×
close
click to zoom in

Edelbrock 3790 | Engine Camshaft and Lifter Kit

(No reviews yet) Write a Review
$295.48
Part Number
EDE3790
UPC:
85347037902
Condition:
New
5 customers are viewing this product

Edelbrock part #3790 Performer-Plus camshaft is designed for Chevy 2.8L 60 degree V-6 applications. The camshaft will produce optimum torque from the low-end to the mid-range, Performer-Plus camshafts match with Performer manifolds for vehicles operating from off-idle to 5500 rpm. This Performer-Plus is a smooth idling cam for daily drivers, trucks, vans, RVs and 4x4s. You can expect a major improvement in throttle response and torque. All camshafts include flat tappet lifters, assembly lube and instructions.Camshaft Specifications:- Duration @ .050 Intake: 204 degrees - Duration @ .050 Exhaust: 214 degrees- Lift @ Valve Intake: .420"- Lift @ Valve Exhaust: .442"- Lobe Separation: 112 Degrees- Intake Centerline: 107 Degrees- Idle Vacuum @ 1000 RPM's: 16"

BRAND: Edelbrock

FEATURES:

  • Cam Lift kit
  • CAMSHAFTS
  • Performer-Plus Camshaft Kit
  • Major Improvement in Throttle Response and Torque
  • Maximum Performance From Idle through Mid-Range
  • Take the Guesswork Out of Camshaft Selection!
  • Use For Daily Drivers/Trucks/Vans/RVs/4x4s
  • { eo : 5in.}
  • Chevrolet:Small-Block 60 Deg V6:173 (2.8L)
  • Includes Hydraulic Lifters and Assembly Lube
  • Edelbrock; Gasket; #3813; Throttle Body; 90mm; ProFlo; XT; Single Blade; EFI; Electronic Fuel Injection; Fuel Injection
  • Performer-Plus Camshaft Kit for Chevy 2.8L 60DEG V6
  • Matched to Edelbrock Performer Intakes
  • Performer-Plus Camshaft Kit for Chevy 2.8L 90 Deg V6
  • Designed for Optimum Torque and Acceleration
  • In order for this Performer-Plus cam and lifter kit to be covered under ANY WARRANTY you must use either the correct Edelbrock Sure Seat valve springs or the stock original equipment valve springs.; Oil/additive must contain Zinc designed for use with fla

SPECIFICS:

Engine Make/SizeChevy 200-262 (90 Degree)
Exh. Duration @ .050 in. (Deg)214
Exh. Duration Advertised (Deg)263
Exhaust Valve Lift0.442 in.
Intake Duration @ 0.050 in.204 Degree
Intake Duration Advertised253
Intake Valve Lift0.420 in.
Lifter TypeHydraulic Flat Tappet
RPM Range0-6750
UsageStreet/Performance
WARNING CA Proposition 65Yes
WARNING CA Proposition 65 MessageWARNING: This product can expose you to Chromium; which is known to the State of California to cause cancer or birth defects or other reproductive harm. For more information; visit www.P65warnings.ca.gov.

Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Ext 204/214 Deg.; Lift at Valve Int/Exh 0.420/0.442 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.;Engines Transplanted Into Uncontrolled/Pre-Pollution VehicleDesigned For The Engine Swap Market~For Non-Computer Controller Vehicles With Stock Heads~Idle Vacuum at 1000 RPM - 16 inch~Not Legal For Use On Pollution Controlled Vehicles

DOWNLOADS:

WARRANTY TIME: 12 Months

APPLICATIONS:

  • 1986-1986 Jeep Comanche
  • 1980-1984 Oldsmobile Omega
  • 1982-1986 Chevrolet Celebrity
  • 1982-1986 Pontiac 6000
  • 1980-1985 Buick Skylark
  • 1980-1984 Pontiac Phoenix
  • 1986-1986 Oldsmobile Cutlass Ciera
  • 1986-1986 Buick Century
  • 1980-1983 Chevrolet Citation

Product type:
Aftermarket
Features and Benefits:
Edelbrock part #3790 Performer-Plus camshaft is designed for Chevy 2.8L 60 degree V-6 applications. The camshaft will produce optimum torque from the low-end to the mid-range, Performer-Plus camshafts match with Performer manifolds for vehicles opera
Features and Benefits:
Designed for Optimum Torque and Acceleration
Features and Benefits:
Maximum Performance From Idle through Mid-Range
Features and Benefits:
Matched to Edelbrock Performer Intakes
Features and Benefits:
Includes Hydraulic Lifters and Assembly Lube
Features and Benefits:
Major Improvement in Throttle Response and Torque
Features and Benefits:
Use For Daily Drivers/Trucks/Vans/RVs/4x4s
Features and Benefits:
Take the Guesswork Out of Camshaft Selection!
Brand Description:
Performer-Plus Camshaft Kit
Product Description:
Performer-Plus Camshaft Kit for Chevy 2.8L 60DEG V6
Short Description:
CAMSHAFTS
Hazardous Material:
No
Minimum Order Quantity:
1
Item Level GTIN:
00085347037902
Quantity Per Application:
1



Need help? We're available at1-321-400-8080 - Email us atinfo@partsonnet.net orlive help
to top