×
close

Shopping Cart:

Toggle menu
1-321-400-8080

24/7 Customer Service
0

$0.00

0
Edelbrock 2192 | Engine Camshaft and Lifter Kit
click to zoom in

Edelbrock 2192 | Engine Camshaft and Lifter Kit

(No reviews yet) Write a Review
$433.26
Part Number
EDE2192
UPC:
85347021925
Condition:
New
5 customers are viewing this product

video gallery

Description

Edelbrock part #2192 Performer-Plus camshaft is designed for 1968 and later big-block Chrysler 383-400-440 V-8 applications. This Edelbrock cam kit produced 427 ft-lbs. of torque when used with #2191 intake and stock iron cylinder heads on a 440 engine. The camshaft will produce optimum torque from the low-end to the mid-range, Performer-Plus camshafts match with Performer manifolds for vehicles operating from off-idle to 5500 rpm. This Performer-Plus is a smooth idling cam for daily drivers, trucks, vans, RVs and 4x4s. You can expect a major improvement in throttle response and torque. All camshafts include flat tappet lifters, assembly lube and instructions.Camshaft Specifications:- Duration @ .050 Intake: 204 degrees - Duration @ .050 Exhaust: 214 degrees- Lift @ Valve Intake: .420"- Lift @ Valve Exhaust: .442"- Lobe Separation: 112 Degrees- Intake Centerline: 107 Degrees- Idle Vacuum @ 1000 RPM's: 14"

BRAND: Edelbrock

FEATURES:

  • Cam Lift kit
  • Performer-Plus Camshaft Kit for Big-Block Chrysler 383-400-440 V8
  • Take the Guesswork Out of Camshaft Selection!
  • Designed for Optimum Torque and Acceleration
  • Maximum Performance From Idle through Mid-Range
  • Performer-Plus Camshaft Kit
  • Edelbrock Performer-Plus camshaft for Big-Block Chrysler 383-400-440 V-8
  • Recommended Valve Springs for OEM heads: Edelbrock part #5892 non-rotator/# 5992 Rotator; For 1968 and later.; Camshaft utilizes one bolt configuration.; In order for this Performer-Plus cam and lifter kit to be covered under ANY WARRANTY you must use eit
  • Includes Hydraulic Lifters and Assembly Lube
  • Matched to Edelbrock Performer Intakes
  • 21944; Holden; Edelbrock; Intake Manifold; Intake; Manifold; Dual-Plane; Performer; Endurashine
  • CAMSHAFTS
  • Chrysler:Big-Block RB-Series:413 (6.8L)/426 (7.0L)/440 (7.2L)
  • Major Improvement in Throttle Response and Torque
  • Use For Daily Drivers/Trucks/Vans/RVs/4x4s
  • { eo : 5in.}

SPECIFICS:

Engine Make/SizeMopar 361-400
Exh. Duration @ .050 in. (Deg)214
Exh. Duration Advertised (Deg)280
Exhaust Valve Lift0.442 in.
Intake Duration @ 0.050 in.204 Degree
Intake Duration Advertised270
Intake Valve Lift0.420 in.
Lifter TypeHydraulic Flat Tappet
RPM Range0-6750
UsageStreet/Performance
WARNING CA Proposition 65Yes
WARNING CA Proposition 65 MessageWARNING: This product can expose you to Chromium; which is known to the State of California to cause cancer or birth defects or other reproductive harm. For more information; visit www.P65warnings.ca.gov.

Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.420/0.442 in.; Lobe Seps 112 Deg; Intake Center Line 107 Deg;Engines Transplanted Into Uncontrolled/Pre-Pollution VehicleCamshaft Utilizes One Bolt Configuration~Designed For The Engine Swap Market~Idle Vacuum at 1000 RPM - 14 inch~Not Legal For Use On Pollution Controlled Vehicles~Produces 427 ft.-lbs. When Matched w/2191 Intake and Stock Heads

DOWNLOADS:

WARRANTY TIME: 12 Months

APPLICATIONS:

  • 1969-1971 Dodge W200 Pickup
  • 1968-1974 Plymouth Fury I
  • 1970-1971 Plymouth Cuda
  • 1974-1974 Dodge W100 Pickup
  • 1968-1978 Plymouth Fury
  • 1975-1978 Chrysler Cordoba
  • 1976-1978 Plymouth PB300
  • 1975-1978 Dodge D200
  • 1974-1974 Dodge B100 Van
  • 1972-1977 Plymouth Gran Fury
  • 1968-1974 Dodge D200 Pickup
  • 1970-1971 Dodge Challenger
  • 1968-1978 Dodge Charger
  • 1971-1971 Dodge W300 Pickup
  • 1976-1979 Dodge CB300
  • 1975-1978 Dodge D300
  • 1978-1978 Dodge Magnum
  • 1971-1971 Dodge B200 Van
  • 1968-1971 Plymouth GTX
  • 1975-1977 Dodge Royal Monaco
  • 1977-1978 Dodge W150
  • 1974-1978 Plymouth Trailduster
  • 1968-1970 Plymouth Belvedere
  • 1968-1975 Chrysler Imperial
  • 1968-1978 Dodge Monaco
  • 1975-1978 Dodge W200
  • 1974-1974 Dodge W200 Pickup
  • 1975-1977 Dodge W100
  • 1975-1975 Dodge W300
  • 1968-1975 Plymouth Road Runner
  • 1968-1973 Dodge Polara
  • 1968-1978 Chrysler New Yorker
  • 1968-1974 Plymouth Satellite
  • 1968-1969 Dodge W300 Pickup
  • 1968-1974 Plymouth Fury II
  • 1974-1974 Dodge B200 Van
  • 1968-1978 Chrysler Newport
  • 1975-1978 Dodge D100
  • 1976-1978 Plymouth PB200
  • 1968-1976 Dodge Coronet
  • 1968-1971 Chrysler 300
  • 1970-1970 Plymouth Superbird
  • 1968-1974 Dodge D100 Pickup
  • 1968-1974 Dodge D300 Pickup
  • 1968-1971 Dodge W100 Pickup
  • 1974-1978 Dodge Ramcharger
  • 1977-1978 Dodge D150
  • 1968-1977 Chrysler Town & Country
  • 1968-1974 Plymouth Fury III
  • 1975-1978 Dodge B200
  • 1975-1978 Dodge B300
  • 1968-1971 Plymouth Barracuda
  • 1968-1968 Dodge Dart

Attributes
Product type:
Aftermarket
Features and Benefits:
Edelbrock part #2192 Performer-Plus camshaft is designed for 1968 and later big-block Chrysler 383-400-440 V-8 applications. This Edelbrock cam kit produced 427 ft-lbs. of torque when used with #2191 intake and stock iron cylinder heads on a 440 engi
Features and Benefits:
Includes Hydraulic Lifters and Assembly Lube
Features and Benefits:
Major Improvement in Throttle Response and Torque
Features and Benefits:
Use For Daily Drivers/Trucks/Vans/RVs/4x4s
Features and Benefits:
Take the Guesswork Out of Camshaft Selection!
Features and Benefits:
Designed for Optimum Torque and Acceleration
Features and Benefits:
Maximum Performance From Idle through Mid-Range
Features and Benefits:
Matched to Edelbrock Performer Intakes
Brand Description:
Performer-Plus Camshaft Kit
Product Description:
Performer-Plus Camshaft Kit for Big-Block Chrysler 383-400-440 V8
Short Description:
CAMSHAFTS
Hazardous Material:
No
Minimum Order Quantity:
1
Item Level GTIN:
00085347021925
Quantity Per Application:
1



Need help? We're available at1-321-400-8080 - Email us atinfo@partsonnet.net orlive help
to top