click to zoom in
Gates 23250 | Ford Mustang Radiator Coolant Hose
5 customers are viewing this product
Gates Molded Coolant Hose is manufactured to fit specific applications. Similar to OEM specifications. Approved for marine applications.
- Recommend for upper, lower, by-pass, heater and other coolant hose applications.
- Heat and ozone resistant cover.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Re-engineered materials resist vacuum collapse. This reduces the need for internal springs in many applications.
- Meets SAE 20R4 and 20R3 Type EC Class D-1 and D-2 specifications.
Temperature Rating: -40° F to 275° F (-40° C to 135° C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Driven By Possibility
BRAND: Gates
FEATURES:
- Molded Coolant Hose
- 1999-1996 Ford, Mustang, V-8 4.6 L, Lower - Rad. To Thermostat
- Premium Molded Coolant Hose
- Premium Molded Coolant Hose
SPECIFICS:
| Branch Quantity | 0 |
| Centerline Length | 5.6 |
| Centerline Length | 142 |
| Contains Spring | No |
| End 1 Inside Diameter | 1.45 |
| End 1 Inside Diameter | 37 |
| End 2 Inside Diameter | 44 |
| End 2 Inside Diameter | 1.74 |
| Material | EPDM |
| Modular Hose | No |
| Molded | Yes |
| Number of Quick Connect Fittings | 0 |
DOWNLOADS:
INTERCHANGE:
- Carquest: 23250
- ACDelco: 20480S
- Ford: F6ZZ 8286 C
- NAPA Belts/Hose: 9972
APPLICATIONS:
- 1996-1999 Ford Mustang - Position: Lower - Radiator To Thermostat
Product type:
Aftermarket
Features and Benefits:
Our Molded Coolant Hoses are manufactured to fit upper, lower, bypass, heater and other coolant applications with OEM-quality specifications, saving you time, money and energy from going to your OE dealer for radiator hose replacements. Gates' m
Features and Benefits:
Meets requirements of SAE 20R4, class D2 and DIN 73411, class A (except for tolerances)
Features and Benefits:
Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
Features and Benefits:
Note: Gates recommends replacing hose clamps each time a new coolant hose is installed
Features and Benefits:
Caution: Do not use for fuel or oil transfer applications
Features and Benefits:
Specifically-engineered materials resist collapse under vacuum
Features and Benefits:
Engineered to resist electrochemical degradation, the leading cause of hose failure
Features and Benefits:
Pre-shaped to fit and to ensure perfectly sealed conditions
Features and Benefits:
EPDM tube; synthetic fiber knit reinforcement; heat-, ozone- and chemical coolant-resistant EPDM cover
Brand Description:
Premium Molded Coolant Hose
Centerline Length (Inch):
5.6
Centerline Length (Millimeter):
142
Branch Quantity:
0
End 1 Inside Diameter (Inch):
1.45
End 1 Inside Diameter (Millimeter):
37
End 2 Inside Diameter (Inch):
1.74
End 2 Inside Diameter (Millimeter):
44
Molded:
Yes
Short Description:
Coolant Hose
Female Nut End Thread Size (in):
No
Quick Connect Fitting Quantity:
0
Material:
EPDM
Contains Spring:
No
Hazardous Material:
No
Minimum Order Quantity:
1
Weight - Each (Gross Pounds):
0.2400
Weight - Case (Gross Pounds):
2.8980
Height - Each (Inch):
3.4800
Life Cycle Status Description:
Available Only While Supplies Last
Height - Case (Inch):
7.8750
Item Level GTIN:
00770075268970
Length - Each (Inch):
4.4800
Quantity Per Application:
1
Length - Case (Inch):
10.8750
Width - Each (Inch):
1.6800
Width - Case (Inch):
8.8750