×
close
click to zoom in

Fabtech K2322 | Ford Ranger Suspension Lift Kit

(No reviews yet) Write a Review
$698.24
Part Number
FABK2322
UPC:
674866108042
Condition:
New
5 customers are viewing this product

Fabtech's Upper Control Arm system provides a 3.5" lift over stock with increased wheel travel and no suspension bind at full droop. Lift is accomplished with steel spacers that utilize the factory Coilover shocks for a stock ride. The replacement Upper Control Arms address the geometry of the front suspension with the new ride height for proper alignability. Heavy duty ball joints allow for extended suspension travel to eliminate binding. The system has been designed for proper CV axle angle and plunge thus eliminating the need to reposition the front differential. Rear lift comes from 1.5" blocks and u-bolts.This 3.5" Upper Control Arm system allows clearance of 31" tires without the removal or cutting of the factory Intrusion Beams located in the front fenderwell. The Intrusion Beams are an integral part of the front collision safety impact feature of the Ranger and limits tire clearance to a 31" tire with a 3.5" lift. For Ranger owners that want to run a 33" tire, Fabtech offers optional replacement Offset Intrusion Beams. They directly replace the factory units helping to retain the safety feature of the Beams while allowing clearance of 33" tires. These 1/4" thick steel Beams are offset to allow full steer with 33/12.50R tires w/ a 5" back space wheel.

BRAND: Fabtech

FEATURES:

  • No Welding Required
  • Simplified Design With Fast Install
  • Ball Joint Control Arm Lift System
  • Ball Joint Control Arm Lift System; 3.5 in. Lift; w/Rear Performance Shocks; w/o Intrusion Beam Kit; Incl. PN [FTS22293/FTS7265];
  • No Cutting Required
  • No Drilling Required
  • 2 to 3 Hours Installation
  • Steering Knuckles Retain Proper ESC
  • No Driveshaft Modification
  • No Loss Of Ground Clearance

SPECIFICS:

Lift/Drop Height3.5 in.
WARNING CA Proposition 65Yes
WARNING CA Proposition 65 MessageWarning: Cancer and Reproductive Harm-www.P65Warnings.ca.gov.

3.5 in. Lift; w/Rear Performance Shocks; w/o Intrusion Beam Kit; Incl. PN [FTS22293/FTS7265]

DOWNLOADS:

APPLICATIONS:

  • 2019-2019 Ford Ranger

Product type:
Aftermarket
Features and Benefits:
Fabtech's Upper Control Arm system provides a 3.5 in. lift over stock with increased wheel travel and no suspension bind at full droop. Lift is accomplished with steel spacers that utilize the factory Coilover shocks for a stock ride. The replac
Features and Benefits:
No Driveshaft Modification
Features and Benefits:
No Loss Of Ground Clearance
Features and Benefits:
Simplified Design With Fast Install
Features and Benefits:
Steering Knuckles Retain Proper ESC
Features and Benefits:
2 to 3 Hours Installation
Features and Benefits:
No Drilling Required
Features and Benefits:
No Welding Required
Features and Benefits:
No Cutting Required
California Proposition 65:
WARNING: Cancer and Reproductive Harm-www.P65Warnings.ca.gov.
Brand Description:
Ball Joint Control Arm Lift System
Product Description:
Ball Joint Control Arm Lift System; 3.5 in. Lift; w/Rear Performance Shocks; w/o Intrusion Beam Kit; Incl. PN [FTS22293/FTS7265];
Lift/Drop Height:
3.5 in.
WARNING CA Proposition 65:
Yes
Short Description:
LftKt-Suspw/Shock
Hazardous Material:
No
Minimum Order Quantity:
1
Weight - Each (Gross Pounds):
53.0000
Height - Each (Inch):
15.5000
Length - Each (Inch):
24.0000
Width - Each (Inch):
12.2600
Life Cycle Status:
Available to Order
Life Cycle Status Description:
Available to Order - Part is released to customers for ordering.
Item Level GTIN:
00674866108042

Prop 65 WarningWARNING

This product can expose you to chemicals, including WARNING: Cancer and Reproductive Harm-www.P65Warnings.ca.gov. which is known to the State of California to cause cancer or birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.




Need help? We're available at1-321-400-8080 - Email us atinfo@partsonnet.net orlive help
to top