Section 1 - Bullet 3Inspect the brake lines for rust, punctures, or visible leaks (You may be able to do this, but consult a qualified technician if necessary).
Good Maintenance Practices - Section 1 - Bullet 4Check the thickness of your brake pads.
Good Maintenance Practices - Section 1 - HeaderThe following inspections and maintenance procedures can help prevent potential brake problems:
Good Maintenance Practices - Section 2 - Bullet 1Inspection of the brake hoses for brittleness or cracking.
Good Maintenance Practices - Section 2 - Bullet 2Inspection of brake lining and pads for wear or contamination by brake fluid or grease.
Good Maintenance Practices - Section 2 - Bullet 3Inspection of wheel bearings and grease seals.
Good Maintenance Practices - Section 2 - Bullet 4Parking brake adjustments (as needed).
Good Maintenance Practices - Section 2 - HeaderThe following should be conducted by a qualified technician:
Height (in)1.3
Jacket MaterialEPDM Rubber
Length (in)7.3
Mounting Hardware IncludedYes
Programming RequiredNo
Signs of Wear & Troubleshooting - Section 1 - Bullet 1Brake warning light is on.
Signs of Wear & Troubleshooting - Section 1 - Bullet 2Fluid spots beneath the car, indicating there may be a leak within the cylinder.
Signs of Wear & Troubleshooting - Section 1 - Bullet 3Difficulty stopping the vehicle.
Signs of Wear & Troubleshooting - Section 1 - Bullet 4A low or sinking brake pedal.
Signs of Wear & Troubleshooting - Section 1 - Bullet 5Brake pedal pulsation (not to be confused with normal ABS operation).
Signs of Wear & Troubleshooting - Section 1 - Bullet 6Vehicle pulls to the left or right when brakes are applied.
Signs of Wear & Troubleshooting - Section 1 - HeaderBrake signs of wear include:
Teflon LinedNo
Weight (lb)0.3
Width (in)5.8

w/ 8 Lug Wheels

APPLICATIONS:

  • 2004-2004 Dodge Ram 2500 - Position: Rear Right
  • 2006-2010 Dodge Ram 2500 - Position: Rear Right
  • 2003-2003 Dodge Ram 3500 Van - Position: Rear Right
  • 2003-2010 Dodge Ram 3500 - Position: Rear Right
  • 2011-2011 Ram 2500 - Position: Rear Right
  • 2008-2008 Dodge Ram 1500 - Position: Rear Right
  • 2011-2011 Ram 3500 - Position: Rear Right

Attributes
Product type:
Aftermarket
Brand Description:
Rear Passenger Side Brake Hose
Product Description:
Rear Passenger Side Hydraulic Brake Hose Assembly
Mounting Hardware Included:
Yes
Programming Required:
No
Color:
Black Hose
Gasket Or Seal Included:
Yes
Axis 1 Length (Inch):
8.6
Bracket Material:
Corrosion Resistant Steel
End 2 Fitting Type:
3/8-24
Hazardous Material:
No
Minimum Order Quantity:
1
Features & Benefits - Bullet 2:
Premium brass fittings provide an excellent hydraulic seal
Features & Benefits - Bullet 3:
Performs to standards required by OE manufacturers ensuring optimal protection, service life, and safety
Features & Benefits - Bullet 1:
Includes OE features such as brackets, grommets, molded plastic guards, and wire clips to provide correct fit and easy installation
Weight (lb) (Pound):
0.3
Height (in) (Inch):
1.3
Width (in) (Inch):
5.8
Length (in) (Inch):
7.3
Signs of Wear & Troubleshooting - Section 1 - Bull:
Brake warning light is on.
Signs of Wear & Troubleshooting - Section 1 - Bull:
Brake pedal pulsation (not to be confused with normal ABS operation).
Signs of Wear & Troubleshooting - Section 1 - Bull:
A low or sinking brake pedal.
Life Cycle Status:
Announced
Signs of Wear & Troubleshooting - Section 1 - Bull:
Vehicle pulls to the left or right when brakes are applied.
Life Cycle Status Description:
Announced - Part has been announced to customers on a paper “New Number Announcement”. Part is active.
Signs of Wear & Troubleshooting - Section 1 - Bull:
Fluid spots beneath the car, indicating there may be a leak within the cylinder.
Item Level GTIN:
00707773962565
Signs of Wear & Troubleshooting - Section 1 - Bull:
Difficulty stopping the vehicle.
FAQ - Answer 2:
Yes, it is a good idea to inspect your brake fluid often.
FAQ - Question 3:
Can I use ACDelco GM Original Equipment parts with my ACDelco Professional brake parts?
FAQ - Question 1:
Are these brake parts durable?
FAQ - Question 2:
Do I need to check my brake fluid when replacing other brake parts?
Signs of Wear & Troubleshooting - Section 1 - Head:
Brake signs of wear include:
FAQ - Answer 1:
Yes, ACDelco Professional Brake Kits and Hardware come with a 12 month/ unlimited mile warranty.
Good Maintenance Practices - Section 1 - Bullet 1:
Check brake fluid level at every oil change. Replace fluid according to owner's manual recommendations.
Good Maintenance Practices - Section 1 - Bullet 2:
Calipers and wheel cylinders should be checked every brake inspection and serviced or replaced as required.
Good Maintenance Practices - Section 1 - Bullet 3:
Inspect the brake lines for rust, punctures, or visible leaks (You may be able to do this, but consult a qualified technician if necessary).
Good Maintenance Practices - Section 1 - Bullet 4:
Check the thickness of your brake pads.
FAQ - Answer 3:
Yes, both part offerings are high quality replacement parts.
Good Maintenance Practices - Section 1 - Header:
The following inspections and maintenance procedures can help prevent potential brake problems:
Good Maintenance Practices - Section 2 - Bullet 1:
Inspection of the brake hoses for brittleness or cracking.
Good Maintenance Practices - Section 2 - Bullet 2:
Inspection of brake lining and pads for wear or contamination by brake fluid or grease.
Good Maintenance Practices - Section 2 - Bullet 3:
Inspection of wheel bearings and grease seals.
Good Maintenance Practices - Section 2 - Bullet 4:
Parking brake adjustments (as needed).
Good Maintenance Practices - Section 2 - Header:
The following should be conducted by a qualified technician:
Teflon Lined:
No
End 1 Thread Diameter (in) (Inch):
0.393
End 1 Fitting Type:
Banjo
End 1 Thread Diameter (mm) (Millimeter):
10
Axis 1 Length (Millimeter):
0
End 1 Fitting Material:
Corrosion Resistant Steel
End 2 Fitting Material:
Corrosion Resistant Steel
Jacket Material:
EPDM Rubber
Country of Origin:
China
Weight - Each (Gross Pounds):
00.30
Weight - Case (Gross Pounds):
06.00
Height - Each (Inch):
01.30
Height - Case (Inch):
08.80
Length - Each (Inch):
07.30
Length - Case (Inch):
11.10
Width - Each (Inch):
05.80
Width - Case (Inch):
10.30



Need help? We're available at1-321-400-8080 - Email us atinfo@partsonnet.net orlive help
to top