click to zoom in
Gates 22286 | Ford Windstar Upper Radiator Coolant Hose
5 customers are viewing this product
Gates Molded Coolant Hose is manufactured to fit specific applications. Similar to OEM specifications. Approved for marine applications.
- Recommend for upper, lower, by-pass, heater and other coolant hose applications.
- Heat and ozone resistant cover.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Re-engineered materials resist vacuum collapse. This reduces the need for internal springs in many applications.
- Meets SAE 20R4 and 20R3 Type EC Class D-1 and D-2 specifications.
Temperature Rating: -40° F to 275° F (-40° C to 135° C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Driven By Possibility
BRAND: Gates
FEATURES:
- Molded Coolant Hose
- Premium Molded Coolant Hose
- Premium Molded Coolant Hose
- 2003-1996 Ford, Windstar, V-6 3.8 L, Upper
SPECIFICS:
| Branch Quantity | 0 |
| Centerline Length | 683 |
| Centerline Length | 26.9 |
| Contains Spring | No |
| End 1 Inside Diameter | 1.47 |
| End 1 Inside Diameter | 37 |
| End 2 Inside Diameter | 1.47 |
| End 2 Inside Diameter | 37 |
| Material | EPDM, Plastic |
| Modular Hose | No |
| Molded | Yes |
| Number of Quick Connect Fittings | 0 |
DOWNLOADS:
INTERCHANGE:
- Ford: F68A 8B274 CD
- Ford: XF22 8B274 BA
- NAPA Belts/Hose: 8919
- Motorcraft: KM-3068
- Dayco: E71871
- Ford: XF22 8B274 BB
- Ford: F68A 8B274 CB
- Carquest: 22286
- Ford: F68A 8B274 CC
- Ford: XF2Z 8260 BA
- Goodyear: 62185
- ACDelco: 26327X
- Ford: F78A 8B274 KC
- Dayco: 71871
- Motorcraft: KM-4389
- Ford: F68Z 8260 CA
APPLICATIONS:
- 1996-2003 Ford Windstar - Position: Upper
Product type:
Aftermarket
Features and Benefits:
Our Molded Coolant Hoses are manufactured to fit upper, lower, bypass, heater and other coolant applications with OEM-quality specifications, saving you time, money and energy from going to your OE dealer for radiator hose replacements. Gates' m
Features and Benefits:
Pre-shaped to fit and to ensure perfectly sealed conditions
Features and Benefits:
EPDM tube; synthetic fiber knit reinforcement; heat-, ozone- and chemical coolant-resistant EPDM cover
Features and Benefits:
Meets requirements of SAE 20R4, class D2 and DIN 73411, class A (except for tolerances)
Features and Benefits:
Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
Features and Benefits:
Note: Gates recommends replacing hose clamps each time a new coolant hose is installed
Features and Benefits:
Caution: Do not use for fuel or oil transfer applications
Features and Benefits:
Specifically-engineered materials resist collapse under vacuum
Features and Benefits:
Engineered to resist electrochemical degradation, the leading cause of hose failure
Brand Description:
Premium Molded Coolant Hose
Centerline Length (Inch):
26.8
Centerline Length (Millimeter):
681
Branch Quantity:
0
End 1 Inside Diameter (Inch):
1.47
End 1 Inside Diameter (Millimeter):
37
End 2 Inside Diameter (Inch):
1.47
End 2 Inside Diameter (Millimeter):
37
Molded:
Yes
Short Description:
Coolant Hose
Female Nut End Thread Size (in):
No
Quick Connect Fitting Quantity:
0
Material:
EPDM, Plastic
Contains Spring:
No
Hazardous Material:
No
Minimum Order Quantity:
1
Weight - Each (Gross Pounds):
1.1946
Weight - Case (Gross Pounds):
100.6258
Height - Each (Inch):
2.9400
Life Cycle Status Description:
Announced - Part has been announced to customers on a paper “New Number Announcement”. Part is active.
Height - Case (Inch):
27.0600
Item Level GTIN:
00072053278705
Length - Each (Inch):
21.4400
Quantity Per Application:
1
Length - Case (Inch):
43.9050
Width - Each (Inch):
8.0400
Width - Case (Inch):
35.4050