×
close
click to zoom in

Ford Performance Parts M-6007-Z460FFT | Engine Complete Assembly

(No reviews yet) Write a Review
$14,705.04
Part Number
FMSM-6007-Z460FFT
Condition:
New
5 customers are viewing this product

Ford Performance has taken its Boss Block to the max with the biggest small block Windsor crate engine ever - the Z460. With 575 horsepower and 575 Lb. Ft. of torque, Z460 packs a pump gas fueled punch that works well on the street and on the track. The foundation of Z460 is the legendary Ford Performance Boss block topped off with high port/high flow Z-Heads. Premium components from the best aftermarket companies are used throughout the engine, like a SCAT(R) forged steel crankshaft, SCAT(R) forged H-beam connecting rods, forged Mahle(R) pistons and Clevite(R) bearings. And every Ford Performance Z460 engine is hand assembled in the U.S. with performance clearances. Oil Pan: Steel with deep front (9 quart) or rear sump (7 quart) pan with louvered windage tray and crankshaft scraper - 9 quart capacity -M-6675-FT351 front sump| Water pump: Ford Performance M-8501-G351 included long type - standard rotation| Includes Ford Performance M-9439-A50 intake manifold gaskets| Distributor: not included. Steel distributor gear required| Required fuel: Premium Unleaded| Ignition timing: 32° at 4,000 RPM| Maximum recommended rpm: 5,600 RPM| Balanced: Internal use neutral balance flywheel| Recommended intake: Edelbrock PN 2924 Super Victor (not included)| New block, oil and water pump, performance oil pan and high-performance harmonic balancer| Engine power ratings achieved with Edelbrock(R) Super Victor intake, Holley(R) 850 CFM carburetor, long tube headers.

BRAND: Ford Racing

FEATURES:

  • Ford Performance M-6049-Z304DA Aluminum Z Cylinder Heads
  • Rocker Arm Ratio: 1.65:1
  • SCAT¨ Forged Steel Crankshaft
  • SCAT¨ Forged Steel H-Beam w/6.125 in. Conn. Rods w/Floating Pins
  • Valve Covers: Ford Performance 302-137 Cast Aluminum Gray Crinkle
  • Boss Crate Engine
  • Boss Crate Engine| 460 cu. in.| 575 HP at 5500 RPM| 575 lb.-ft. Torque at 4700 RPM| w/Front Sump| 4.150 in. Bore x 4.250 in. Bore|
  • Compression Ratio: 10.0:1 (Nominal)
  • Engine Type 351 Based Small Block Ford| 460 cu. in. Displacement
  • Forged Mahle¨ Pistons w/Floating Wrist Pins
  • Hydraulic Roller Camshaft w/0.594/0.618 in. Lift
  • Vibration Damper- Ford Performance M-6316-D302 SFI Approved
  • Boss 351 Block w/9.5 in. Deck

SPECIFICS:

Compression Ratio10.0: 1
EmissionNot Legal
Engine Make/SizeFord 429-460
Horsepower Rating500+

Product type:
Aftermarket



Need help? We're available at1-321-400-8080 - Email us atinfo@partsonnet.net orlive help
to top