×
close
click to zoom in

Edelbrock 3712 | Engine Camshaft and Lifter Kit

(No reviews yet) Write a Review
$366.09
Part Number
EDE3712
UPC:
85347037124
Condition:
New
5 customers are viewing this product

Edelbrock part #3712 Performer-Plus camshaft is designed for small-block Oldsmobile 350-403 V-8 applications. This Edelbrock cam kit produced 330 ft-lbs. of torque when used with #3711 intake and stock iron cylinder heads on a 350 engine. The camshaft will produce optimum torque from the low-end to the mid-range, Performer-Plus camshafts match with Performer manifolds for vehicles operating from off-idle to 5500 rpm. This Performer-Plus is a smooth idling cam for daily drivers, trucks, vans, RVs and 4x4s. You can expect a major improvement in throttle response and torque. All camshafts include flat tappet lifters, assembly lube and instructions.Camshaft Specifications:- Duration @ .050 Intake: 204 degrees - Duration @ .050 Exhaust: 214 degrees- Lift @ Valve Intake: .449"- Lift @ Valve Exhaust: .473"- Lobe Separation: 114 Degrees- Intake Centerline: 106 Degrees- Idle Vacuum @ 1000 RPM's: 16"

BRAND: Edelbrock

FEATURES:

  • Matched to Edelbrock Performer Intakes
  • Maximum Performance From Idle through Mid-Range
  • CAMSHAFTS
  • 37131; Chevy; Chevrolet; Edelbrock; Intake Manifold; Intake; Manifold; Dual-Plane; Single-Plane; Tunnel-Ram; Cross-Ram; Performer; Performer RPM; Victor JR.; Super Victor; Victor; Dual-Quad; Slingshot; Polished
  • Recommended Valve Springs for OEM heads: Edelbrock part #5812; May require longer than stock pushrods.; Will not fit 1966 earlier.; In order for this Performer-Plus cam and lifter kit to be covered under ANY WARRANTY you must use either the correct Edelb
  • Use For Daily Drivers/Trucks/Vans/RVs/4x4s
  • Take the Guesswork Out of Camshaft Selection!
  • Performer-Plus Camshaft Kit for Small-Block Oldsmobile 350-403 V8
  • Designed for Optimum Torque and Acceleration
  • Major Improvement in Throttle Response and Torque
  • Oldsmobile:Small-Block:350 (5.7L)/403 (6.6L)
  • Performer-Plus Camshaft Kit for Big-Block Oldsmobile 350-403 V8
  • { eo : 5in.}
  • Cam Lift kit
  • Performer-Plus Camshaft Kit
  • Includes Hydraulic Lifters and Assembly Lube

SPECIFICS:

Engine Make/SizeOlds 307-403
Exh. Duration @ .050 in. (Deg)214
Exh. Duration Advertised (Deg)290
Exhaust Valve Lift0.472 in.
Intake Duration @ 0.050 in.204 Degree
Intake Duration Advertised280
Intake Valve Lift0.448 in.
Lifter TypeHydraulic Flat Tappet
RPM Range0-6750
UsageStreet/Performance
WARNING CA Proposition 65Yes
WARNING CA Proposition 65 MessageWARNING: This product can expose you to Chromium; which is known to the State of California to cause cancer or birth defects or other reproductive harm. For more information; visit www.P65warnings.ca.gov.

Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.;Engines Transplanted Into Uncontrolled/Pre-Pollution VehicleDesigned For The Engine Swap Market~Idle Vacuum at 1000 RPM - 16 inch~May Require Longer Than Stock Pushrods~Not Legal For Use On Pollution Controlled Vehicles~Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads

DOWNLOADS:

WARRANTY TIME: 12 Months

APPLICATIONS:

  • 1977-1977 Pontiac Phoenix
  • 1973-1973 Buick Estate Wagon
  • 1972-1972 Chevrolet Townsman
  • 1972-1972 Buick Sportwagon
  • 1975-1977 Buick Skylark
  • 1972-1972 GMC C25/C2500 Suburban
  • 1977-1980 Buick Riviera
  • 1972-1972 Chevrolet K10 Suburban
  • 1966-1977 Oldsmobile Cutlass
  • 1972-1980 Buick LeSabre
  • 1972-1975 Chevrolet El Camino
  • 1972-1972 Chevrolet Brookwood
  • 1972-1972 Chevrolet C20 Suburban
  • 1972-1973 Chevrolet Chevelle
  • 1977-1978 Pontiac Grand Safari
  • 1968-1972 Oldsmobile F85
  • 1972-1975 Chevrolet Bel Air
  • 1973-1975 Buick Apollo
  • 1972-1975 Chevrolet Caprice
  • 1975-1977 Oldsmobile Cutlass Salon
  • 1972-1972 Chevrolet Kingswood
  • 1977-1980 Oldsmobile 98
  • 1977-1980 Buick Estate Wagon
  • 1975-1977 Pontiac Ventura
  • 1977-1980 Pontiac Bonneville
  • 1979-1979 Oldsmobile Cutlass Salon
  • 1972-1974 Pontiac Parisienne
  • 1977-1980 Buick Electra
  • 1972-1972 Chevrolet C30 Pickup
  • 1977-1980 Oldsmobile Toronado
  • 1972-1972 Chevrolet K30 Pickup
  • 1968-1968 Oldsmobile Delmont 88
  • 1972-1972 Chevrolet K10 Pickup
  • 1972-1972 GMC K35/K3500 Pickup
  • 1972-1972 Chevrolet G10 Van
  • 1980-1980 Pontiac Laurentian
  • 1972-1972 GMC K15/K1500 Pickup
  • 1973-1977 Buick Century
  • 1976-1976 Oldsmobile Cutlass Tiara
  • 1972-1972 Chevrolet C10 Pickup
  • 1972-1972 Chevrolet K20 Suburban
  • 1977-1977 Pontiac Laurentian
  • 1976-1980 Cadillac Seville
  • 1966-1966 Oldsmobile F85
  • 1975-1977 Pontiac Grand LeMans
  • 1973-1973 Buick Centurion
  • 1976-1977 Pontiac Grand Prix
  • 1979-1980 Cadillac Eldorado
  • 1972-1975 Chevrolet Impala
  • 1977-1980 Oldsmobile Custom Cruiser
  • 1977-1980 Pontiac Catalina
  • 1973-1975 Chevrolet Malibu
  • 1972-1972 GMC C15/C1500 Pickup
  • 1966-1969 Oldsmobile 442
  • 1972-1975 Chevrolet Camaro
  • 1975-1977 Pontiac LeMans
  • 1979-1980 Oldsmobile Cutlass Calais
  • 1972-1972 GMC K25/K2500 Pickup
  • 1972-1972 Buick Skylark
  • 1976-1979 Pontiac Firebird
  • 1968-1977 Oldsmobile Cutlass Supreme
  • 1973-1977 Oldsmobile Omega
  • 1973-1977 Buick Regal
  • 1979-1980 Oldsmobile Cutlass
  • 1972-1975 GMC Sprint
  • 1972-1972 GMC C15/C1500 Suburban
  • 1973-1975 Chevrolet Laguna
  • 1972-1972 GMC C25/C2500 Pickup
  • 1972-1972 Chevrolet G20 Van
  • 1972-1975 Chevrolet Monte Carlo
  • 1972-1972 GMC C35/C3500 Pickup
  • 1975-1975 Pontiac Grand Am
  • 1968-1975 Oldsmobile Vista Cruiser
  • 1968-1980 Oldsmobile Delta 88
  • 1980-1980 Oldsmobile Cutlass Cruiser
  • 1972-1972 Chevrolet G30 Van
  • 1979-1980 Oldsmobile Cutlass Supreme
  • 1972-1972 GMC K25/K2500 Suburban
  • 1972-1972 Buick GS
  • 1972-1975 Chevrolet Nova
  • 1972-1974 Pontiac Laurentian
  • 1972-1972 Chevrolet Biscayne
  • 1972-1972 Chevrolet K20 Pickup

Product type:
Aftermarket
Features and Benefits:
Edelbrock part #3712 Performer-Plus camshaft is designed for small-block Oldsmobile 350-403 V-8 applications. This Edelbrock cam kit produced 330 ft-lbs. of torque when used with #3711 intake and stock iron cylinder heads on a 350 engine. The camshaf
Features and Benefits:
Maximum Performance From Idle through Mid-Range
Features and Benefits:
Matched to Edelbrock Performer Intakes
Features and Benefits:
Includes Hydraulic Lifters and Assembly Lube
Features and Benefits:
Major Improvement in Throttle Response and Torque
Features and Benefits:
Use For Daily Drivers/Trucks/Vans/RVs/4x4s
Features and Benefits:
Take the Guesswork Out of Camshaft Selection!
Features and Benefits:
Designed for Optimum Torque and Acceleration
Brand Description:
Performer-Plus Camshaft Kit
Product Description:
Performer-Plus Camshaft Kit for Big-Block Oldsmobile 350-403 V8
Short Description:
CAMSHAFTS
Hazardous Material:
No
Minimum Order Quantity:
1
Item Level GTIN:
00085347037124
Quantity Per Application:
1



Need help? We're available at1-321-400-8080 - Email us atinfo@partsonnet.net orlive help
to top