×
close
click to zoom in

Edelbrock 2122 | Engine Camshaft and Lifter Kit

(No reviews yet) Write a Review
$321.95
Part Number
EDE2122
UPC:
85347021222
Condition:
New
5 customers are viewing this product

Edelbrock Performer-Plus Camshaft #2122 is designed for 289-302 Ford V8 engines and produces optimum torque from the low-end to the mid-range. Performer-Plus camshafts should be matched with Performer manifolds for vehicles operating from off-idle to 5500 rpm. The Performer-Plus #2122 is a smooth idling cam for daily drivers, trucks, vans, RVs and 4x4s. You can expect a major improvement in throttle response and torque. In the manifold section you'll find torque graphs showing the power gains from Performer manifolds and Performer-Plus cams. All camshafts include flat tappet lifters (except for cams designed for use with stock roller lifters), assembly lube and instructions. This cam produced 310HP and 260 Ft Lbs of Torque when paired with Performer 289 intake manifold #2121 and Performer cylinder heads #60329. Not for 1985 and later engines with roller lifters.Camshaft specifications:- Intake duration: 204 Degrees- Exhaust duration: 214 Degrees- Intake lift: .448"- Exhaust lift: .472"- Lobe separation: 112 Degree- Intake Center Line: 107 Degree- Vacuum: 16"

BRAND: Edelbrock

FEATURES:

  • CAMSHAFTS
  • Matched to Edelbrock Performer Intakes
  • Maximum Performance From Idle through Mid-Range
  • Recommended Valve Springs for OEM heads: Edelbrock part #5822 non-rotator/# 5922 Rotator; In order for this Performer-Plus cam and lifter kit to be covered under ANY WARRANTY you must use either the correct Edelbrock Sure Seat valve springs or the stock o
  • Performer-Plus Camshaft Kit for Small-Block Ford 289-302 V8
  • Major Improvement in Throttle Response and Torque
  • Edelbrock Performer-Plus Camshaft Kit for Small-Block Ford 289-302 V8
  • { eo : 3in.}
  • Cam Lift kt
  • Ford:Small-Block Windsor:289 (4.7L)/302 (5.0L)
  • Performer-Plus Camshaft Kit
  • Designed for Optimum Torque and Acceleration
  • Includes Hydraulic Lifters and Assembly Lube
  • Take the Guesswork Out of Camshaft Selection!
  • Use For Daily Drivers/Trucks/Vans/RVs/4x4s
  • 21311; AMC; Jeep; Edelbrock; Intake Manifold; Intake; Manifold; Dual-Plane; Single-Plane; Tunnel-Ram; Cross-Ram; Performer; Performer RPM; Victor JR.; Super Victor; Victor; Dual-Quad; Slingshot; Polished

SPECIFICS:

Engine Make/SizeFord 260-302
Exh. Duration @ .050 in. (Deg)214
Exh. Duration Advertised (Deg)280
Exhaust Valve Lift0.472 in.
Intake Duration @ 0.050 in.204 Degree
Intake Duration Advertised270
Intake Valve Lift0.448 in.
Lifter TypeHydraulic Flat Tappet
RPM Range0-6750
UsageStreet/Performance
WARNING CA Proposition 65Yes
WARNING CA Proposition 65 MessageWARNING: Cancer and Reproductive Harm P65Warnings.ca.gov

DOWNLOADS:

WARRANTY TIME: 12 Months

Product type:
Aftermarket
Features and Benefits:
Edelbrock Performer-Plus Camshaft #2122 is designed for 289-302 Ford V8 engines and produces optimum torque from the low-end to the mid-range. Performer-Plus camshafts should be matched with Performer manifolds for vehicles operating from off-idle to
Features and Benefits:
Includes Hydraulic Lifters and Assembly Lube
Features and Benefits:
Major Improvement in Throttle Response and Torque
Features and Benefits:
Use For Daily Drivers/Trucks/Vans/RVs/4x4s
Features and Benefits:
Take the Guesswork Out of Camshaft Selection!
Features and Benefits:
Designed for Optimum Torque and Acceleration
Features and Benefits:
Maximum Performance From Idle through Mid-Range
Features and Benefits:
Matched to Edelbrock Performer Intakes
Brand Description:
Performer-Plus Camshaft Kit
Product Description:
Performer-Plus Camshaft Kit for Small-Block Ford 289-302 V8
Short Description:
CAMSHAFTS
Hazardous Material:
No
Minimum Order Quantity:
1
Item Level GTIN:
00085347021222
Quantity Per Application:
1



Need help? We're available at1-321-400-8080 - Email us atinfo@partsonnet.net orlive help
to top