×
close

Shopping Cart:

Toggle menu
1-321-400-8080

24/7 Customer Service
0

$0.00

0
Gates 18200 | HVAC Heater Hose
click to zoom in

Gates 18200 | HVAC Heater Hose

(No reviews yet) Write a Review
$4.99
Part Number
GAT18200
UPC:
72053178234
Condition:
New
5 customers are viewing this product

video gallery

Description

Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today’s smaller, tighter-fitting engine compartments. Can be used for coolant, water and air applications. Approved for marine applications.

  • Similar to OEM specifications.
  • Has all the quality features of Gates Molded Coolant Hose.
  • Engineered to resist electrochemical degradation - the leading cause of hose failure.
  • Inside diameters range from 1/4” to 1”.
  • Meets SAE 20R3 type EC Class D-1 and D-2 specifications.

Temperature rating: -40° F to 275° F (-40° C to 135° C) in coolant hose applications.

Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.

Gates - Driven By Possibility

BRAND: Gates

FEATURES:

  • Premium Molded Heater Hose
  • Premium Molded Heater Hose
  • 1991-1988 Honda, Civic, 4-Cyl. 1.5 L, Intake Manifold To Pipe-3
  • Molded Heater Hose

SPECIFICS:

Branch Quantity0
Centerline Length (in)7.1
Centerline Length (mm)180
End 1 Inside Diameter.31
End 1 Inside Diameter8
End 2 Inside Diameter8
End 2 Inside Diameter.31
MaterialEPDM
MoldedYes
Number of Quick Connect Fittings0

DOWNLOADS:

INTERCHANGE:

  • NAPA Belts/Hose: 10200
  • Chrysler: 4592043
  • Honda: 19504PM5A01
  • Ford: F3XY 18472 J
  • Mazda: N3A113691
  • Honda: 19504PE0000
  • Dayco: 86802
  • Mitsubishi: MD183348
  • Mitsubishi: MD089470
  • Carquest: 18200
  • ACDelco: 14018S
  • Chrysler: 4592110
  • Dayco: B86802

APPLICATIONS:

  • 1993-1997 Chrysler Concorde - Position: Tee-1 To Pipe-1
    • Cut to fit
  • 1995-1996 Mitsubishi Mirage - Position: Pipe To Throttle Body
  • 1989-1989 Mitsubishi Mirage - Position: Tee To Throttle Body
    • Cut to fit
  • 1993-1995 Mazda RX-7 - Position: Throttle Body To Pipe
    • Cut to fit
  • 1993-1997 Eagle Vision - Position: Tee-1 To Pipe-1
    • Cut to fit
  • 1986-1986 Dodge Colt - Position: Pipe To Throttle Body
    • Cut to fit
  • 1994-1997 Chrysler LHS - Position: Tee-1 To Pipe-1
    • Cut to fit
  • 1989-1996 Eagle Summit - Position: Tee To Throttle Body
    • Cut to fit
  • 1994-1996 Chrysler New Yorker - Position: Tee-1 To Pipe-1
    • Cut to fit
  • 1984-1984 Honda Civic - Position: Intake Manifold To Thermostat
    • Cut to fit
  • 1985-1985 Honda Civic - Position: Intake Manifold To Thermostat
    • Early; Cut to fit
  • 1987-1988 Plymouth Colt - Position: Tee To Throttle Body
  • 1993-1994 Mitsubishi Mirage - Position: Tee To Throttle Body
    • Cut to fit
  • 1993-1998 Mercury Villager - Position: Pipe-6 To Pipe-7
    • Cut to fit
  • 1993-1997 Dodge Intrepid - Position: Tee-1 To Pipe-1
    • Cut to fit
  • 1984-1984 Honda Wagovan - Position: Intake Manifold To Thermostat
    • Cut to fit
  • 1993-1997 Chrysler Intrepid - Position: Tee-1 To Pipe-1
    • Cut to fit
  • 1988-1991 Honda Civic - Position: Intake Manifold To Pipe-3
    • Cut to fit
  • 1989-1995 Plymouth Colt - Position: Tee To Throttle Body
    • Cut to fit
  • 1986-1986 Plymouth Colt - Position: Pipe To Throttle Body
  • 1993-1998 Nissan Quest - Position: Pipe-6 To Pipe-7
    • Cut to fit
  • 1988-1991 Honda Civic - Position: Throttle Body To Engine
    • Cut to fit
  • 1987-1988 Mitsubishi Mirage - Position: Carburetor To Intake Manifold
    • Cut to fit
  • 1991-1992 Eagle Vista - Position: Tee To Throttle Body
    • Cut to fit
  • 1987-1995 Dodge Colt - Position: Tee To Throttle Body
    • Cut to fit

Warranty Information
1-year Replacement unlimited-mileage warranty
Attributes
Product type:
Aftermarket
Features and Benefits:
Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today’s smaller, tighter-fitting engine compartments. It can be used for coolant, water and air applications, also approved for marine applications.
Features and Benefits:
Has all the quality features of Gates molded coolant hose and similar to OEM specifications
Features and Benefits:
Engineered to resist electrochemical degradation – the leading cause of hose failure
Features and Benefits:
EPDM tube, synthetic fiber knit reinforcement, EPDM cover
Features and Benefits:
Meets SAE 20R3 Type EC Class D-1 and D-2 specifications
Features and Benefits:
Temperature Range: -40 Deg. F to 275 Deg. F (-40 Deg. C -135 Deg. C)
Features and Benefits:
Note: Gates recommends replacing hose clamps each time a new coolant hose is installed
Features and Benefits:
Caution: Do not use for fuel or oil transfer applications
Brand Description:
Premium Molded Heater Hose
Centerline Length (Inch):
7.1
Centerline Length (Millimeter):
180
Branch Quantity:
0
End 1 Inside Diameter (Inch):
.31
End 1 Inside Diameter (Millimeter):
8
End 2 Inside Diameter (Inch):
.31
End 2 Inside Diameter (Millimeter):
8
Molded:
Yes
Short Description:
Heater Hose
Quick Connect Fitting Quantity:
0
Material:
EPDM
Hazardous Material:
No
Minimum Order Quantity:
1
Weight - Each (Gross Pounds):
0.0630
Height - Each (Inch):
0.6200
Length - Each (Inch):
5.6800
Width - Each (Inch):
2.1300
Life Cycle Status Description:
Announced - Part has been announced to customers on a paper “New Number Announcement”. Part is active.
Item Level GTIN:
00072053178234
Quantity Per Application:
1



Need help? We're available at1-321-400-8080 - Email us atinfo@partsonnet.net orlive help
to top