×
close

Cardone 20-327 | Ford Mustang Power Steering Pump

(No reviews yet) Write a Review
$67.99
Part Number
CAD20-327
UPC:
82617759960
Condition:
New
5 customers are viewing this product

CARDONE Remanufactured Power Steering Pumps are engineered to meet or exceed O.E. performance. Original designs are scrutinized for potential improvement, and where applicable, design upgrades are implemented to produce a more durable part than the original. All critical components are tested to ensure proper function. Every unit undergoes a hydraulic efficiency test to ensure reliable, long-lasting performance.

BRAND: Cardone Reman

FEATURES:

  • Ford Mustang 2010-05
  • Power Steering Pump
  • Power Steering Pump, Steering Pump, Pump and Reservior
  • Reman. Power Steering Pump
  • Remanufactured Power Steering Pump

SPECIFICS:

E-WasteNo
FAQsWhy do I still have hard steering in one direction after I replaced the pump?
FAQsMost likely cause is contamination. Remove the pressure hose and pressure fitting on the power steering pump. Remove the flow control valve and spring. Clean the valve and check the valve bore for damage. Reinstall the spring, valve, fitting and hose. Flush and bleed system and re-test. If okay, install power steering filter to prevent problem from re-occurring.
FAQsYes. Some O.E. manufacturers recommend that power steering fluid be changed at 50,000 miles and continue at that interval. Just like engine oil, power steering fluid will eventually break down and carry suspended contaminants from component wear and breakdown. Follow your vehicle's O.E. manufacturer's recommendations on fluid change intervals.
FAQsThe problem is not in the pump, it is in the steering gear. The pump would cause a steering problem in both directions.
FAQsWhy is the pump making a whining noise all of the time?
FAQsA whining pump is usually caused by air in the system. Remove reservoir lid and inspect fluid level and condition. If fluid has foam or air bubbles present, you must bleed the system again. Some systems are very difficult to bleed manually and may require the use of a vacuum pump to extract all of the air from the system.
FAQsThe end of the original pump's input shaft enlarged causing the pulley hole to increase during removal. The pulley must be replaced.
FAQsI only have assist when increasing engine rpm after installing the replacement pump. What's causing this?
FAQsShould I ever change my fluid, even though nothing is wrong?
FAQsI bought a replacement power steering pump and my original pulley has a loose fit on the replacement pump shaft. What should I do?
Features and BenefitsAll critical components (cam packs, spool valves, etc.) are triple-tested to ensure product reliability.
Features and BenefitsFInal pump assembly is computer-tested to measure pressure, bypass, fluid flow, valve operation, steering effort and noise to ensure reliable performance.
Features and BenefitsAll units are built with 100% new O-rings and premium-grade HNBR seals to prevent leaks. HNBR does not break down at high temperatures like conventional seal material.
Features and BenefitsAs a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit.
Features and BenefitsShafts are surfaced to precise specifications to eliminate premature seal wear and extend pump life.
Features and BenefitsOur remanufacturing process is earth-friendly, as it reduces the energy and raw material needed to make a new part by 80%.
Features and BenefitsUnits are supplied with 100% tested and calibrated pressure relief valves.
Hose Port TypeO-Ring
Housing MaterialCast Iron
Mounting Hardware IncludedNo
Package ContentsHydraulic Pump; Instruction Sheet; Sealing Kit
Power Steering Outlet ID Size0
Power Steering Outlet Thread Size16x1.5
Power Steering Pump Inlet Attachement TypeHose Barb
Power Steering Pump Outlet Attachment TypeThreaded
Power Steering Pump Outlet Quantity1
Power Steering Reservoir Cap IncludedNo
Product ConditionRemanufactured
Pulley Attachement TypePress-On
Pulley IncludedNo
Remote ReservoirYes
Reservoir IncludedNo

INTERCHANGE:

  • Ford: 7R3Z3A674C
  • Ford: 5R3Z3A674AA

APPLICATIONS:

  • 2005-2010 Ford Mustang

Product type:
Aftermarket
Features and Benefits:
CARDONE Remanufactured Power Steering Pumps are engineered to meet or exceed O.E. performance. Original designs are scrutinized for potential improvement, and where applicable, design upgrades are implemented to produce a more durable part than the o
Brand Description:
Power Steering Pump
Mounting Hardware Included:
No
Housing Material:
Cast Iron
Hazardous Material:
No
Minimum Order Quantity:
1
Reservoir Included:
No
Package Contents:
Hydraulic Pump; Instruction Sheet; Sealing Kit
Product Condition:
Remanufactured
E-Waste:
No
Pulley Included:
No
Power Steering Outlet Thread Size:
16x1.5
Hose Port Type:
O-Ring
Remote Reservoir:
Yes
FAQs:
Why is the pump making a whining noise all of the time?
FAQs:
Why do I still have hard steering in one direction after I replaced the pump?
FAQs:
The pulley may have cracked upon removal. If the shaft was mushroomed before removing the pulley, it has now enlarged the bore in the pulley. The pulley must be replaced.
FAQs:
The problem is most likely in the steering unit-the pump does not know left from right. Check for binding steering components and repair as necessary.
FAQs:
Should I ever change my fluid, even though nothing is wrong?
FAQs:
I only have assist when increasing engine rpm after installing the replacement pump. What's causing this?
FAQs:
I bought a replacement power steering pump and my original pulley has a loose fit on the replacement pump shaft. What should I do?
Life Cycle Status:
Available to Order
Features and Benefits:
Units are supplied with 100% tested and calibrated pressure relief valves.
Life Cycle Status Description:
Available to Order - Part is released to customers for ordering.
Features and Benefits:
Shafts are surfaced to precise specifications to eliminate premature seal wear and extend pump life.
Item Level GTIN:
00082617759960
Features and Benefits:
Our remanufacturing process is earth-friendly, as it reduces the energy and raw material needed to make a new part by 80%.
Quantity Per Application:
1
Features and Benefits:
FInal pump assembly is computer-tested to measure pressure, bypass, fluid flow, valve operation, steering effort and noise to ensure reliable performance.
Features and Benefits:
As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit.
Features and Benefits:
All units are built with 100% new O-rings and premium-grade HNBR seals to prevent leaks. HNBR does not break down at high temperatures like conventional seal material.
Features and Benefits:
All critical components (cam packs, spool valves, etc.) are triple-tested to ensure product reliability.
Pulley Attachement Type:
Press-On
Power Steering Reservoir Cap Included:
No
Power Steering Pump Inlet Attachement Type:
Barb
Power Steering Pump Outlet Attachment Type:
Threaded
Power Steering Pump Outlet Quantity:
1
Short Description:
Pwr Steering Pump
Country of Origin:
Mexico
Weight - Each (Gross Pounds):
5.3000
Height - Each (Inch):
7.3750
Length - Each (Inch):
5.5000
Width - Each (Inch):
4.6250



Need help? We're available at1-321-400-8080 - Email us atinfo@partsonnet.net orlive help
to top