Edelbrock Rollin' Thunder Camshaft #2264 is designed for 500+ Gen VI engines from 1996-Later and produce optimum torque from the low-end to the mid-range. Rollin' Thunder camshafts match with Performer manifolds for vehicles operating from off-idle to 5500 rpm. They are smooth idling cams for daily drivers, trucks, vans, RVs and 4x4s. You can expect a major improvement in throttle response and torque. In the manifold section you'll find torque graphs showing the power gains from Performer manifolds and Performer-Plus cams. All camshafts include flat tappet lifters (except for cams designed for use with stock roller lifters), assembly lube and instructions. This cam produced 723HP and 652 Ft Lbs of Torque when paired with Pro-Flo XT EFI system #3558 and E-CNC cylinder heads #79555. Must use a high stall torque converter.Camshaft specifications:- Intake duration: 248 Degrees- Exhaust duration: 256 Degrees- Intake lift: .632"- Exhaust lift: .648"- Lobe separation: 112 Degree- Intake Center Line: N/A- Vacuum: 11"
| Engine Make/Size | Chevy Big Block Mark IV |
| Exh. Duration @ .050 in. (Deg) | 256 |
| Exh. Duration Advertised (Deg) | 315 |
| Exhaust Valve Lift | 0.643 in. |
| Intake Duration @ 0.050 in. | 248 Degree |
| Intake Duration Advertised | 308 |
| Intake Valve Lift | 0.629 in. |
| Lifter Type | Hydraulic Roller |
| RPM Range | 1500-6500 |
| Usage | Street/Performance |
| WARNING CA Proposition 65 | Yes |
| WARNING CA Proposition 65 Message | WARNING: This product can expose you to Chromium; which is known to the State of California to cause cancer or birth defects or other reproductive harm. For more information; visit www.P65warnings.ca.gov. |
Edelbrock
Edelbrock Rollin' Thunder Camshaft #2204 is designed for 283-400 Chevy V8 engines from 1987-Later (Non LT1/Gen III) and produces optimum torque from the low-end to the mid-range. Rollin' Thunder...
Edelbrock
Edelbrock Rollin' Thunder Camshaft #2201 is designed for 283-400 V8 Chevy engines from 1957-1986 and produces optimum torque from the low-end to the mid-range. Rollin' Thunder camshafts should be...
Edelbrock
Edelbrock Rollin' Thunder Camshaft #2281 is designed for 351W Ford V8 engines and produce optimum torque from the low-end to the mid-range. Rollin' Thunder camshafts match with Performer manifolds...
Edelbrock
Edelbrock Rollin' Thunder Camshaft #3714 is designed for 4.3L 90 Degree V6 Chevy engines and produce optimum torque from the low-end to the mid-range. Rollin' Thunder camshafts match with Performer...
Edelbrock
Edelbrock Rollin' Thunder Camshaft #2262 is designed for 454-502 V8 Gen VI engines from 1996-Later and produce optimum torque from the low-end to the mid-range. Rollin' Thunder camshafts match with...
