These turbo inlets are the perfect addition to any aFe POWER air intake. They remove the air flow restriction of the factory turbo inlets and guarantee maximum air flow to the turbos for maximum power. They provide a smooth transition for the air from the air intake system to the turbos with minimum restriction. This system is precisely designed on CAD software for perfect fitment and maximize the air flow path to the turbos. The tubes are constructed of high-quality cross-linked polyethylene (XLPE) to resist heat and impact. Stainless steel rings are pressed in the tube ends to protect the tubes from collapsing under pressure and heat. Silicone couplings are reinforced with three layers of polyester, offering heat resistance and excellent protection against wear and deterioration, and mate directly to the turbos. Stainless steel clamps are also provided to guarantee perfect seal years after years. aFe POWER engineers spent countless hours and created multiple 3D printed prototypes to guarantee perfect fitment while producing maximum power. Each iteration has been tested on our in-house dyno alongside extensive road testing both on the street and off-road, to make certain these turbo inlet tubes will perform in any situation. This kit comes with all necessary fittings pre-installed on the tubes for a fast and easy installation. All factory connections are maintained to ensure your truck runs perfectly. These turbo inlets works perfectly with all aFe POWER air intake systems as well as the factory air intake system.
| WARNING CA Proposition 65 | Yes |
| WARNING CA Proposition 65 Message | WARNING: This product contains a chemical known to the State of California to cause [cancer] [and/or birth defects or other reproductive harm]. |
WARNINGThis product can expose you to chemicals, including WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov which is known to the State of California to cause cancer or birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.
Advanced FLOW Engineering
This turbo inlet is the perfect addition to your aFe air intake system. It removes restriction of the factory turbo inlet and guarantees increased air flow for maximum power. It provides a smooth...
Advanced FLOW Engineering
This turbo inlet is the perfect addition to the Takeda intake. It removes the air flow restriction of the factory turbo inlet and guarantees the maximum air flow to the turbo for maximum power. It...
Advanced FLOW Engineering
This turbo inlet removes the air flow restriction of the factory turbo inlet and guarantees the maximum air flow to the turbo for maximum power. It provides a smooth transition for the air from the...
Advanced FLOW Engineering
This oversized 2-1/4in OD Turbo Muffler Delete replaces the factory turbo muffler located between the turbo compressor outlet and the hot side charge pipe. The straight through oversized design...
Advanced FLOW Engineering
aFe is proud to introduce the Takeda Mid-Pipe Exhaust System for the 2013-2014 Honda Accord Coupe EX-L V6. In testing, this system produced an additional 2 horsepower and 3 lb. x ft. torque when...
