×
close

Shopping Cart:

Toggle menu
1-321-400-8080

24/7 Customer Service
0

$0.00

0
Gates 18011 | HVAC Heater Hose
click to zoom in

Gates 18011 | HVAC Heater Hose

(No reviews yet) Write a Review
$11.99
Part Number
GAT18011
UPC:
72053178012
Condition:
New
5 customers are viewing this product

video gallery

Description

Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today’s smaller, tighter-fitting engine compartments. Can be used for coolant, water and air applications. Approved for marine applications.

  • Similar to OEM specifications.
  • Has all the quality features of Gates Molded Coolant Hose.
  • Engineered to resist electrochemical degradation - the leading cause of hose failure.
  • Inside diameters range from 1/4” to 1”.
  • Meets SAE 20R3 type EC Class D-1 and D-2 specifications.

Temperature rating: -40° F to 275° F (-40° C to 135° C) in coolant hose applications.

Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.

Gates - Driven By Possibility

BRAND: Gates

FEATURES:

  • Molded Heater Hose
  • Premium Molded Heater Hose
  • 2003-01 Mazda, Protege, 4-Cyl. 2.0 L, Pipe-1 To Throttle Body
  • Premium Molded Heater Hose

SPECIFICS:

Branch Quantity0
Centerline Length (in)15.6
Centerline Length (mm)396
End 1 Inside Diameter.25
End 1 Inside Diameter6
End 2 Inside Diameter6
End 2 Inside Diameter.25
MaterialEPDM
MoldedYes
Number of Quick Connect Fittings0

DOWNLOADS:

INTERCHANGE:

  • Dayco: D86501
  • Toyota: 1626111020
  • Carquest: 18011
  • Dayco: 86501
  • Toyota: 1626111040
  • Mazda: B61P13681B
  • NAPA Belts/Hose: 10011
  • Mitsubishi: MD307529
  • Suzuki: 1349152D00
  • Mazda: FSJ213682
  • Goodyear: 63234
  • Datsun/Nissan: 1405657Y15
  • General Motors: 30025413
  • ACDelco: 16000M
  • Mazda: B67513683
  • Kia: 0K24715282B
  • Suzuki: 1787167D00
  • Mazda: FSJ213681A

APPLICATIONS:

  • 1994-1994 Nissan Sentra - Position: Valve To Pipe
    • Cut to fit
  • 1995-1997 Mazda Miata - Position: Pipe-3 To Throttle Body
    • Cut to fit
  • 1989-1990 Toyota Tercel
    • Cut to fit
  • 1998-2002 Mazda 626 - Position: Throttle Body To Thermostat
  • 1994-1994 Nissan Tsuru - Position: Valve To Pipe
    • Cut to fit
  • 1992-1994 Toyota Tercel - Position: Pipe To Throttle Body
  • 2004-2006 Suzuki XL-7 - Position: Throttle Body To Engine
    • Cut to fit
  • 2001-2003 Mazda Protege - Position: Pipe-1 To Throttle Body
    • Cut to fit
  • 2004-2004 Suzuki Vitara - Position: Heater To Engine
    • Cut to fit
  • 1998-2001 Kia Sephia - Position: Pipe-4 To Throttle Body
    • Cut to fit
  • 1999-2000 Mazda Protege - Position: Throttle Body To Thermostat
  • 2001-2002 Mazda 626 - Position: Water Pump Pipe To Throttle Body
    • Cut to fit
  • 2000-2002 Mazda 626 - Position: Reservoir To Intake Manifold
    • Cut to fit
  • 1998-1998 Mazda 626 - Position: Water Pump Pipe To Throttle Body
    • Cut to fit
  • 1999-2000 Mazda Protege - Position: Pipe To Throttle Body
    • Cut to fit
  • 1994-1996 Mitsubishi Montero - Position: Throttle Body To Engine
    • Protective sleeve required; Cut to fit
  • 2000-2002 Kia Spectra - Position: Pipe-4 To Throttle Body
    • Cut to fit
  • 2001-2004 Chevrolet Tracker - Position: Heater To Engine
    • Cut to fit
  • 1999-2005 Suzuki Grand Vitara - Position: Heater To Engine
    • Cut to fit
  • 1990-1994 Mazda Miata - Position: Intake Manifold To Throttle Body
    • Cut to fit
  • 1999-2000 Mazda 626 - Position: Water Pump To Throttle Body
    • Cut to fit
  • 1988-1989 Mazda 323 - Position: Throttle Body To Pipe
    • Cut to fit
  • 2002-2003 Mazda Protege5 - Position: Pipe-1 To Throttle Body
    • Cut to fit

Attributes
Product type:
Aftermarket
Features and Benefits:
Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today’s smaller, tighter-fitting engine compartments. It can be used for coolant, water and air applications, also approved for marine applications.
Features and Benefits:
Has all the quality features of Gates molded coolant hose and similar to OEM specifications
Features and Benefits:
Engineered to resist electrochemical degradation – the leading cause of hose failure
Features and Benefits:
EPDM tube, synthetic fiber knit reinforcement, EPDM cover
Features and Benefits:
Meets SAE 20R3 Type EC Class D-1 and D-2 specifications
Features and Benefits:
Temperature Range: -40 Deg. F to 275 Deg. F (-40 Deg. C -135 Deg. C)
Features and Benefits:
Caution: Do not use for fuel or oil transfer applications
Features and Benefits:
Note: Gates recommends replacing hose clamps each time a new coolant hose is installed
Brand Description:
Premium Molded Heater Hose
Centerline Length (Inch):
15.6
Centerline Length (Millimeter):
396
Branch Quantity:
0
End 1 Inside Diameter (Inch):
.25
End 1 Inside Diameter (Millimeter):
6
End 2 Inside Diameter (Inch):
.25
End 2 Inside Diameter (Millimeter):
6
Molded:
Yes
Short Description:
Heater Hose
Quick Connect Fitting Quantity:
0
Material:
EPDM
Hazardous Material:
No
Minimum Order Quantity:
1
Weight - Each (Gross Pounds):
0.1153
Height - Each (Inch):
0.5000
Length - Each (Inch):
12.4800
Width - Each (Inch):
4.6800
Life Cycle Status Description:
Announced - Part has been announced to customers on a paper “New Number Announcement”. Part is active.
Item Level GTIN:
00072053178012
Quantity Per Application:
1



Need help? We're available at1-321-400-8080 - Email us atinfo@partsonnet.net orlive help
to top