×
close

Shopping Cart:

Toggle menu
1-321-400-8080

24/7 Customer Service
0

$0.00

0
Edelbrock 2167 | Engine Camshaft and Lifter Kit
click to zoom in

Edelbrock 2167 | Engine Camshaft and Lifter Kit

(No reviews yet) Write a Review
$368.95
Part Number
EDE2167
UPC:
85347021673
Condition:
New
5 customers are viewing this product

video gallery

Description

Edelbrock Performer-Plus Camshaft #2167 is designed for 429-460 Ford V8 engines and produce optimum torque from the low-end to the mid-range. Performer-Plus camshafts should be matched with Performer manifolds for vehicles operating from off-idle to 5500 rpm. The Performer-Plus #2167 is a smooth idling cam for daily drivers, trucks, vans, RVs and 4x4s. You can expect a major improvement in throttle response and torque. In the manifold section you'll find torque graphs showing the power gains from Performer manifolds and Performer-Plus cams. All camshafts include flat tappet lifters (except for cams designed for use with stock roller lifters), assembly lube and instructions. This cam produced 455 Ft Lbs of Torque when paired with Performer intake manifold #2166 and stock cylinder heads.Camshaft specifications:- Intake duration: 194 Degrees- Exhaust duration: 204 Degrees- Intake lift: .460"- Exhaust lift: .480"- Lobe separation: 110 Degree- Intake Center Line: 105 Degree- Vacuum: 15"

BRAND: Edelbrock

FEATURES:

  • CAMSHAFTS
  • Major Improvement in Throttle Response and Torque
  • Use For Daily Drivers/Trucks/Vans/RVs/4x4s
  • { eo : 5in.}
  • Ford:Big-Block:429 (7.0L )/460 (7.5L)
  • Designed for Optimum Torque and Acceleration
  • Matched to Edelbrock Performer Intakes
  • Take the Guesswork Out of Camshaft Selection!
  • Edelbrock Performer-Plus Camshaft Kit for Big-Block Ford 429/460 V8
  • Recommended Valve Springs for OEM heads: Edelbrock part #5867 non-rotator; In order for this Performer-Plus cam and lifter kit to be covered under ANY WARRANTY you must use either the correct Edelbrock Sure Seat valve springs or the stock original equipme
  • Performer-Plus Camshaft Kit for Big-Block Ford 429/460 V8
  • Maximum Performance From Idle through Mid-Range
  • Cam Lift kt
  • Performer-Plus Camshaft Kit
  • Includes Hydraulic Lifters and Assembly Lube
  • 21711; Ford; Edelbrock; Intake Manifold; Intake; Manifold; Dual-Plane; Single-Plane; Tunnel-Ram; Cross-Ram; Performer; Performer RPM; Victor JR.; Super Victor; Victor; Dual-Quad; Slingshot; Polished

SPECIFICS:

Engine Make/SizeFord 429-460
Exh. Duration @ .050 in. (Deg)204
Exh. Duration Advertised (Deg)282
Exhaust Valve Lift0.480 in.
Intake Duration @ 0.050 in.194 Degree
Intake Duration Advertised272
Intake Valve Lift0.460 in.
Lifter TypeHydraulic Flat Tappet
RPM Range0-6750
UsageStreet/Performance
WARNING CA Proposition 65Yes
WARNING CA Proposition 65 MessageWARNING: This product can expose you to Chromium; which is known to the State of California to cause cancer or birth defects or other reproductive harm. For more information; visit www.P65warnings.ca.gov.

Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 194/204 Deg.; Lift at Valve Int/Exh 0.460/0.480 in.; Lobe Seps 110 Deg.; Intake Center Line 105 Deg.;Engines Transplanted Into Uncontrolled/Pre-Pollution VehicleDesigned For The Engine Swap Market~Idle Vacuum at 1000 RPM - 15 inch~Not Legal For Use On Pollution Controlled Vehicles~Produces 455 ft.-lbs. When Matched w/2166 Intake and Stock Heads

DOWNLOADS:

WARRANTY TIME: 12 Months

APPLICATIONS:

  • 1975-1996 Ford E-350 Econoline
  • 1983-1996 Ford F-250
  • 1975-1980 Ford E-250 Econoline
  • 1969-1972 Ford Custom
  • 1969-1978 Ford LTD
  • 1970-1970 Ford Fairlane
  • 1970-1976 Ford Torino
  • 1996-1996 Ford Econoline Super Duty
  • 1969-1971 Mercury Cyclone
  • 1969-1978 Mercury Marquis
  • 1972-1976 Lincoln Mark IV
  • 1969-1974 Ford Country Sedan
  • 1969-1974 Ford Country Squire
  • 1983-1997 Ford F-350
  • 1975-1978 Mercury Grand Marquis
  • 1977-1996 Ford E-350 Econoline Club Wagon
  • 1975-1976 Ford Elite
  • 1973-1979 Ford F-350
  • 1973-1979 Ford F-250
  • 1969-1970 Mercury Marauder
  • 1975-1991 Ford E-250 Econoline Club Wagon
  • 1969-1974 Mercury Monterey
  • 1978-1978 Ford E-100 Econoline
  • 1970-1977 Ford Ranchero
  • 1997-1997 Ford F-250 HD
  • 1975-1979 Ford F-150
  • 1977-1978 Lincoln Mark V
  • 1969-1974 Ford Ranch Wagon
  • 1968-1971 Lincoln Mark III
  • 1970-1971 Ford Mustang
  • 1979-1979 Ford F-100
  • 1969-1974 Ford Galaxie 500
  • 1969-1974 Mercury Colony Park
  • 1969-1976 Ford Custom 500
  • 1968-1976 Ford Thunderbird
  • 1973-1974 Ford F-100
  • 1968-1978 Lincoln Continental
  • 1973-1976 Mercury Cougar
  • 1970-1970 Ford Falcon
  • 1970-1971 Mercury Cougar
  • 1972-1976 Ford Gran Torino
  • 1970-1976 Mercury Montego

Attributes
Product type:
Aftermarket
Features and Benefits:
Edelbrock Performer-Plus Camshaft #2167 is designed for 429-460 Ford V8 engines and produce optimum torque from the low-end to the mid-range. Performer-Plus camshafts should be matched with Performer manifolds for vehicles operating from off-idle to
Features and Benefits:
Matched to Edelbrock Performer Intakes
Features and Benefits:
Includes Hydraulic Lifters and Assembly Lube
Features and Benefits:
Major Improvement in Throttle Response and Torque
Features and Benefits:
Use For Daily Drivers/Trucks/Vans/RVs/4x4s
Features and Benefits:
Take the Guesswork Out of Camshaft Selection!
Features and Benefits:
Designed for Optimum Torque and Acceleration
Features and Benefits:
Maximum Performance From Idle through Mid-Range
Brand Description:
Performer-Plus Camshaft Kit
Product Description:
Performer-Plus Camshaft Kit for Big-Block Ford 429/460 V8
Short Description:
CAMSHAFTS
Hazardous Material:
No
Minimum Order Quantity:
1
Item Level GTIN:
00085347021673
Quantity Per Application:
1



Need help? We're available at1-321-400-8080 - Email us atinfo@partsonnet.net orlive help
to top