×
close

Shopping Cart:

Toggle menu
1-321-400-8080

24/7 Customer Service
0

$0.00

0
Edelbrock 7106 | Engine Camshaft and Lifter Kit
click to zoom in

Edelbrock 7106 | Engine Camshaft and Lifter Kit

(No reviews yet) Write a Review
$444.75
Part Number
EDE7106
UPC:
85347071067
Condition:
New
5 customers are viewing this product

video gallery

Description

Edelbrock part #7106 Performer RPM Camshaft is designed for Ford FE 390-428 V-8 applications. This Edelbrock cam kit produced 418 HP & 434 ft-lbs. of torque when used with #7105 intake and #60069 cylinder heads on a 390 engine. The camshaft works well with high-performance's street applications, Performer RPM cams provide power from 1500 to 6500 rpm. This hydraulic lifter camshaft is dyno-matched to Performer RPM manifolds for high-rpm horsepower while still maintaining acceptable low-end torque. With 10 to 12 inches of manifold vacuum at idle, Performer RPM cams have more lift and duration than most street camshafts. Hydraulic flat tappet lifters are included with each Performer RPM camshaft.Camshaft Specifications:- Duration @ .050 Intake: 236 degrees - Duration @ .050 Exhaust: 236 degrees- Lift @ Valve Intake: .572"- Lift @ Valve Exhaust: .572"- Lobe Separation: 108 Degrees- Intake Centerline: 103 Degrees- Idle Vacuum @ 1000 RPM's: 11"

BRAND: Edelbrock

FEATURES:

  • Cam Lift kit
  • CAMSHAFTS
  • Performer RPM Camshaft Kit
  • Take the Guesswork Out of Camshaft Selection!
  • Ford:FE:332 (5.4L)/352 (5.8L)/360 (5.9L)/390 (6.4L)/406 (6.6L)/410 (6.7L)/427 (7.0L)/428 (7.0L)
  • Dyno-Matched/Street-Proven Performance
  • More Lift And Duration Than Most Street Camshafts
  • Performer-Plus Camshaft Kit for Big-Block Ford FE 390-428 V8
  • Designed for 1500 to 6500 RPM Performance
  • 7110; Chevy; Chevrolet; Edelbrock; Intake Manifold; Intake; Manifold; Single-Plane; Tunnel-Ram; Satin
  • Performer-Plus Camshaft Kit for Big-Block Ford FE 390-428 V8
  • 10 To 12 in. Of Manifold Vacuum At Idle
  • Matched to Edelbrock Performer RPM Intakes
  • Maximum Power in High-RPM with Good Low-End Torque
  • Recommended Valve Springs for OEM heads: Edelbrock part #5712; Use only stock ratio rocker arms; Adjustable valvetrain required; In order for this Performer RPM cam and lifter kit to be covered under ANY WARRANTY you MUST use the correct Edelbrock Sure Se
  • Includes Hydraulic Lifters and Assembly Lube
  • { eo : 5in.}

SPECIFICS:

Engine Make/SizeFord 390-428
Exh. Duration @ .050 in. (Deg)236
Exh. Duration Advertised (Deg)296
Exhaust Valve Lift0.572 in.
Intake Duration @ 0.050 in.236 Degree
Intake Duration Advertised296
Intake Valve Lift0.572 in.
Lifter TypeHydraulic Flat Tappet
RPM Range1000-7000
UsageStreet/Performance
WARNING CA Proposition 65Yes
WARNING CA Proposition 65 MessageWARNING: Cancer and Reproductive Harm P65Warnings.ca.gov

Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 236 Deg.; Lift at Valve Int/Exh 0.572 in.; Lobe Seps 108 Deg. Intake Center Line 103 Deg.;Engines Transplanted Into Uncontrolled/Pre-Pollution VehicleDesigned For The Engine Swap Market~Idle Vacuum at 1000 RPM - 11 inch~Not Legal For Use On Pollution Controlled Vehicles~Produces 418hp and 434 ft.-lbs. When Matched w/7105 Intake and 60069 Heads~Will Not Work In Ford 427 Side Oilers

DOWNLOADS:

WARRANTY TIME: 12 Months

APPLICATIONS:

  • 1961-1971 Ford Country Sedan
  • 1961-1967 Ford Galaxie
  • 1961-1971 Mercury Colony Park
  • 1964-1969 Mercury Comet
  • 1975-1976 Ford F-150
  • 1967-1967 Mercury Brougham
  • 1961-1968 Mercury Commuter
  • 1964-1970 Mercury Cyclone
  • 1958-1958 Edsel Corsair
  • 1964-1971 Ford Custom 500
  • 1968-1976 Ford F-250
  • 1968-1970 Ford Torino
  • 1964-1967 Mercury Villager
  • 1967-1969 Ford Ranchero
  • 1961-1970 Ford Fairlane
  • 1967-1970 Mercury Cougar
  • 1963-1963 Mercury Country Cruiser
  • 1963-1963 Ford 300
  • 1966-1967 Mercury Voyager
  • 1967-1970 Mercury Marquis
  • 1967-1970 Ford Mustang
  • 1968-1969 Mercury Montego
  • 1965-1971 Ford LTD
  • 1964-1971 Ford Custom
  • 1963-1970 Mercury Marauder
  • 1964-1969 Ford GT40
  • 1961-1963 Mercury Meteor
  • 1964-1968 Mercury Montclair
  • 1968-1976 Ford F-100
  • 1966-1967 Mercury Capri
  • 1968-1976 Ford F-350
  • 1961-1971 Ford Ranch Wagon
  • 1961-1969 Ford Thunderbird
  • 1962-1971 Ford Galaxie 500
  • 1961-1970 Mercury Monterey
  • 1964-1967 Mercury Caliente
  • 1958-1958 Edsel Citation
  • 1964-1968 Mercury Park Lane
  • 1961-1971 Ford Country Squire

Attributes
Product type:
Aftermarket
Features and Benefits:
Edelbrock part #7106 Performer RPM Camshaft is designed for Ford FE 390-428 V-8 applications. This Edelbrock cam kit produced 418 HP & 434 ft-lbs. of torque when used with #7105 intake and #60069 cylinder heads on a 390 engine. The camshaft works wel
Features and Benefits:
Matched to Edelbrock Performer RPM Intakes
Features and Benefits:
10 To 12 in. Of Manifold Vacuum At Idle
Features and Benefits:
More Lift And Duration Than Most Street Camshafts
Features and Benefits:
Includes Hydraulic Lifters and Assembly Lube
Features and Benefits:
Dyno-Matched/Street-Proven Performance
Features and Benefits:
Take the Guesswork Out of Camshaft Selection!
Features and Benefits:
Designed for 1500 to 6500 RPM Performance
Features and Benefits:
Maximum Power in High-RPM with Good Low-End Torque
Brand Description:
Performer RPM Camshaft Kit
Product Description:
Performer-Plus Camshaft Kit for Big-Block Ford FE 390-428 V8
Short Description:
CAMSHAFTS
Hazardous Material:
No
Minimum Order Quantity:
1
Item Level GTIN:
00085347071067
Quantity Per Application:
1



Need help? We're available at1-321-400-8080 - Email us atinfo@partsonnet.net orlive help
to top