×
close

Shopping Cart:

Toggle menu
1-321-400-8080

24/7 Customer Service
0

$0.00

0
Edelbrock 7167 | Engine Camshaft and Lifter Kit
click to zoom in

Edelbrock 7167 | Engine Camshaft and Lifter Kit

(No reviews yet) Write a Review
$434.28
Part Number
EDE7167
UPC:
85347071678
Condition:
New
5 customers are viewing this product

video gallery

Description

Edelbrock part #7167 Performer RPM Camshaft is designed for Ford 429-460 V-8 applications. This Edelbrock cam kit produced 506 HP & 536 ft-lbs. of torque when used with #7166 intake and #60669 cylinder heads on a 460 engine. The camshaft works well with high-performance's street applications, Performer RPM cams provide power from 1500 to 6500 rpm. This hydraulic lifter camshaft is dyno-matched to Performer RPM manifolds for high-rpm horsepower while still maintaining acceptable low-end torque. With 10 to 12 inches of manifold vacuum at idle, Performer RPM cams have more lift and duration than most street camshafts. Hydraulic flat tappet lifters are included with each Performer RPM camshaft.Camshaft Specifications:- Duration @ .050 Intake: 234 degrees - Duration @ .050 Exhaust: 244 degrees- Lift @ Valve Intake: .556"- Lift @ Valve Exhaust: .581"- Lobe Separation: 108 Degrees- Intake Centerline: 103 Degrees- Idle Vacuum @ 1000 RPM's: 12"

BRAND: Edelbrock

FEATURES:

  • Designed for 1500 to 6500 RPM Performance
  • Includes Hydraulic Lifters and Assembly Lube
  • 7176; Chrysler; Edelbrock; Intake Manifold; Intake; Manifold; Dual-Plane; Performer RPM; Satin
  • 10 To 12 in. Of Manifold Vacuum At Idle
  • Matched to Edelbrock Performer RPM Intakes
  • Maximum Power in High-RPM with Good Low-End Torque
  • { eo : 5in.}
  • Recommended Valve Springs for OEM heads: Edelbrock part #5767; Use only stock ratio rocker arms; Adjustable valvetrain required; In order for this Performer RPM cam and lifter kit to be covered under ANY WARRANTY you MUST use the correct Edelbrock Sure Se
  • Ford:Big-Block:429 (7.0L )/460 (7.5L)
  • Performer RPM Camshaft Kit
  • CAMSHAFTS
  • CAMSHAFT PERFORMER RPM FORD 460
  • More Lift And Duration Than Most Street Camshafts
  • Take the Guesswork Out of Camshaft Selection!
  • Performer-Plus Camshaft Kit for Big-Block Ford 429/460 V8
  • Cam Lift kit
  • Dyno-Matched/Street-Proven Performance

SPECIFICS:

Engine Make/SizeFord 429-460
Exh. Duration @ .050 in. (Deg)244
Exh. Duration Advertised (Deg)300
Exhaust Valve Lift0.581 in.
Intake Duration @ 0.050 in.234 Degree
Intake Duration Advertised290
Intake Valve Lift0.556 in.
Lifter TypeHydraulic Flat Tappet
RPM Range1000-7000
UsageStreet/Performance
WARNING CA Proposition 65Yes
WARNING CA Proposition 65 MessageWARNING: This product can expose you to Chromium; which is known to the State of California to cause cancer or birth defects or other reproductive harm. For more information; visit www.P65warnings.ca.gov.

Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 234/244 Deg.; Lift at Valve Int/Exh 0.556/0.581 in.; Lobe Seps 108 Deg.; Intake Center Line 103 Deg.;Engines Transplanted Into Uncontrolled/Pre-Pollution VehicleAdjustable Pushrods Or Rocker Arms Required~Designed For The Engine Swap Market~Idle Vacuum at 1000 RPM - 12 inch~Not Legal For Use On Pollution Controlled Vehicles~Produces 506hp and 536 ft.-lbs. When Matched w/7166 Intake and 60669 Heads

DOWNLOADS:

WARRANTY TIME: 12 Months

APPLICATIONS:

  • 1969-1974 Mercury Monterey
  • 1978-1978 Ford E-100 Econoline
  • 1970-1977 Ford Ranchero
  • 1997-1997 Ford F-250 HD
  • 1975-1979 Ford F-150
  • 1977-1978 Lincoln Mark V
  • 1972-1976 Lincoln Mark IV
  • 1969-1974 Ford Country Sedan
  • 1969-1971 Ford Mustang
  • 1969-1974 Ford Country Squire
  • 1983-1997 Ford F-350
  • 1975-1978 Mercury Grand Marquis
  • 1977-1996 Ford E-350 Econoline Club Wagon
  • 1975-1976 Ford Elite
  • 1990-1996 Ford F Super Duty
  • 1973-1979 Ford F-350
  • 1973-1979 Ford F-250
  • 1969-1970 Mercury Marauder
  • 1975-1991 Ford E-250 Econoline Club Wagon
  • 1969-1974 Mercury Colony Park
  • 1969-1976 Ford Custom 500
  • 1968-1976 Ford Thunderbird
  • 1973-1974 Ford F-100
  • 1968-1978 Lincoln Continental
  • 1970-1970 Ford Falcon
  • 1973-1976 Mercury Cougar
  • 1972-1976 Ford Gran Torino
  • 1970-1976 Mercury Montego
  • 1989-1996 Ford F53
  • 1969-1974 Ford Ranch Wagon
  • 1968-1971 Lincoln Mark III
  • 1979-1979 Ford F-100
  • 1969-1974 Ford Galaxie 500
  • 1975-1996 Ford E-350 Econoline
  • 1983-1996 Ford F-250
  • 1975-1980 Ford E-250 Econoline
  • 1969-1972 Ford Custom
  • 1969-1978 Ford LTD
  • 1970-1970 Ford Fairlane
  • 1970-1976 Ford Torino
  • 1996-1996 Ford Econoline Super Duty
  • 1969-1971 Mercury Cougar
  • 1969-1971 Mercury Cyclone
  • 1969-1978 Mercury Marquis

Attributes
Product type:
Aftermarket
Features and Benefits:
Edelbrock part #7167 Performer RPM Camshaft is designed for Ford 429-460 V-8 applications. This Edelbrock cam kit produced 506 HP & 536 ft-lbs. of torque when used with #7166 intake and #60669 cylinder heads on a 460 engine. The camshaft works well w
Features and Benefits:
Dyno-Matched/Street-Proven Performance
Features and Benefits:
Take the Guesswork Out of Camshaft Selection!
Features and Benefits:
Designed for 1500 to 6500 RPM Performance
Features and Benefits:
Maximum Power in High-RPM with Good Low-End Torque
Features and Benefits:
Matched to Edelbrock Performer RPM Intakes
Features and Benefits:
10 To 12 in. Of Manifold Vacuum At Idle
Features and Benefits:
More Lift And Duration Than Most Street Camshafts
Features and Benefits:
Includes Hydraulic Lifters and Assembly Lube
Brand Description:
Performer RPM Camshaft Kit
Product Description:
CAMSHAFT PERFORMER RPM FORD 460
Short Description:
CAMSHAFTS
Hazardous Material:
No
Minimum Order Quantity:
1
Item Level GTIN:
00085347071678
Quantity Per Application:
1



Need help? We're available at1-321-400-8080 - Email us atinfo@partsonnet.net orlive help
to top