Edelbrock Performer-Plus Camshaft #2117 is designed for 283-400 Chevy V8 engines from 1957-86 and produce optimum torque from the low-end to the mid-range. Performer-Plus camshafts should be matched with Performer manifolds for vehicles operating from off-idle to 5500 rpm. The Performer-Plus #2117 is a smooth idling cam for daily drivers, trucks, vans, RVs and 4x4s. You can expect a major improvement in throttle response and torque. In the manifold section you'll find torque graphs showing the power gains from Performer manifolds and Performer-Plus cams. All camshafts include flat tappet lifters (except for cams designed for use with stock roller lifters), assembly lube and instructions. This cam produced 338 HP and 389 Ft Lbs of Torque when paired with Performer EPS intake manifold #2701, E-Street cylinder heads #5089 and E-Street EFI system #3664.Camshaft specifications:- Intake duration: 218 Degrees- Exhaust duration: 224 Degrees- Intake lift: .464"- Exhaust lift: .470"- Lobe separation: 114 Degree- Intake Center Line: 110 Degree- Vacuum: 15"
| Engine Make/Size | Chevy Small Block (262-400) |
| Exh. Duration @ .050 in. (Deg) | 224 |
| Exh. Duration Advertised (Deg) | N/A |
| Exhaust Valve Lift | 0.470 in. |
| Intake Duration @ 0.050 in. | 218 Degree |
| Intake Duration Advertised | N/A |
| Intake Valve Lift | 0.464 in. |
| Lifter Type | Hydraulic Flat Tappet |
| RPM Range | 1000-5600 |
| Usage | Street/Performance |
| WARNING CA Proposition 65 | Yes |
| WARNING CA Proposition 65 Message | WARNING: This product can expose you to Chromium; which is known to the State of California to cause cancer or birth defects or other reproductive harm. For more information; visit www.P65warnings.ca.gov. |
Edelbrock
Edelbrock part #2192 Performer-Plus camshaft is designed for 1968 and later big-block Chrysler 383-400-440 V-8 applications. This Edelbrock cam kit produced 427 ft-lbs. of torque when used with #2191...
Edelbrock
Edelbrock Performer-Plus Camshaft #2132 is designed for 290-401 AMC V8 engines and produce optimum torque from the low-end to the mid-range. Performer-Plus camshafts should be matched with Performer...
Edelbrock
Edelbrock part #3712 Performer-Plus camshaft is designed for small-block Oldsmobile 350-403 V-8 applications. This Edelbrock cam kit produced 330 ft-lbs. of torque when used with #3711 intake and...
Edelbrock
Edelbrock part #2177 Performer-Plus camshaft is designed for small-block Chrysler 318-340-360 V-8 applications. This Edelbrock cam kit produced 305 ft-lbs. of torque when used with #2176 intake and...
Edelbrock
Edelbrock part #7102 Performer RPM Camshaft is designed for 1957-1986 small-block Chevy 283-400 V-8 applications. This Edelbrock cam kit produced 410 HP & 408 ft-lbs. of torque when used with...
