×
close
click to zoom in

Gates 18261 | Ford Focus HVAC Heater Hose

(No reviews yet) Write a Review
$28.99
Part Number
GAT18261
UPC:
72053559163
Condition:
New
5 customers are viewing this product

Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today’s smaller, tighter-fitting engine compartments. Can be used for coolant, water and air applications. Approved for marine applications.

  • Similar to OEM specifications.
  • Has all the quality features of Gates Molded Coolant Hose.
  • Engineered to resist electrochemical degradation - the leading cause of hose failure.
  • Inside diameters range from 1/4” to 1”.
  • Meets SAE 20R3 type EC Class D-1 and D-2 specifications.

Temperature rating: -40° F to 275° F (-40° C to 135° C) in coolant hose applications.

Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.

Gates - Driven By Possibility

BRAND: Gates

FEATURES:

  • 2003-00 Ford, Focus, 4-Cyl. 2.0 L, Reservoir To Thermostat
  • Premium Molded Heater Hose
  • Premium Molded Heater Hose
  • Molded Heater Hose

SPECIFICS:

Branch Quantity0
Centerline Length (in)46.81
Centerline Length (mm)1189
End 1 Inside Diameter7
End 1 Inside Diameter.29
End 2 Inside Diameter9
End 2 Inside Diameter.36
MaterialEPDM
MoldedYes
Number of Quick Connect Fittings0

DOWNLOADS:

INTERCHANGE:

  • ACDelco: 18175L
  • Ford: 98AB 8K012 BH
  • Goodyear: 64129
  • Ford: 1M51 8K012 AA
  • Ford: YS4Z 8K012 BA
  • Carquest: 18261
  • NAPA Belts/Hose: 10261

APPLICATIONS:

  • 2000-2003 Ford Focus - Position: Reservoir To Thermostat

1-year Replacement unlimited-mileage warranty
Product type:
Aftermarket
Features and Benefits:
Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today’s smaller, tighter-fitting engine compartments. It can be used for coolant, water and air applications, also approved for marine applications.
Features and Benefits:
Has all the quality features of Gates molded coolant hose and similar to OEM specifications
Features and Benefits:
Engineered to resist electrochemical degradation – the leading cause of hose failure
Features and Benefits:
EPDM tube, synthetic fiber knit reinforcement, EPDM cover
Features and Benefits:
Meets SAE 20R3 Type EC Class D-1 and D-2 specifications
Features and Benefits:
Temperature Range: -40 Deg. F to 275 Deg. F (-40 Deg. C -135 Deg. C)
Features and Benefits:
Note: Gates recommends replacing hose clamps each time a new coolant hose is installed
Features and Benefits:
Caution: Do not use for fuel or oil transfer applications
Brand Description:
Premium Molded Heater Hose
Centerline Length (Inch):
46.8
Centerline Length (Millimeter):
1189
Branch Quantity:
0
End 1 Inside Diameter (Inch):
.29
End 1 Inside Diameter (Millimeter):
7
End 2 Inside Diameter (Inch):
.36
End 2 Inside Diameter (Millimeter):
9
Molded:
Yes
Short Description:
Heater Hose
Quick Connect Fitting Quantity:
0
Material:
EPDM
Hazardous Material:
No
Minimum Order Quantity:
1
Weight - Each (Gross Pounds):
0.4100
Height - Each (Inch):
0.5800
Length - Each (Inch):
21.7500
Width - Each (Inch):
17.7500
Life Cycle Status Description:
Announced - Part has been announced to customers on a paper “New Number Announcement”. Part is active.
Item Level GTIN:
00072053559163
Quantity Per Application:
1



Need help? We're available at1-321-400-8080 - Email us atinfo@partsonnet.net orlive help
to top