×
close

Shopping Cart:

Toggle menu
1-321-400-8080

24/7 Customer Service
0

$0.00

0
Edelbrock 2157 | Engine Camshaft and Lifter Kit
click to zoom in

Edelbrock 2157 | Engine Camshaft and Lifter Kit

(No reviews yet) Write a Review
$370.29
Part Number
EDE2157
UPC:
85347021574
Condition:
New
5 customers are viewing this product

video gallery

Description

Edelbrock Performer-Plus Camshaft #2157 is designed for 350-455 Pontiac V8 engines and produce optimum torque from the low-end to the mid-range. Performer-Plus camshafts should be matched with Performer manifolds for vehicles operating from off-idle to 5500 rpm. The Performer-Plus #2157 is a smooth idling cam for daily drivers, trucks, vans, RVs and 4x4s. You can expect a major improvement in throttle response and torque. In the manifold section you'll find torque graphs showing the power gains from Performer manifolds and Performer-Plus cams. All camshafts include flat tappet lifters (except for cams designed for use with stock roller lifters), assembly lube and instructions. This cam produced 387HP and 439 Ft Lbs of Torque when paired with Performer intake manifold #2156 and Performer RPM cylinder heads #60599.Camshaft specifications:- Intake duration: 204 Degrees- Exhaust duration: 214 Degrees- Intake lift: .420"- Exhaust lift: .442"- Lobe separation: 110 Degree- Intake Center Line: 105 Degree- Vacuum: 15"

BRAND: Edelbrock

FEATURES:

  • Performer-Plus Camshaft Kit
  • Designed for Optimum Torque and Acceleration
  • 21611; Chevy; Chevrolet; Edelbrock; Intake Manifold; Intake; Manifold; Dual-Plane; Single-Plane; Tunnel-Ram; Cross-Ram; Performer; Performer RPM; Victor JR.; Super Victor; Victor; Dual-Quad; Slingshot; Polished
  • Pontiac:-:326 (5.3L)/350 (5.7L)/389 (6.4L)/400 (6.6L)/421 (6.9L)/428 (7.0L)/455 (7.4)
  • Performer-Plus Camshaft Kit for Pontiac 350-403 V8
  • Take the Guesswork Out of Camshaft Selection!
  • Use For Daily Drivers/Trucks/Vans/RVs/4x4s
  • CAMSHAFTS
  • Cam Lift kt
  • { eo : 7in.}
  • Includes Hydraulic Lifters and Assembly Lube
  • Matched to Edelbrock Performer Intakes
  • Maximum Performance From Idle through Mid-Range
  • Edelbrock Performer-Plus Camshaft Kit for Pontiac 350-403 V8
  • Recommended Valve Springs for OEM heads: Edelbrock part #5857 non-rotator; In order for this Performer-Plus cam and lifter kit to be covered under ANY WARRANTY you must use either the correct Edelbrock Sure Seat valve springs or the stock original equipme
  • Major Improvement in Throttle Response and Torque

SPECIFICS:

Engine Make/SizePontiac 326-455
Exh. Duration @ .050 in. (Deg)214
Exh. Duration Advertised (Deg)288
Exhaust Valve Lift0.442 in.
Intake Duration @ 0.050 in.204 Degree
Intake Duration Advertised278
Intake Valve Lift0.420 in.
Lifter TypeHydraulic Flat Tappet
RPM Range0-6750
UsageStreet/Performance
WARNING CA Proposition 65Yes
WARNING CA Proposition 65 MessageWARNING: This product can expose you to Chromium; which is known to the State of California to cause cancer or birth defects or other reproductive harm. For more information; visit www.P65warnings.ca.gov.

Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Ext. 204/214 Deg.; Lift at Valve Int/Exh 0.420/0.442 in.; Lobe Seps 105 Deg. Intake Center Line 105 Deg.;Engines Transplanted Into Uncontrolled/Pre-Pollution VehicleFor Pre-Pollution Controlled Vehicles Or Engine Swaps~Idle Vacuum at 1000 RPM - 15 inch~Not Legal For Use On Pollution Controlled Vehicles~Produces 387hp and 439 ft.-lbs When Matched w/2156 Intake and 60559 Heads

DOWNLOADS:

WARRANTY TIME: 12 Months

APPLICATIONS:

  • 1971-1975 Pontiac Grandville
  • 1958-1958 Pontiac Super Chief
  • 1966-1974 Pontiac Parisienne
  • 1967-1979 Pontiac Firebird
  • 1972-1975 Pontiac Ventura
  • 1975-1975 Oldsmobile Delta 88
  • 1958-1966 Pontiac Star Chief
  • 1968-1977 Pontiac LeMans
  • 1964-1973 Pontiac GTO
  • 1976-1976 Pontiac Parisienne
  • 1971-1978 Pontiac Grand Safari
  • 1958-1978 Pontiac Catalina
  • 1968-1970 Pontiac Tempest
  • 1975-1975 Oldsmobile Custom Cruiser
  • 1973-1975 Pontiac Grand Am
  • 1958-1958 Pontiac Chieftain
  • 1958-1978 Pontiac Bonneville
  • 1975-1975 Oldsmobile 98
  • 1984-1984 GMC G3500
  • 1967-1970 Pontiac Executive
  • 1962-1977 Pontiac Grand Prix
  • 1975-1975 Buick LeSabre
  • 1966-1974 Pontiac Laurentian
  • 1961-1961 Pontiac Tempest
  • 1966-1970 Pontiac Strato-Chief
  • 1960-1961 Pontiac Ventura
  • 1975-1977 Pontiac Grand LeMans
  • 1970-1971 Pontiac Acadian
  • 1976-1976 Pontiac Laurentian

Attributes
Product type:
Aftermarket
Features and Benefits:
Edelbrock Performer-Plus Camshaft #2157 is designed for 350-455 Pontiac V8 engines and produce optimum torque from the low-end to the mid-range. Performer-Plus camshafts should be matched with Performer manifolds for vehicles operating from off-idle
Features and Benefits:
Take the Guesswork Out of Camshaft Selection!
Features and Benefits:
Designed for Optimum Torque and Acceleration
Features and Benefits:
Maximum Performance From Idle through Mid-Range
Features and Benefits:
Matched to Edelbrock Performer Intakes
Features and Benefits:
Includes Hydraulic Lifters and Assembly Lube
Features and Benefits:
Major Improvement in Throttle Response and Torque
Features and Benefits:
Use For Daily Drivers/Trucks/Vans/RVs/4x4s
Brand Description:
Performer-Plus Camshaft Kit
Product Description:
Performer-Plus Camshaft Kit for Pontiac 350-403 V8
Short Description:
CAMSHAFTS
Hazardous Material:
No
Minimum Order Quantity:
1
Item Level GTIN:
00085347021574
Quantity Per Application:
1



Need help? We're available at1-321-400-8080 - Email us atinfo@partsonnet.net orlive help
to top