Premium DiamondFIRE Power Racing Spark Plug; Non-Resistor; 5/8 in. Hex Size; 0.750 in Thread Reach; 12mm Thread Diameter; Gasket Seat; DiamondFIRE Tip w/Fixed Gap;
FEATURES:
Racing spark plug that is used in a variety of race engine applications.
Our company was formed to find a better design that would provide E3 customers with performance advantages such as increased power, improved fuel efficiency, and a reduction in hazardous engine emissions that can contribute to global warming. With decades of experience in spark plug engineering and the automotive aftermarket, the principals of E3 Spark Plugs realized that the key to producing a better spark plug did not lie in the use of fancy metals, such as iridium or platinum. Instead, it would require an entirely new approach in the design of the plug's electrode to improve the ignition of raw fuel inside the engine's combustion area. The first step would be to get rid of the antiquated J-wire electrode. This would allow the flame kernel to move directly toward the unburned air/fuel mixture. E3's initial research started in its own laboratories and led to the testing of new designs at two leading engineering universities. After investing in years of research and assisted by top professors in the field of combustion and engine dynamics, the DiamondFire ground electrode was developed as a better way to ignite the fuel-air mixture inside the engine's cylinder. Since this advanced design increased the combustion pressure inside the engine before raw fuel was exhausted, they had discovered a better way to control the burn. A faster flame speed and improvements in directing the spark inside the combustion area resulted in a marked (and proven) increase in power output, fuel efficiency, and reduced emissions for gasoline-powered engines. These results were validated using the some of the most sophisticated testing equipment available. Over and over again, the new plug burned fuel more efficiently, improved power response, and cut toxic emissions. Today, E3 remains dedicated to reducing greenhouse gas emissions by limiting the amount of unburned fuel.
WARNINGThis product can expose you to chemicals, including WARNING: This product can expose you to chemicals, including chromium, which is know to the State of California to cause cancer or birth defects or other reproductive harm. For more information, visit www.P65Warnings.ca.gov which is known to the State of California to cause cancer or birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.
E3 Spark Plugs
E3.40 is a 14mm, 0.460 in. reach plug with a taper seat. It fits domestic applications in the 60's to early 90's, and is widely stocked in automotive retail stores. E3 automotive plugs have three...
E3 Spark Plugs
E3.58 is a 14mm, 0.750 in. reach plug with a gasket seat. E3.58 also has an additional extension, or skirt, just below the threads that extends the reach to 0.917 inches. It fits a wide variety of...
E3 Spark Plugs
Late Model Ford Coyote/Chrysler Hemi racing spark plug for high hp boosted applicationsBRAND: E3 Spark PlugsFEATURES:Burn Fuel More Efficiently By Burning Fuel More CompletelyE3 Equipped Engines Can...
E3 Spark Plugs
E3.38 is a 10mm, 0.750 in. reach plug with a gasket seat. It is used in a variety of powersport applications, especially import motorcycles. E3.38 is often in used in Honda, Suzuki, Yamaha, and other...
E3 Spark Plugs
E3.68 is a 14mm, 1.000 in. reach plug with a gasket seat. It fits a wide variety of late model applications, especially Hemi applications. E3.68 is widely stocked in automotive retail stores. E3...
