Edelbrock part #2182 Performer-Plus camshaft is designed for small-block Ford 351W V-8 applications. This Edelbrock cam kit produced 325 ft-lbs. of torque when used with #2181 intake and stock iron cylinder heads on a 351W engine. The camshaft will produce optimum torque from the low-end to the mid-range, Performer-Plus camshafts match with Performer manifolds for vehicles operating from off-idle to 5500 rpm. This Performer-Plus is a smooth idling cam for daily drivers, trucks, vans, RVs and 4x4s. You can expect a major improvement in throttle response and torque. All camshafts include flat tappet lifters, assembly lube and instructions.Camshaft Specifications:- Duration @ .050 Intake: 204 degrees - Duration @ .050 Exhaust: 214 degrees- Lift @ Valve Intake: .448"- Lift @ Valve Exhaust: .472"- Lobe Separation: 112 Degrees- Intake Centerline: 107 Degrees- Idle Vacuum @ 1000 RPM's: 15"
| Engine Make/Size | Ford 5.8L/351W |
| Exh. Duration @ .050 in. (Deg) | 214 |
| Exh. Duration Advertised (Deg) | 280 |
| Exhaust Valve Lift | 0.472 in. |
| Intake Duration @ 0.050 in. | 204 Degree |
| Intake Duration Advertised | 270 |
| Intake Valve Lift | 0.448 in. |
| Lifter Type | Hydraulic Flat Tappet |
| RPM Range | 0-6750 |
| Usage | Street/Performance |
| WARNING CA Proposition 65 | Yes |
| WARNING CA Proposition 65 Message | WARNING: This product can expose you to Chromium; which is known to the State of California to cause cancer or birth defects or other reproductive harm. For more information; visit www.P65warnings.ca.gov. |
Edelbrock
Edelbrock Performer-Plus Camshaft #2167 is designed for 429-460 Ford V8 engines and produce optimum torque from the low-end to the mid-range. Performer-Plus camshafts should be matched with Performer...
Edelbrock
Edelbrock part #2172 Performer-Plus camshaft is designed for Ford 351M-400 V-8 applications. This Edelbrock cam kit produced 390 ft-lbs. of torque when used with #2171 intake and stock iron cylinder...
Edelbrock
Edelbrock Performer-Plus Camshaft #2122 is designed for 289-302 Ford V8 engines and produces optimum torque from the low-end to the mid-range. Performer-Plus camshafts should be matched with...
Edelbrock
Edelbrock part #7162 Performer RPM Camshaft is designed for big-block Chevy 396-427-454 V-8 applications. This Edelbrock cam kit produced 540 HP & 530 ft-lbs. of torque when used with #7163...
Edelbrock
Edelbrock part #7157 Performer RPM Camshaft is designed for Pontiac 350-455 V-8 applications. This Edelbrock cam kit produced 422 HP & 441 ft-lbs. of torque when used with #7156 intake and #60599...
