×
close

Shopping Cart:

Toggle menu
1-321-400-8080

24/7 Customer Service
0

$0.00

0
Gates 18201 | HVAC Heater Hose
click to zoom in

Gates 18201 | HVAC Heater Hose

(No reviews yet) Write a Review
$8.99
Part Number
GAT18201
UPC:
72053178241
Condition:
New
5 customers are viewing this product

video gallery

Description

Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today’s smaller, tighter-fitting engine compartments. Can be used for coolant, water and air applications. Approved for marine applications.

  • Similar to OEM specifications.
  • Has all the quality features of Gates Molded Coolant Hose.
  • Engineered to resist electrochemical degradation - the leading cause of hose failure.
  • Inside diameters range from 1/4” to 1”.
  • Meets SAE 20R3 type EC Class D-1 and D-2 specifications.

Temperature rating: -40° F to 275° F (-40° C to 135° C) in coolant hose applications.

Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.

Gates - Driven By Possibility

BRAND: Gates

FEATURES:

  • Premium Molded Heater Hose
  • Molded Heater Hose
  • 2006-00 Toyota, Tundra, V-8 4.7 L, By Pass
  • Premium Molded Heater Hose

SPECIFICS:

Branch Quantity0
Centerline Length (in)6.5
Centerline Length (mm)165
End 1 Inside Diameter7
End 1 Inside Diameter.28
End 2 Inside Diameter.28
End 2 Inside Diameter7
MaterialEPDM
MoldedYes
Number of Quick Connect Fittings0

Cut to fit

DOWNLOADS:

INTERCHANGE:

  • General Motors: 55354566
  • Datsun/Nissan: 1405640P16
  • Honda: 19528PM6000
  • ACDelco: 14019S
  • Datsun/Nissan: 1405630R19
  • NAPA Belts/Hose: 10201
  • Datsun/Nissan: 1405640P14
  • Honda: 19528P07A00
  • Datsun/Nissan: 14055D4205
  • Honda: 19507PD6000
  • Honda: 19508PV3000
  • Dayco: 86503
  • Goodyear: 63142
  • Dayco: B86503
  • Toyota: 1626150090
  • Datsun/Nissan: 1405512G02
  • Carquest: 18201

APPLICATIONS:

  • 1990-1995 Nissan Axxess - Position: Valve To Pipe-5
  • 2011-2011 Honda Ridgeline - Position: Throttle Body To Tee
  • 2008-2009 Saturn Astra - Position: Throttle Body To Engine
  • 1995-1998 Acura TL - Position: Valve-2 To Valve-3
  • 1990-1991 Honda Civic - Position: Throttle Body To Pipe
  • 1992-1994 Honda Civic - Position: Throttle Body To Engine
  • 1987-1987 Nissan Pulsar NX - Position: Thermostat To Intake Manifold
  • 2003-2009 Toyota 4Runner
  • 1998-2007 Toyota Land Cruiser
  • 2009-2009 Pontiac G3 Wave - Position: Thermostat To Throttle Body
  • 2009-2010 Pontiac G3 - Position: Thermostat To Throttle Body
  • 1990-1996 Nissan 300ZX - Position: Tee-1 To Pipe-3 (Left)
  • 1986-1989 Nissan D21 - Position: Throttle Body To Intake Manifold
  • 1998-2000 Lexus GS400
  • 1988-1989 Nissan Pulsar NX - Position: Intake Manifold To Thermostat
  • 1990-1996 Nissan 300ZX - Position: Water Inlet
  • 2009-2009 Suzuki Swift+ - Position: Thermostat To Throttle Body
  • 2000-2006 Toyota Tundra
  • 2001-2007 Toyota Sequoia
  • 2009-2011 Chevrolet Aveo - Position: Thermostat To Throttle Body
  • 2009-2011 Chevrolet Aveo5 - Position: Thermostat To Throttle Body
  • 1985-1985 Honda Accord - Position: Valve To Pipe-1
  • 1987-1989 Nissan Pathfinder - Position: Throttle Body To Intake Manifold
  • 1990-1992 Nissan Stanza - Position: Pipe To Valve
  • 1998-2007 Lexus LX470
  • 1999-2000 Lexus LS400
  • 1995-1995 Honda Civic - Position: Throttle Body To Pipe-5

Attributes
Product type:
Aftermarket
Features and Benefits:
Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today’s smaller, tighter-fitting engine compartments. It can be used for coolant, water and air applications, also approved for marine applications.
Features and Benefits:
EPDM tube, synthetic fiber knit reinforcement, EPDM cover
Features and Benefits:
Meets SAE 20R3 Type EC Class D-1 and D-2 specifications
Features and Benefits:
Temperature Range: -40 Deg. F to 275 Deg. F (-40 Deg. C -135 Deg. C)
Features and Benefits:
Note: Gates recommends replacing hose clamps each time a new coolant hose is installed
Features and Benefits:
Caution: Do not use for fuel or oil transfer applications
Features and Benefits:
Has all the quality features of Gates molded coolant hose and similar to OEM specifications
Features and Benefits:
Engineered to resist electrochemical degradation – the leading cause of hose failure
Brand Description:
Premium Molded Heater Hose
Centerline Length (Inch):
6.5
Centerline Length (Millimeter):
165
Branch Quantity:
0
End 1 Inside Diameter (Inch):
.28
End 1 Inside Diameter (Millimeter):
7
End 2 Inside Diameter (Inch):
.28
End 2 Inside Diameter (Millimeter):
7
Molded:
Yes
Short Description:
Heater Hose
Quick Connect Fitting Quantity:
0
Material:
EPDM
Hazardous Material:
No
Minimum Order Quantity:
1
Weight - Each (Gross Pounds):
0.0633
Weight - Case (Gross Pounds):
3.6630
Height - Each (Inch):
0.5600
Height - Case (Inch):
7.8750
Length - Each (Inch):
5.2000
Life Cycle Status Description:
Announced - Part has been announced to customers on a paper “New Number Announcement”. Part is active.
Length - Case (Inch):
10.8750
Item Level GTIN:
00072053178241
Width - Each (Inch):
1.9500
Quantity Per Application:
1
Width - Case (Inch):
8.8750



Need help? We're available at1-321-400-8080 - Email us atinfo@partsonnet.net orlive help
to top