×
close

Shopping Cart:

Toggle menu
1-321-400-8080

24/7 Customer Service
0

$0.00

0
Edelbrock 2132 | Engine Camshaft and Lifter Kit
click to zoom in

Edelbrock 2132 | Engine Camshaft and Lifter Kit

(No reviews yet) Write a Review
$353.95
Part Number
EDE2132
UPC:
85347021321
Condition:
New
5 customers are viewing this product

video gallery

Description

Edelbrock Performer-Plus Camshaft #2132 is designed for 290-401 AMC V8 engines and produce optimum torque from the low-end to the mid-range. Performer-Plus camshafts should be matched with Performer manifolds for vehicles operating from off-idle to 5500 rpm. The Performer-Plus #2132 is a smooth idling cam for daily drivers, trucks, vans, RVs and 4x4s. You can expect a major improvement in throttle response and torque. In the manifold section you'll find torque graphs showing the power gains from Performer manifolds and Performer-Plus cams. All camshafts include flat tappet lifters (except for cams designed for use with stock roller lifters), assembly lube and instructions. This cam produced 275 Ft Lbs of Torque when paired with Performer AMC intake manifold #2131 and stock cylinder heads.Camshaft specifications:- Intake duration: 204 Degrees- Exhaust duration: 214 Degrees- Intake lift: .448"- Exhaust lift: .472"- Lobe separation: 110 Degree- Intake Center Line: 105 Degree- Vacuum: 15"

BRAND: Edelbrock

FEATURES:

  • Use For Daily Drivers/Trucks/Vans/RVs/4x4s
  • Includes Hydraulic Lifters and Assembly Lube
  • AMC:Small-Block:290 (4.8L)/304 (5.0L)/360 (5.9L)/390 (6.4L)/401 (6.6L)
  • Major Improvement in Throttle Response and Torque
  • Maximum Performance From Idle through Mid-Range
  • Take the Guesswork Out of Camshaft Selection!
  • 21461; Buick; Big-Block; Edelbrock; Intake Manifold; Intake; Manifold; Dual-Plane; Single-Plane; Tunnel-Ram; Cross-Ram; Performer; Performer RPM; Victor JR.; Super Victor; Victor; Dual-Quad; Slingshot; Polished
  • Recommended Valve Springs for OEM heads: Edelbrock part #5832 non-rotator/# 5932 Rotator; In order for this Performer-Plus cam and lifter kit to be covered under ANY WARRANTY you must use either the correct Edelbrock Sure Seat valve springs or the stock o
  • Cam Lift kt
  • Performer-Plus Camshaft Kit
  • Matched To Performer Intakes PN[2131/3731]
  • Edelbrock Performer-Plus Camshaft Kit for AMC 290-401 V8
  • Performer-Plus Camshaft Kit for AMC 290-401 V8.
  • { eo : 5in.}
  • Designed for Optimum Torque and Acceleration
  • CAMSHAFTS

SPECIFICS:

Engine Make/SizeAMC 290-401
Exh. Duration @ .050 in. (Deg)214
Exh. Duration Advertised (Deg)288
Exhaust Valve Lift0.472 in.
Intake Duration @ 0.050 in.204 Degree
Intake Duration Advertised278
Intake Valve Lift0.448 in.
Lifter TypeHydraulic Flat Tappet
RPM Range0-6750
UsageStreet/Performance
WARNING CA Proposition 65Yes
WARNING CA Proposition 65 MessageWARNING: This product can expose you to Chromium; which is known to the State of California to cause cancer or birth defects or other reproductive harm. For more information; visit www.P65warnings.ca.gov.

Off-Idle to -5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.448/0.472 in.; Lobe Seps 110 Deg.; Intake Center Line 105 Deg.;Engines Transplanted Into Uncontrolled/Pre-Pollution VehicleDesigned For The Engine Swap Market~Idle Vacuum at 1000 RPM - 15 inch~Not Legal For Use On Pollution Controlled Vehicles~Produces 275 ft.-lbs. When Matched w/2131 Intake and Stock Heads

DOWNLOADS:

WARRANTY TIME: 12 Months

APPLICATIONS:

  • 1969-1969 American Motors Rambler
  • 1972-1975 Jeep CJ6
  • 1967-1967 American Motors Marlin
  • 1972-1981 Jeep CJ5
  • 1972-1972 Jeep Commando
  • 1967-1968 American Motors American
  • 1968-1970 American Motors AMX
  • 1974-1988 Jeep J20
  • 1968-1974 American Motors Javelin
  • 1972-1973 Jeep J-4800
  • 1970-1977 American Motors Hornet
  • 1972-1983 Jeep Wagoneer
  • 1974-1988 Jeep J10
  • 1984-1991 Jeep Grand Wagoneer
  • 1972-1973 Jeep J-2500
  • 1972-1976 American Motors Gremlin
  • 1967-1970 American Motors Rebel
  • 1976-1981 Jeep CJ7
  • 1978-1979 American Motors AMX
  • 1974-1983 Jeep Cherokee
  • 1979-1979 American Motors Spirit
  • 1972-1973 Jeep J-2600
  • 1967-1974 American Motors Ambassador
  • 1978-1979 American Motors Pacer
  • 1978-1979 American Motors Concord
  • 1971-1978 American Motors Matador

Attributes
Product type:
Aftermarket
Features and Benefits:
Edelbrock Performer-Plus Camshaft #2132 is designed for 290-401 AMC V8 engines and produce optimum torque from the low-end to the mid-range. Performer-Plus camshafts should be matched with Performer manifolds for vehicles operating from off-idle to 5
Features and Benefits:
Maximum Performance From Idle through Mid-Range
Features and Benefits:
Matched To Performer Intakes PN[2131/3731]
Features and Benefits:
Includes Hydraulic Lifters and Assembly Lube
Features and Benefits:
Designed for Optimum Torque and Acceleration
Features and Benefits:
Major Improvement in Throttle Response and Torque
Features and Benefits:
Use For Daily Drivers/Trucks/Vans/RVs/4x4s
Features and Benefits:
Take the Guesswork Out of Camshaft Selection!
Brand Description:
Performer-Plus Camshaft Kit
Product Description:
Performer-Plus Camshaft Kit for AMC 290-401 V8.
Short Description:
CAMSHAFTS
Hazardous Material:
No
Minimum Order Quantity:
1
Item Level GTIN:
00085347021321
Quantity Per Application:
1



Need help? We're available at1-321-400-8080 - Email us atinfo@partsonnet.net orlive help
to top