×
close

Shopping Cart:

Toggle menu
1-321-400-8080

24/7 Customer Service
0

$0.00

0
Edelbrock 7132 | Engine Camshaft and Lifter Kit
click to zoom in

Edelbrock 7132 | Engine Camshaft and Lifter Kit

(No reviews yet) Write a Review
$427.95
Part Number
EDE7132
UPC:
85347071326
Condition:
New
5 customers are viewing this product

video gallery

Description

Edelbrock part #7132 Performer RPM Camshaft is designed for AMC 343-401 V-8 applications. This Edelbrock cam kit produced 433 HP & 489 ft-lbs. of torque when used with #7531 intake and #60119 cylinder heads on a 401 engine. The camshaft works well with high-performance's street applications, Performer RPM cams provide power from 1500 to 6500 rpm. This hydraulic lifter camshaft is dyno-matched to Performer RPM manifolds for high-rpm horsepower while still maintaining acceptable low-end torque. With 10 to 12 inches of manifold vacuum at idle, Performer RPM cams have more lift and duration than most street camshafts. Hydraulic flat tappet lifters are included with each Performer RPM camshaft.Camshaft Specifications:- Duration @ .050 Intake: 234 degrees - Duration @ .050 Exhaust: 244 degrees- Lift @ Valve Intake: .520"- Lift @ Valve Exhaust: .544"- Lobe Separation: 112 Degrees- Intake Centerline: 107 Degrees- Idle Vacuum @ 1000 RPM's: 11"

BRAND: Edelbrock

FEATURES:

  • 10 To 12 in. Of Manifold Vacuum At Idle
  • Performer-Plus Camshaft Kit for AMC 343-401 V8
  • { eo : 5in.}
  • AMC:-:290 (4.7L)/304 (5.0L)/360 (5.9L)/390 (6.4L)/401 (6.6L)
  • Designed for 1500 to 6500 RPM Performance
  • Maximum Power in High-RPM with Good Low-End Torque
  • Includes Hydraulic Lifters and Assembly Lube
  • Matched to Edelbrock Performer RPM Intakes
  • For non-computer controlled vehicles; Use only stock ratio rocker arms; Adjustable valvetrain required; In order for this Performer RPM cam and lifter kit to be covered under ANY WARRANTY you MUST use the correct Edelbrock Sure Seat Valve Springs or equiv
  • Cam Lift kit
  • Performer RPM Camshaft Kit
  • Performer-Plus Camshaft Kit for AMC 343-401 V8
  • Dyno-Matched/Street-Proven Performance
  • More Lift And Duration Than Most Street Camshafts
  • Take the Guesswork Out of Camshaft Selection!
  • CAMSHAFTS
  • 71363; Chevy; Chevrolet; Edelbrock; Intake Manifold; Intake; Manifold; Single-Plane; Pro-Flo XT; Black Powder Coated

SPECIFICS:

Engine Make/SizeAMC 290-401
Exh. Duration @ .050 in. (Deg)244
Exh. Duration Advertised (Deg)320
Exhaust Valve Lift0.544 in.
Intake Duration @ 0.050 in.234 Degree
Intake Duration Advertised310
Intake Valve Lift0.520 in.
Lifter TypeHydraulic Flat Tappet
RPM Range1000-7000
UsageStreet/Performance
WARNING CA Proposition 65Yes
WARNING CA Proposition 65 MessageWARNING: This product can expose you to Chromium; which is known to the State of California to cause cancer or birth defects or other reproductive harm. For more information; visit www.P65warnings.ca.gov.

Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 234/244 Deg.; Lift at Valve Int/Exh 0.520/0.544 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.;Engines Transplanted Into Uncontrolled/Pre-Pollution VehicleDesigned For The Engine Swap Market~For Non Computer-Controlled Vehicles~Idle Vacuum at 1000 RPM - 11 inch~Not Legal For Use On Pollution Controlled Vehicles~Produces 433HP and 489 ft.-lbs When Matched w/60119 Heads

DOWNLOADS:

WARRANTY TIME: 12 Months

APPLICATIONS:

  • 1971-1973 Jeep J-100
  • 1971-1973 Jeep J-4600
  • 1974-1974 Bricklin SV-1
  • 1972-1983 Jeep Wagoneer
  • 1974-1988 Jeep J10
  • 1984-1991 Jeep Grand Wagoneer
  • 1967-1970 American Motors Rebel
  • 1974-1983 Jeep Cherokee
  • 1971-1974 American Motors Hornet
  • 1969-1969 American Motors Rambler
  • 1967-1967 American Motors Marlin
  • 1971-1973 Jeep J-4700
  • 1971-1973 Jeep J-4500
  • 1967-1974 American Motors Ambassador
  • 1971-1978 American Motors Matador
  • 1970-1971 Jeep J-3800
  • 1970-1973 Jeep J-2600
  • 1967-1968 American Motors American
  • 1971-1973 Jeep J-4800
  • 1968-1970 American Motors AMX
  • 1974-1988 Jeep J20
  • 1968-1974 American Motors Javelin
  • 1970-1973 Jeep J-2500

Attributes
Product type:
Aftermarket
Features and Benefits:
Edelbrock part #7132 Performer RPM Camshaft is designed for AMC 343-401 V-8 applications. This Edelbrock cam kit produced 433 HP & 489 ft-lbs. of torque when used with #7531 intake and #60119 cylinder heads on a 401 engine. The camshaft works well wi
Features and Benefits:
Includes Hydraulic Lifters and Assembly Lube
Features and Benefits:
Dyno-Matched/Street-Proven Performance
Features and Benefits:
Take the Guesswork Out of Camshaft Selection!
Features and Benefits:
Designed for 1500 to 6500 RPM Performance
Features and Benefits:
Maximum Power in High-RPM with Good Low-End Torque
Features and Benefits:
Matched to Edelbrock Performer RPM Intakes
Features and Benefits:
10 To 12 in. Of Manifold Vacuum At Idle
Features and Benefits:
More Lift And Duration Than Most Street Camshafts
Brand Description:
Performer RPM Camshaft Kit
Product Description:
Performer-Plus Camshaft Kit for AMC 343-401 V8
Short Description:
CAMSHAFTS
Hazardous Material:
No
Minimum Order Quantity:
1
Item Level GTIN:
00085347071326
Quantity Per Application:
1



Need help? We're available at1-321-400-8080 - Email us atinfo@partsonnet.net orlive help
to top