×
close

Shopping Cart:

Toggle menu
1-321-400-8080

24/7 Customer Service
0

$0.00

0
Edelbrock 3714 | Engine Camshaft
click to zoom in

Edelbrock 3714 | Engine Camshaft

(No reviews yet) Write a Review
$528.95
Part Number
EDE3714
UPC:
85347037148
Condition:
New
5 customers are viewing this product

video gallery

Description

Edelbrock Rollin' Thunder Camshaft #3714 is designed for 4.3L 90 Degree V6 Chevy engines and produce optimum torque from the low-end to the mid-range. Rollin' Thunder camshafts match with Performer manifolds for vehicles operating from off-idle to 5500 rpm. They are smooth idling cams for daily drivers, trucks, vans, RVs and 4x4s. You can expect a major improvement in throttle response and torque. In the manifold section you'll find torque graphs showing the power gains from Performer manifolds and Performer-Plus cams. All camshafts include flat tappet lifters (except for cams designed for use with stock roller lifters), assembly lube and instructions. For use with OEM hydraulic roller lifters (use original lifters). Not for 1992-Later 4.3L balanced shaft engines. Requires aftermarket computer chip (not available from Edelbrock) for use with intake manifold #3713. Call Edelbrock Tech 800-416-8628 for info.Camshaft specifications:- Intake duration: 210 Degrees- Exhaust duration: 214 Degrees- Intake lift: .479"- Exhaust lift: .488"- Lobe separation: 112 Degree- Intake Center Line: 107- Vacuum: 17"

BRAND: Edelbrock

FEATURES:

  • Chevrolet:Small-Block 90 Deg V6:262 (4.3L)
  • Major Improvement in Throttle Response and Torque
  • Matched to Edelbrock Performer Intakes
  • 37211; Ford; Edelbrock; Intake Manifold; Intake; Manifold; Dual-Plane; Single-Plane; Tunnel-Ram; Cross-Ram; Performer; Performer RPM; Victor JR.; Super Victor; Victor; Dual-Quad; Slingshot; Polished
  • Rollin Thunder Camshaft for Chevy 4.3L 90 Deg V6
  • Rollin Thunder Camshaft
  • Designed for Optimum Torque and Acceleration
  • Maximum Performance From Idle through Mid-Range
  • V6Camshaft
  • Includes Hydraulic Lifters and Assembly Lube
  • Use For Daily Drivers/Trucks/Vans/RVs/4x4s
  • { eo : 5in.}
  • Take the Guesswork Out of Camshaft Selection!
  • Compression ratio of at least 9.5:1; Adjustable valvetrain required; For street high-performance and racing applications only; Lower than stock rear gearing; High performance torque converter (in automatic transmission equipped vehicles) are necessary.; P
  • Rollin Thunder Camshaft for Chevy 4.3L 90ft. V6
  • CAMSHAFTS

SPECIFICS:

Engine Make/SizeChevy 262
Exh. Duration @ .050 in. (Deg)214
Exh. Duration Advertised (Deg)276
Exhaust Valve Lift0.488 in.
Intake Duration @ 0.050 in.210 Degree
Intake Duration Advertised272
Intake Valve Lift0.479 in.
Lifter TypeHydraulic Roller
RPM Range1500-5500
UsageOEM
WARNING CA Proposition 65Yes
WARNING CA Proposition 65 MessageWARNING: This product can expose you to Chromium; which is known to the State of California to cause cancer or birth defects or other reproductive harm. For more information; visit www.P65warnings.ca.gov.

Hyd Roller; 1500-5500rpm; Adv Dur at 0.050 Int/Exh 210/214 Deg.; Lift at Valve Int/Exh 0.479/0.488 in.; Lobe Spes 112 Angle; Intake Center Line 107 Deg.Designed For The Engine Swap Market~Not Legal For Use On Pollution Controlled Vehicles

DOWNLOADS:

WARRANTY TIME: 12 Months

APPLICATIONS:

  • 1992-1995 GMC K1500
  • 1992-1995 Chevrolet P30
  • 1992-1992 Oldsmobile Bravada
  • 1992-1994 Chevrolet Astro
  • 1992-1995 GMC P3500
  • 1992-1993 GMC Typhoon
  • 1992-1995 Chevrolet K1500
  • 1992-1995 GMC G1500
  • 1992-1994 GMC Safari
  • 1992-1995 GMC Sonoma
  • 1992-1995 GMC G3500
  • 1992-1995 Chevrolet S10
  • 1992-1993 Chevrolet Caprice
  • 1992-1995 Chevrolet K2500
  • 1992-1994 GMC Jimmy
  • 1992-1995 GMC G2500
  • 1992-1996 Chevrolet G30
  • 1992-1995 Chevrolet C2500
  • 1992-1994 Chevrolet S10 Blazer
  • 1992-1995 Chevrolet G10
  • 1992-1995 Chevrolet C1500
  • 1992-1995 Chevrolet G20
  • 1992-1992 Chevrolet Commercial Chassis
  • 1992-1995 GMC C2500
  • 1992-1995 GMC K2500
  • 1992-1995 GMC C1500

Attributes
Product type:
Aftermarket
Features and Benefits:
Edelbrock Rollin' Thunder Camshaft #3714 is designed for 4.3L 90 Degree V6 Chevy engines and produce optimum torque from the low-end to the mid-range. Rollin' Thunder camshafts match with Performer manifolds for vehicles operating from off-idle to 55
Features and Benefits:
Matched to Edelbrock Performer Intakes
Features and Benefits:
Includes Hydraulic Lifters and Assembly Lube
Features and Benefits:
Major Improvement in Throttle Response and Torque
Features and Benefits:
Use For Daily Drivers/Trucks/Vans/RVs/4x4s
Features and Benefits:
Take the Guesswork Out of Camshaft Selection!
Features and Benefits:
Designed for Optimum Torque and Acceleration
Features and Benefits:
Maximum Performance From Idle through Mid-Range
Brand Description:
Rollin Thunder Camshaft
Product Description:
Rollin Thunder Camshaft for Chevy 4.3L 90ft. V6
Short Description:
CAMSHAFTS
Hazardous Material:
No
Minimum Order Quantity:
1
Item Level GTIN:
00085347037148
Quantity Per Application:
1



Need help? We're available at1-321-400-8080 - Email us atinfo@partsonnet.net orlive help
to top